?Ultra Low ESR < 30 m Ω
?New E/7260 Case with ESR < 18 m Ω?Up to 5 Amps ripple current
?RoHS Compliant & Leadfree Termination (see
www. https://www.wendangku.net/doc/eb14155527.html, for lead transitions)?
Operating Temperature: -55?C to +125?C
?100% accelerated steady-state aging ?100% Surge current test
?Precision - molded, laser-marked case ?Symmetrical compliant terminations ?
Taped and reeled per EIA 481-1
FEATURES
CATHODE (-) END
SIDE VIEW
ANODE (+) END
BOTTOM VIEW
E F
A L
Termination Option,either end
OUTLINE DRAWING
(Inches)
0.10± 0.10(.004± .004)X (Ref)
P (Ref)R (Ref)T (Ref)A (Min)G (Ref)E (Ref)
0.9(.035) 1.0(.039)0.13(.005) 3.8(.150) 3.5(.138) 3.5(.138)
(.006)
0.10± 0.10(.004± .004)0.9(.035) 1.0(.039)0.13(.005) 3.8(.150) 3.5(.138) 3.5
(.138)
?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
T510 SERIES—High Capacitance-Low ESR
T510 RATINGS & PART NUMBER REFERENCE
T510 ORDERING INFORMATION
25°C 85°C 125°C
680.0X T510X687(1)004A(2)E03027.2 6.030.0 3.0 2.7 1.21000.0
X
T510X108(1)004A(2)E018
40.0
6.0
18.0 3.9
3.5
1.5
1000.0E T510E108(1)004A(2)E01840.0 6.018.0 4.0 3.6 1.6
1000.0E T510E108(1)004A(2)E01040.0 6.010.0 5.3 4.8 2.1470.0X T510X477(1)006A(2)E03028.2 6.030.0 3.0 2.7 1.2
680.0E T510E687(1)006A(2)E02340.8 6.023.0 3.5 3.2 1.4680.0E T510E687(1)006A(2)E01240.8 6.012.0 4.8 4.3 1.9330.0X T510X337(1)010A(2)E03533.0 6.035.0 2.8 2.5 1.1150.0X T510X157(1)016A(2)E04024.0 6.040.0 2.6 2.3 1.0220.0X T510X227(1)016A(2)E04035.210.040.0 2.6 2.3 1.0220.0X T510X227(1)016A(2)E02535.210.025.0 3.3 3.0 1.3100.0X T510X107(1)020A(2)E04020.0 6.040.0 2.6 2.3 1.0
100.0E T510E107(1)025A(2)E05025.08.050.0 2.4 2.1 1.022.0X T510X226(1)035A(2)E0807.7 6.080.0 1.8 1.70.733.0X T510X336(1)035A(2)E06511.6 6.065.0 2.0 1.80.8
33.0X T510X336(1)035A(2)E05011.6 6.050.0 2.3 2.10.947.0X T510X476(1)035A(2)E05516.58.055.0 2.2 2.00.947.0E T510E476(1)035A(2)E05016.58.050.0 2.4 2.1 1.0Capaci-tance μF Case Size 25 Volt Rating at +85°C (17 Volt Rating at 125°C)DC Leakage μA @ 25°C Max DF %@ 25°C Max ESR m :
@ 25°C 100 kHz Max Ripple Current A rms @ 25°C 100 kHz, max
KEMET Part Number 50 Volt Rating at +85°C (33 Volt Rating at 125°C)
35 Volt Rating at +85°C (23 Volt Rating at 125°C)4 Volt Rating at +85°C (2.7 Volt Rating at 125°C)
6/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C)10 Volt Rating at +85°C (7 Volt Rating at 125°C)16 Volt Rating at +85°C (11 Volt Rating at 125°C)
20 Volt Rating at +85°C (13.4 Volt Rating at 125°C)Lead Material
T = 100% Tin (Sn) Plated
H = (Sn) Solder-Coated (90% Sn/10% Pb)G = Gold Plated
S = Not Recommended for new design
T
ESR
E030 = ESR in Milliohmns = 30 mOhms
Failure Rate
A = Not Applicable
41
S o l i d T a n t a l u m S u r f a c e M o u n t
030
25°C 85°C 125°C
680.0X
T510X687(1)004A(2)E03027.2 6.030 3.0 2.7 1.2
1000.0X T510X108(1)004A(2)E01840.0 6.018 3.9 3.5 1.5
1000.0X T510X108(1)004A(2)E02340.0 6.023 3.4 3.0 1.31000.0E T510E108(1)004A(2)E01840.0 6.018 4.0 3.6 1.61000.0E T510E108(1)004A(2)E01040.0 6.010 5.3 4.8 2.1470.0X T510X477(1)006A(2)E03028.2 6.030 3.0 2.7 1.2680.0X T510X687(1)006A(2)E02342.8 6.023 3.4 3.1 1.4680.0E T510E687(1)006A(2)E02340.8 6.023 3.5 3.2 1.4680.0E T510E687(1)006A(2)E01240.8 6.012 4.8 4.3 1.9330.0X T510X337(1)010A(2)E03533.0 6.035 2.8 2.5 1.1150.0X T510X157(1)016A(2)E03024.0 6.030 3.0 2.7 1.2150.0X T510X157(1)016A(2)E04024.0 6.040 2.6 2.3 1.0220.0X T510X227(1)016A(2)E04035.210.040 2.6 2.3 1.0220.0
X
T510X227(1)016A(2)E02535.210.025 3.3 3.0 1.3Cap μF
Case
Size
4 Volt Rating at +85°C (2.7 Volt Rating at 125°C)6/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C)10 Volt Rating at +85°C (7 Volt Rating at 125°C)16 Volt Rating at +85°C (11 Volt Rating at 125°C)DC Leakage μA @+25°C Max DF %@ +25°C 120Hz
Max
ESR m Ω@ +25°C 100 kHz Max Ripple Current Arms @ +25°C,100 kHz, max KEMET
Part Number
25°C 85°C 125°C
100.0X T510X107(1)020A(2)E03520.08.035.07.7
6.9 3.1100.0X T510X107(1)020A(2)E04020.0 6.040.0 2.6 2.3 1.0100.0X T510X107(1)020A(2)E04520.0 6.045.0 2.4 2.20.9100.0E T510E107(1)025A(2)E05025.08.050
2.4 2.1 1.022.0X T510X226(1)035A(2)E1007.7 6.0100 1.6 1.40.622.0X T510X226(1)035A(2)E0807.7 6.080 1.8 1.70.722.0X T510X226(1)035A(2)E0607.7 6.060
2.1 1.90.83
3.0X T510X336(1)035A(2)E06511.6 6.065 2.0 1.80.833.0X T510X336(1)035A(2)E05011.6 6.050
2.3 2.10.947.0X T510X476(1)035A(2)E05516.58.055
2.2 2.00.947.0X T510X476(1)035A(2)E06516.58.065
2.0 1.80.847.0E T510E476(1)035A(2)E05016.58.050 2.4 2.1 1.010.0X T510X106(1)050A(2)E120 5.08.0120
1.5 1.30.610.0X T510X106(1)050A(2)E090 5.08.090
1.7
1.6
0.7
Case Size KEMET
Part Number 50 Volt Rating at +85°C (33 Volt Rating at 125°C)35 Volt Rating at +85°C (23 Volt Rating at 125°C)20 Volt Rating at +85°C (13.4 Volt Rating at 125°C)Cap μF 25 Volt Rating at +85°C (17 Volt Rating at 125°C)DC Leakage μA @ +25°C Max DF %
@ +25°C 120Hz Max
ESR m Ω@ +25°C 100 kHz
Max Ripple Current Arms @ +25°C,100 kHz, max (1) To complete KEMET part number insert "K" - ±10% or "M" - ±20% capacitance tolerance. (2) To complete KEMET part number, insert H (SnPb) or T - 100% tin.25°C 85°C 125°C 680.0X T510X687(1)004A(2)E03027.2 6.030 3.0 2.7 1.21000.0X T510X108(1)004A(2)E01840.0 6.018 3.9 3.5 1.51000.0X T510X108(1)004A(2)E02340.0 6.023 3.4 3.0 1.31000.0E T510E108(1)004A(2)E01840.0 6.018 4.0 3.6 1.61000.0E T510E108(1)004A(2)E01040.0 6.010 5.3 4.8 2.1470.0X T510X477(1)006A(2)E03028.2 6.030 3.0 2.7 1.2680.0X T510X687(1)006A(2)E02342.8 6.023 3.4 3.1 1.4680.0E T510E687(1)006A(2)E02340.8 6.023 3.5 3.2 1.4680.0E T510E687(1)006A(2)E01240.8 6.012 4.8 4.3 1.9330.0X T510X337(1)010A(2)E03533.0 6.035 2.8 2.5 1.1150.0X T510X157(1)016A(2)E03024.0 6.030 3.0 2.7 1.2150.0X T510X157(1)016A(2)E04024.0 6.040 2.6 2.3 1.0220.0X T510X227(1)016A(2)E04035.210.040 2.6 2.3 1.0220.0X T510X227(1)016A(2)E02535.210.025 3.3 3.0 1.3DC Leakage μA @+25°C Max DF %@ +25°C 120Hz Max ESR m Ω@ +25°C 100 kHz Max Ripple Current Arms @ +25°C,100 kHz, max 4 Volt Rating at +85°C (2.7 Volt Rating at 125°C)6/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C)10 Volt Rating at +85°C (7 Volt Rating at 125°C)16 Volt Rating at +85°C (11 Volt Rating at 125°C)Cap μF Case Size KEMET Part Number This termination code not available
effective 15 July 2007.
VOLTAGE
?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
T510 SERIES—High Capacitance
TYPICAL CAP FREQUENCY SCAN @ 25°C
T510E108M004AS
TYPICAL ESR/Z FREQUENCY SCAN @ 25T510E108M004AS
C a p a c i t a n c e (μF )
100Hz
1kHz
10kHz
100kHz
1MHz
500600700800900100011001200
1300
1400
1500100Hz
1kHz 10kHz 100kHz 1MHz
.01
E S R ( ) Z ( ) (Ω)
.1
1
10
100Hz
1kHz 10kHz 100kHz 1MHz
.01
E S R ( ) Z ( ) (Ω)
.1
1
10
050100150200250300350400
450500C a p a c i t a n c e (μF )
100Hz
1kHz
10kHz
100kHz
1MHz
TYPICAL ESR/Z FREQUENCY SCAN @25?C
T510X477M006AS
T510X477M006AS
T510
CAPACITOR MARKINGS
4776K 514
M+Ultra-Low ESR Device
Picofarad Code KEMET
I. D. Symbol Rated Voltage 1st Digit =Year
2nd & 3rd Digits
= Week
Polarity
Indicator (+)(Solid Stripe)“514” = The 14th week
of 2005.
42
4776V
Lot Code
Picofarad Code K Voltage Date Code V5 49
Date Code Month 1 = Jan 7 = Jul 2 = Feb 8= Aug 3 = Mar 9 = Sep 4 = Apr
10 = Oct
5 = May 11 = Nov
6 = Jun 12 = Dec
Date Code Year S = 2004T = 2005U = 2006V = 2007W = 2008X = 2009
M+
KEMET Organic
CAPACITOR ALTERNATE MARKINGS
?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Tape & Reel Packaging
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems.
Right Hand Orientation Only
(+)
(–)
Embossed Carrier
Embossment
Top T ape Thickness
.10mm (.004") Max Thickness
8mm ±.30(.315±.012")or
12mm ±.30(.472±.012")
178mm (7.00")or 330mm (13.00")8mm (0.315")or
12mm (0.472")180mm (7.0")
330mm (13.0")
QUANTITIES PACKAGED PER REEL
Case Code Tape
KEMET EIA Width-mm
7" Reel*13" Reel*R 2012-1282,50010,000S 3216-1282,50010,000T 3528-1282,50010,000U 6032-15121,0005,000W 7343-15121,0003,000V 7343-20121,0003,000A 3216-1882,0009,000B 3528-2182,0008,000C 6032-28125003,000D 7343-31125002,500Y 7343-40125002,000X 7343-43125002,000E 7260-38
12
500
2,000
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel https://www.wendangku.net/doc/eb14155527.html,beling:Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
TANTALUM AND ALUMINUM CHIP CAPACITORS
Packaging Information
92
Performance Notes
1.Cover Tape Break Force: 1.0 Kg Minimum.
2.Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 Newton to 1.0 Newton (10g to 100g)12 mm 0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165?to 180?from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3.Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")reels (with C-7280). Note that 13” reels are preferred.
https://www.wendangku.net/doc/eb14155527.html,beling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
NOTES
1.B1 dimension is a reference dimension for tape feeder clearance only.
2.The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other.
3.Tape with components shall pass around radius “R ” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4.The cavity defined by A ,B ,and K shall be configured to surround the part with sufficient clearance such that the chip does not pro-Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)
Constant Dimensions — Millimeters (Inches)
Tape Size D 0
E
P 0
P 2
T Max T 1Max 8 mm 1.5 1.75 ±0.10 4.0 ±0.10 2.0 ±0.050.6000.100and +0.10 -0.012 mm
(0.059(0.069 ±0.004)(0.157 ±0.004)
(0.079 ±0.002)
(0.024)
(0.004)
+0.004, -0.0)Variable Dimensions — Millimeters (Inches)
Tape Size Pitch B 1Max.D 1Min.F P 1
R Min.T 2Max W A 0B Note 1Note 2Note 3Note 4
8 mm
Single 4.4 1.0
3.5 ±0.05
4.0 ±0.10
25.0
2.58.0 ±0.30(4 mm)
(0.173)
(0.039)(0.138 ±0.002)(0.157 ±0.004)(0.984)(0.098)
(.315 ±0.012)
12 mm
Double 8.2 1.5 5.5 ±0.058.0 ±0.1030.0 4.612.0 ±0.30(8 mm)
(0.323)
(0.059)(0.217 ±0.002)
(0.315 ±0.004)(1.181)
(0.181)(0.472 ±0.012)
Packaging Information
?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300Embossed Carrier Tape Configuration (cont.)
Sketch D: Tape Camber (Top View)
Allowable camber to be 1 mm/250 mm.
250mm (9.843)
1mm (0.039) Max.
(Metric will govern)
Reel Dimensions (Metric Dimensions will govern)
N Min W 1W 2Max W 3
50.08.414.47.9 Min (1.969)+1.5, -0.0(0.567)(0.311)See (0.33110.9 Max Note 3+0.059, -0.0)
(0.429)Table 1
12.418.411.9 Min Packaging Information
400mm (15.75) Min.
20°
95