1/8
April 2001s HIGH SPEED: t PD = 4.5ns (TYP.) at V CC = 5V s
LOW POWER DISSIPATION:I CC = 2μA(MAX.) at T A =25°C
s
COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.)s
50? TRANSMISSION LINE DRIVING CAPABILITY
s
SYMMETRICAL OUTPUT IMPEDANCE:|I OH | = I OL = 24mA (MIN)
s
BALANCED PROPAGATION DELAYS:t PLH ? t PHL
s
OPERATING VOLTAGE RANGE:V CC (OPR) = 4.5V to 5.5V
s
PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 08
s
IMPROVED LATCH-UP IMMUNITY
DESCRIPTION
The 74ACT08 is an advanced high -speed CMOS QUAD 2-INPUT AND GATE fabricated with sub-micron silicon gate and double-layer metal wiring C 2MOS tecnology.
The internal circuit is composed of 2 stages including buffer output, which enables high noise immunity and stable output.
The device is designed to interface directly High Speed CMOS systems with TTL, NMOS and CMOS output voltage levels.
All inputs and outputs are equipped with protec-tion circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
74ACT08
QUAD 2-INPUT AND GATE
PIN CONNECTION AND IEC LOGIC SYMBOLS
ORDER CODES
PACKAGE TUBE T & R DIP 74ACT08B SOP 74ACT08M
74ACT08MTR TSSOP
74ACT08TTR
74ACT08
2/8
INPUT AND OUTPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
TRUTH TABLE
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied.
RECOMMENDED OPERATING CONDITIONS
1) V IN from 0.8V to 2.0V
PIN No SYMBOL NAME AND FUNCTION 1, 4, 9, 121A to 4A Data Inputs 2, 5, 10, 131B to 4B Data Inputs 3, 6, 8, 11
1Y to 4Y Data Outputs 7
GND Ground (0V)
14
V CC
Positive Supply Voltage
A B Y L L L L H L H L L H
H
H
Symbol Parameter
Value Unit V CC Supply Voltage -0.5 to +7V V I DC Input Voltage -0.5 to V CC + 0.5V V O DC Output Voltage -0.5 to V CC + 0.5
V I IK DC Input Diode Current ± 20mA I OK DC Output Diode Current ± 20mA I O
DC Output Current
± 50mA I CC or I GND DC V CC or Ground Current
± 200mA T stg
Storage Temperature -65 to +150
°C T L
Lead Temperature (10 sec)
300
°C
Symbol Parameter
Value Unit V CC Supply Voltage 4.5 to 5.5V V I Input Voltage 0 to V CC V V O Output Voltage 0 to V CC V T op Operating Temperature
-55 to 125
°C dt/dv
Input Rise and Fall Time V CC = 4.5 or 5.5V (note 1)
8
ns/V
74ACT08
3/8
DC SPECIFICATIONS
2) Incident wave switching is guaranteed on trasmission lines with impedances as low as 50?
AC ELECTRICAL CHARACTERISTICS (C L = 50 pF, R L = 500 ?, Input t r = t f = 3ns)
(*) Voltage range is 5.0V ± 0.5V
CAPACITIVE CHARACTERISTICS
1) C PD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. I CC(opr) = C PD x V CC x f IN + I CC /4 (per gate)
Symbol
Parameter
Test Condition
Value Unit
V CC (V)T A = 25°C -40 to 85°C -55 to 125°C Min.Typ.Max.
Min.Max.
Min.Max.
V IH High Level Input Voltage
4.5V O = 0.1 V or V CC -0.1V 2.0 1.5 2.0 2.0V
5.5 2.0
1.5
2.0
2.0
V IL Low Level Input Voltage
4.5V O = 0.1 V or V CC -0.1V 1.50.80.80.8
5.5 1.50.8
0.8
0.8
V
V OH
High Level Output Voltage
4.5I O =-50 μA 4.4 4.49 4.4 4.4
5.5I O =-50 μA 5.4 5.49
5.4 5.44.5I O =-24 mA 3.86 3.76 3.7V
5.5
I O =-24 mA 4.86
4.76
4.7
V OL
Low Level Output Voltage
4.5I O =50 μA 0.0010.10.10.1
5.5I O =50 μA 0.001
0.10.10.14.5I O =24 mA 0.360.440.55.5
I O =24 mA 0.360.440.5I I Input Leakage Cur-rent
5.5V I = V CC or GND ± 0.1
± 1± 1μA I CCT Max I CC /Input 5.5V I = V CC - 2.1V 0.6
1.5 1.6mA I CC Quiescent Supply Current
5.5V I = V CC or GND 2
2080μA I OLD Dynamic Output Current (note 1, 2)
5.5
V OLD = 1.65 V max 7550mA I OHD
V OHD = 3.85 V min
-75
-50
mA Symbol
Parameter
Test Condition
Value
Unit
V CC (V)
T A = 25°C -40 to 85°C -55 to 125°C Min.Typ.Max.Min.Max.Min.Max.t PLH t PHL Propagation Delay
Time
5.0(*)
1.5
4.5
8.0
1.0
9.0
1.0
9.0
ns
Symbol
Parameter
Test Condition
Value Unit
V CC (V)T A = 25°C -40 to 85°C -55 to 125°C Min.
Typ.Max.
Min.
Max.
Min.
Max.
C IN Input Capacitance 5.04pF C PD
Power Dissipation Capacitance (note 1)
5.0
f IN = 10MHz
30
pF
74ACT08
4/8
TEST CIRCUIT
C L = 50pF or equivalent (includes jig and probe capacitance)R L = R 1 = 500? or equivalent
R T = Z OUT of pulse generator (typically 50?)
WAVEFORM: PROPAGATION DELAYS
(f=1MHz; 50% duty cycle)
74ACT08
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
? The ST logo is a registered trademark of STMicroelectronics
? 2001 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco
Singapore - Spain - Sweden - Switzerland - United Kingdom
? https://www.wendangku.net/doc/dc12938641.html,
8/8