修改EMC SP地址

1, modify SPA IP setting

1) access https://192.168.10.10/setup

2) modify IP paramters --

'IP Address' from 192.168.10.10 to 192.168.1.5
'subnet mask' from 255.255.255.0 to 255.255.255.192
'Gateway' from 192.168.10.254 to 192.168.1.62

click 'Apply Settings'.
select 'yes' for 'Are you sure you wish to continue?', then click 'Submit'.

the web page will be unavailable for a few minutes.

3) access https://192.168.1.5/setup
click 'Restart Management Server'.

the web page will be unavailable for a few minutes.


2, modify SPB IP setting

1) access https://192.168.10.11/setup

2) modify IP paramters --

'IP Address' from 192.168.10.11 to 192.168.1.6
'subnet mask' from 255.255.255.0 to 255.255.255.192
'Gateway' from 192.168.10.254 to 192.168.1.62

click 'Apply Settings'.
select 'yes' for 'Are you sure you wish to continue?', then click 'Submit'.

the web page will be unavailable for a few minutes.

3) access https://192.168.1.6/setup
click 'Restart Management Server'.

the web page will be unavailable for a few minutes.


3, verify

access CX3-40 start page using new IP address at http://192.168.1.5/start.html