Technical Data Sheet
Full Color Chip LEDs
15-23B/R6G6BHC-A01/2T Features
?Package in 8mm tape on 7〞diameter reel.
?Compatible with automatic placement equipment.
?Compatible with infrared and vapor phase reflow
solder process.
?Full-color type.
Descriptions
?The 15-23B SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
?Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
?Automotive: backlighting in dashboard and switch.
?Telecommunication: indicator and backlighting in
telephone and fax.
?Flat backlight for LCD, switch and symbol.
?General use.
Device Selection Guide
Chip
Lens Color Type Material Emitted
Color
Red
R6 AlGaInP Brilliant
Water Clear G6 InGaN Brilliant Yellow Green
BH InGaN Blue
15-23B/R6G6BHC-A01/2T Package Outline Dimensions
Notes: Tolerances Unless Dimension ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 2 of 12
15-23B/R6G6BHC-A01/2T
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 3 of 12
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit Reverse Voltage V R 5 V
Forward Current
I F
R6:25
G6:25 BH:25
mA
Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature
Tsol
260 (for 5 seconds) ℃ Electrostatic Discharge
ESD
R6:2000
G6:150 BH:150 V Power Dissipation
Pd
R6:60
G6:110 BH:110
mW Peak Forward Current (Duty 1/10 @1KHz)
I F P
R6:60
G6:100 BH:100
mA
15-23B/R6G6BHC-A01/2T
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 4 of 12
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol Min. Typ. Max. Unit
Condition
Luminous Intensity
R6
Iv G6 BH
72 28.5 28.5 100 50 50 180 90 90
mcd
Viewing Angle 2θ1/2 ----- 120 ----- deg Peak Wavelength
R6
λp G6 BH
----- 632 575 468 ----- nm
Dominant Wavelength
R6
λd G6 BH 619 568 465
----- 629 575 480
nm
Spectrum Radiation
Bandwidth
R6
△λ G6 BH
----- 20
20 25
----- nm
Forward Voltage
R6
V F G6
BH
-----
2.0 2.0
3.5
2.4
2.4
3.9
V
I F =20mA
Reverse Current
R6
I R G6
BH
----- ----- 10
10
50
μA
V R =5V
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
15-23B/R6G6BHC-A01/2T Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 5 of 12
15-23B/R6G6BHC-A01/2T Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 6 of 12
15-23B/R6G6BHC-A01/2T Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 7 of 12
15-23B/R6G6BHC-A01/2T
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 8 of 12 Label explanation
CAT: Luminous
REF:
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
15-23B/R6G6BHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 9 of 12
15-23B/R6G6BHC-A01/2T
Everlight Electronics Co., Ltd. https://www.wendangku.net/doc/dd7920253.html, Rev 1.0 Page: 10 of 12
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level :90% LTPD :10%
No. Items Test Condition Test Hours/Cycles Sample
Size
Ac/Re
1 Reflow Soldering Temp. : 240℃±5℃
5sec. 6 Min. 22 PCS.0/1
2 Temperature Cycle H : +100℃ 15min
∫ 5 min
L : -40℃ 15min 300 Cycles 22 PCS.0/1
3 Thermal Shock H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS.0/1 4
High Temperature
Storage
Temp. : 100℃ 1000 Hrs. 22 PCS.0/1 5
Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS.0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS.0/1 7 High Temperature /
High Humidity
85℃/R.H85%
1000 Hrs. 22 PCS.
0/1
分销商库存信息: EVERLIGHT
15-23B/R6G6BHC-A01/2T