LPS4018-333MLC中文资料

Core material Ferrite

Core and winding loss See https://www.wendangku.net/doc/e911022415.html,/coreloss

Terminations RoHS compliant silver-palladium-platinum-glass frit.Other terminations available at additional cost.Weight 54 – 64 mg

Ambient temperature –40°C to +85°C with I rms current, +85°C to +125°C with derated current

Storage temperature Component: –40°C to +125°C.Packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL)1 (unlimited floor life at <30°C /85% relative humidity)

Mean Time Between Failures (MTBF)26,315,789 hours

Packaging 1000/7″ reel; 3500/13″ reel Plastic tape:12 mm wide,0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth Recommended pick and place nozzle OD: 4 mm;ID: ≤ 2 mm PCB washing Only pure water or alcohol recommended

1.Please specify termination and packaging codes:LPS4018-223M LC

Termination:L =RoHS compliant silver-palladium-platinum-glass frit.Special order:

T = RoHS tin-silver-copper (95.5/4/0.5)or S = non-RoHS tin-lead (63/37).

Packaging:C =7″ machine-ready reel. EIA-481

embossed plastic tape (1000 parts per full reel).

B =Less than full reel. In tape, but not

machine ready.

To have a leader and trailer added ($25 charge), use code letter C instead.

D =13″ machine-ready reel. EIA-481

embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).

2.Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz.

3.DCR measured on a micro-ohmmeter.

4.SRF measured using Agilent/HP 8753ES or equivalent.

5.DC current that causes the specified inductance drop from its value without current.

6.Current that causes the specified temperature rise from 25°C ambient.

7.Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components”before soldering.

DCR SRF

I sat (A)5

I rms (A)6Inductance 2max 3typ 410%20%30%

20°C 40°C Part number 1(μH)(Ohms)(MHz)drop drop drop rise rise LPS4018-561ML_0.56 ±20%0.030250 4.8 5.2 5.3 1.9 2.8LPS4018-102NL_ 1.0 ±30%0.040180 2.8 3.0 3.1 1.8 2.7LPS4018-222ML_ 2.2 ±20%0.07090 2.7 2.8 2.9 1.6 2.3LPS4018-332ML_ 3.3 ±20%0.08075 2.1 2.3 2.4 1.4 2.0LPS4018-472ML_ 4.7 ±20%0.12565 1.8 1.9 1.9 1.3 1.8LPS4018-682ML_ 6.8 ±20%0.15050 1.2 1.3 1.3 1.0 1.5LPS4018-103ML_10 ±20%0.20040 1.1 1.2 1.30.90 1.25LPS4018-153ML_15 ±20%0.260320.860.910.940.80 1.12LPS4018-183ML_18 ±20%0.270270.780.830.850.70 1.00LPS4018-223ML_22 ±20%0.360260.740.800.830.650.90LPS4018-333ML_33 ±20%0.420200.580.640.680.550.80LPS4018-473ML_47 ±20%0.650160.510.550.560.450.68LPS4018-683ML_68 ±20%0.950130.410.450.460.400.56LPS4018-104ML_100 ±20% 1.40100.340.360.370.350.50LPS4018-124ML_120 ±20% 1.609.00.310.330.340.300.45LPS4018-154ML_150 ±20% 2.008.00.270.290.300.280.40LPS4018-184ML_180 ±20% 2.507.50.240.260.270.260.36LPS4018-224ML_220 ±20% 3.70 6.50.210.2250.2350.200.30LPS4018-334ML_330 ±20% 5.90 5.50.180.190.200.170.23LPS4018-474ML_470 ±20%7.10 4.50.140.160.170.150.20LPS4018-564ML_560 ±20%10.0 4.00.130.140.150.140.18LPS4018-684ML_680 ±20%11.5 3.50.120.130.140.120.16LPS4018-824ML_820 ±20%14.0 2.90.110.120.130.100.14LPS4018-105ML_1000 ±20%16.5 2.80.100.110.110.0980.125LPS4018-155ML_1500 ±20%25.0 2.40.0950.100.1050.0800.110LPS4018-185ML_1800 ±20%31.5 2.30.0900.0950.1000.0700.095LPS4018-225ML_2200 ±20%32.5 2.10.0880.0990.1000.0700.090LPS4018-335ML_

3300 ±20%48.0

1.6

0.082

0.092

0.094

0.055

0.075

?Very low DCR; excellent current handling ?4.0 × 4.0 mm footprint; less than 1.8 mm tall

– LPS4018 Series

Typical L vs Current

Frequency (MHz)I n d u c t a n c e (μH )

Current (A)

I n d u c t a n c e (μH )

P e r c e n t o f r a t e d c u r r e n t

contact Coilcraft or visit https://www.wendangku.net/doc/e911022415.html, .