PD300-003-105中文资料
PD300 300μm InGaAs Photodiode
PD300-003-0xx Ceramic Sub-Mount
PD300-003-1xx TO can Package
FEATURES
? Planar Structure
? Dielectric Passivation ? 100% Purge Burn-in ? High Responsivity
APPLICATIONS
? Communications
? Test and Measurement ? Sensing
?
Optical Power Monitors PD300-003-3xx
SC/APC Pigtail
PD300-003-5xx
FC Receptacle PRODUCT DESCRIPTION
The PD300 is an InGaAs photodiode with a photosensitive region 300μm in diameter. It is intended for use in moderate speed, low noise communication systems (up to 300Mb/s data rates) as well as applications in test and measurement and other optical power sensing devices. The large active area allows the use of multimode fiber. Reliability is assured by hermetic sealing and 100% purge burn-in (200°C, 15 hours, Vr = 15V). The device can be assembled on a ceramic sub-mount or in a TO can. It can be pigtailed with SC, FC or ST connectors (UPC or APC). It can also be mounted in an SC, ST of FC receptacle. Custom packages are an option.
ELECTRICAL CHARACTERISTICS
Table 1: Electrical Specifications
PARAMETER MIN TYP MAX UNIT
Dark Current (I D) -
0.5
5.0
nA Capacitance (Ceramic sub-mount) (1)- 4.0 4.2 pF
Capacitance (Receptacle, Pigtail, TO can) (1)- 4.2 4.4 pF
Responsivity at 1310nm (Ceramic sub-mount) 0.80 0.90 - A/W
Responsivity at 1550nm (Ceramic sub-mount) 0.85 0.95 - A/W
Responsivity at 1310nm (Receptacle, Pigtail, TO can) 0.80 0.85 - A/W
Responsivity at 1550nm (Receptacle, Pigtail, TO can) 0.85 0.90 - A/W
3dB bandwidth (50?) (Ceramic sub-mount) (1)630 660 - MHz
3dB bandwidth (50?) (Receptacle, Pigtail, TO can) (1)600 630 - MHz
Optical Return Loss (Pigtail using SMF-28) 50 55 - dB
Optical Return Loss (Receptacle, APC connector) 40 45 - dB
Operating voltage - 5 15 V
(1) 5V bias voltage
PD300
Rev 1.0
2
Table 2: Absolute Maximum Ratings
PARAMETER MIN MAX UNIT Forward Current - 25 mA Reverse Current - 5000 μA Reverse Voltage - 20 V Optical input power - 5 mW Operating Case Temperature -40 +85 oC Storage Temperature -40 +85 oC Soldering temperature (10 seconds) - +250 oC
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
PACKAGE DIMENSIONS – PD300-003-100 and PD300-003-105
Dimensions: INCHES [mm]
ORDERING INFORMATION
Table 3: Standard
Part Number Options
PD300-003-100 TO46, 3pin, non AR coated, gold plated lens cap PD300-003-105
TO46, 3pin, non AR coated, gold plated flat window cap
Table 4: Custom
Part Number Options
PD300-003-0xx Custom defined size and electrical layout.
PD300-003-1xx Package: TO46, TO56, 2 or 3 pin.
Cap: Window or lens. AR or Non-AR coated. Gold or nickel plated. PD300-003-3xx Pigtailed: TO46, 2 or 3 pin. Fiber length, 0.5 meter, 1.0 meter Fiber type: Multimode, single mode (SMF-28) or custom supplied
Connector Type: SC, ST or FC. APC or UPC PD300-003-5xx
Receptacle, 2 or 3 pin. SC, ST or FC aligned
Please contact Anadigics for the specific part number and pinout that suits your needs
ANADIGICS, Inc.
829 Flynn Road
Camarillo, California 93012, U.S.A. Tel: +1 (805) 445-4500 Fax: +1 (805) 445-4502
URL: https://www.wendangku.net/doc/d77112325.html, E-mail: Mktg@https://www.wendangku.net/doc/d77112325.html,
I MPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited.