文档库 最新最全的文档下载
当前位置:文档库 › 2007年第1期海船船员适任证书全国统考试题

2007年第1期海船船员适任证书全国统考试题

2007年第1期海船船员适任证书全国统考试题
2007年第1期海船船员适任证书全国统考试题

2007年第1期海船船员适任证书全国统考试题(航海英语) 适用对象:沿海航区船舶二/三副

作者:不详新闻出处:不详发表时间:2008年9月8日

中华人民共和国海事局

2007年第1期海船船员适任证书全国统考试题(总第42期)

科目:航海英语试卷代号:905

适用对象:沿海航区船舶二/三副

(本试卷卷面总分100分,及格分为70分,考试时间100分钟)

答题说明:请选择一个最合适的答案,并将该答案按答题卡要求,在相应位置上用2B铅

笔涂黑。第1题至80题,每题1分,第81题至84题,每题5分。

一.单项选择题

1. Mariners are to ensure that charts and publications are ______.

A. kept corrected

B. kept correctedly

C. keeping corrected

D. keeping correctedly

2. Charted depths ______ by 2 meters due to state of the winds.

A. is decreased

B. decreased

C. decreases

D. are decreased

3. Charts are subject to frequent correction according to ______.

A. Notices to Mariners

B. Mariner's handbook

C. Sailing Directions

D. Guide to Port Entry

4. Merchant vessels can operate in three basic ways, but ______ is not one of them.

A. liners

B. voyage charter

C. time charter

D. general carrier

5. Your ship must speed up.

A. reduce speed

B. increase speed

C. change speed

D. stop engine

6. The quartermaster is ______ the wheel.

A. at

B. in

C. on

D. for

7. The expression Stand-by engine means:______.

A. to get the engine ready

B. to respond to the engine

C. to maneuver the engine

D. to change the engine

8. The ship has a speed of more than 14 ______ at 120 ______.

https://www.wendangku.net/doc/f44937494.html,es/r.m.p

https://www.wendangku.net/doc/f44937494.html,es/r.p.m

C.knots/r.p.m

D.knots/r.m.p

9. Mooring lines both ______ were let go.

A.for and aft

B.from and aft

C.all and after

D.fore and aft

10. Are we going ______ a wharf?

A. along

B. to

C. alongside

D. against

11. ______ ready for mooring.

A. Do

B. Have

C. Make

D. Get

12. Please ______ all the lines,the vessel is just in her position of the berth now.

A. pay out

B. make fast

C. shorten

D. hold on

13. This is ______ where we shall anchor.

A. the light-house

B. the anchorage

C. the pilot station

D. the light-buoy

14. That ship anchored too close ______ my vessel.

A. in

B. to

C. on

D. at

15. The quays are connected ______ the railway system.

A. for

B. to

C. with

D. from

16. The expression drop anchor means ______ .

A. hold anchor

B. leave anchor

C. let go anchor

D. weigh anchor

17. My ship ______ that port next month.

A. calls at

B. has called at

C. call at

D. will call at

18. My ship is bound for Shanghai, with dangerous cargo on board.

A. without

B. loading

C. discharging

D. carrying

19. The dunnage planks are ______ more enough.

A. so

B. too

C. far

D. very

20. Let ______ the real fact of the accident.

A. I tell you

B. me to tell you

C. I to tell you

D. me tell you

21. Our ship is more than 150 meters in ______ .

A. height

B. breadth

C. depth

D. length

22. I am proceeding ______ reduced speed.

A. at

B. with

C. on

D. within

23. I have ______ damage below water line.

A. small

B. little

C. unimportant

D. minor

24. SECURITE is to be used to announce ______.

A. a distress message

B. an urgency message

C. a safety message

D. a massage of SMCP

25. Please ______ search and rescue.

A. make command of

B. take command of

C. get command of

D. have command of

26. The vessel on the same course will ______ on your port side.

A. cross

B. overtake

C. catch up

D. run down

27. Inclination(倾斜) of the vessel to port side or starboard side defines ______.

A. Tip

B. Capsize

C. List

D. Trim

28. The tweendeck type of vessel has ______ below the main deck.

A. another deck

B. two other decks

C. no deck

D. additional deck

29. Please arrange the survey ______ early.

A. to be carried out

B. carry out

C. be carried out

D. will carry out

30. I am ______ fire and have dangerous cargo on board.

A. on

B. in

C. at

D. with

31. Forecastle deck is located in the ship's ______ .

A. bow stem

B. stern

C. portside

D. starboard side

32. The system of derricks and winches has been largely replaced on newer ships by cranes ______ it is very efficient.

A. when

B. because

C. unless

D. though

33. We'll put off ______ until Friday.

A. to discharge

B. discharge

C. discharging

D. to be discharging

34. There are some navigational instruments ______ the bridge.

A. in

B. on

C. at

D. of

35. Windward means:

A. direction to wind

B. direction against wind

C. wind direction

D. variable direction

36. Roll-on/roll-off ships are equipped with ______.

A. cargo elevators

B. conveyor belts

C. ramps

D. derricks and winches for cargo handling

37. Seafarers usually use the FTC control of a radar _____.

A. making a landfall

B. to test the radar receiver

C. during rain or snow

D. when crossing the 180th meridian

38. At earliest indication of fire aboard your vessel, you first______.

A. locate the fire

B. determine which type of fire is burning

C. sound alarm

D. fight the fire

39. The portable radio apparatus means:

A. the radio apparatus fitted on the portside

B. the radio with a portable equipment

C. the radio equipment which is easily movable

D. the portable radio with some apparatus

40. If you wear extra clothing when entering the water after abandoning ship it will ______.

A. weigh you down

B. preserve body heat

C. reduce your body heat

D. make it more difficult to breathe

41. The weather is often ______ in a high-pressure area.

A. fine

B. cloudy

C. rainy

D. windy

42. Large vessel leaving. Keep clear ______ approach channel.

A. off

B. reach

C. from

D. of

43. The ship has ______ of more than 10 meters at full load.

A. an engine

B. an overall length

C. a displacement

D. a draft

44. Chief officer,I have ______ things to tell you.

A. a little

B. a few

C. little

D. much

45. I can not ______ you on my radar.

A. locate

B. look for

C. watch

D. look out

46. It is requested that the ship's personnel are ______ the port regulations.

A.to conform to

B.to draw up

C.to comply with

D.to be applicable to

47. I deem ______ unnecessary to do so.

A. it

B. you

C. this

D. that

48. ______ is used for lifting cargo.

A.A mooring winch

B.A windlass

C.A deck crane

D.A life boat engine

49. What's wrong ______ the winch?

A. for

B. with

C. to

D. on

50. What does the abbreviation SWL stand for?

A. signal wave letters

B. ship without light

C. safe water line

D. safe working load

51. Can you ______ survivors?

A. take out

B. pick up

C. stretch out

D. draw out

52. It's ______ that the cargo was damaged by your stevedores.

A. bright

B. distinct

C. plain

D. evident

53. The space in Hatch No.4 tweendeck is too ______.

A. near

B. short

C. close

D. small

54. I have altered course to 245 degrees for ______.

A. identify

B. identifier

C. identity

D. identification

55. The vessel ahead ______ you is stopped.

A. before

B. from

C. of

D. away

56. ______ refers to the angle between true North and the heading line of the ship.

A. True position

B. True meridian

C. True course

D. True bearing

57. From ______ the mariner can understand the data of tide.

A. cargo plan

B. tide table

C. port list

D. notice to mariner

58. Radar is used not only to look ______,but also to measure their distances away from you.

A. at obscured objects

B. forward submerged(淹没的) targets

C. up exposed targets

D. for unseen objects

59. The second officer will take ______ the watch soon.

A. on

B. under

C. off

D. over

60. Ships are always ______ on water and they are easy to rust.

A. float

B. floating

C. floats

D. floated

61. ______ is prohibited in this area.

A. Anchor

B. Anchoring

C. Anchored

D. Being anchored

62. ______ time will the pilot be available?

A. What

B. When

C. HOW

D. At when

63. A vessel fitted with twin screws is easier in ______ than a vessel with single screw.

A. turning maneuver

B. course setting

C. position fixing

D. regulating speed

64. Currents are ______ in rate and direction.

A. vary

B. variable

C. variably

D. variability

65. The pilot disembarked our ship yesterday.

A. came

B. left

C. discharged

D. visited

66. Advise you ______ engines.

A. stop

B. to stop

C. stopping

D. stopped

67. Heights are expressed ______ meters above Mean High Water.

A. in

B. on

C. by

D. with

68. What is your ______ tropical storm warning information?

A. latest

B. lately

C. last

D. nowadays

69. General situation low pressure area is ______ the east China Sea from the mainland.

A. entering

B. entering into

C. going through

D. put in

70. An object is said to be on beam or abeam, if its bearing is approximately ____ from the course being steered.

A. 45 degrees

B. 135 degrees

C. 90 degrees

D. 315 degrees

71. A ship is said to drag if the anchor ______.

A. will hold her in position

B. will prevent the movement of the ship

C. will not move over the bottom

D. will not hold her in position

72. A weather map is a synoptic data because it ______.

A. summarizes a great deal of information

B. can be interpreted accurately

C. appears daily

D. is prepared by the Weather Bureau

73. Logbooks are used to record the events occurring when ______.

A. the ship is in a harbor

B. the ship is at anchorage

C. the ship is underway

D. all of the above

74. A vessel which is restricted in her ability to maneuver under the Rules,is a vessel which is ______.

A. mine-clearing

B. engaged in fishing

C. at anchor

D. not under command

75. We shall change course to starboard and ______ the coming vessel.

A. pass starboard to starboard with

B. pass port to port with

C. overtake

D. none of above

76. Safe speed is defined as that speed where ______.

A. you can stop within your visibility range

B. you can take proper and effective action to avoid collision

C. you are traveling slower than surrounding vessels

D. no wake comes from your vessel

77. While steaming slowly in the harbor,no ship is ______ to exceed the speed limited.

A. assumed

B. appreciated

C. promised

D. permitted

78. In determining a safe speed ______ shall not be among those taken into account.

A. the characteristics,efficiency and limitation of the radar equipment

B. any constraints imposed by the radar range scale in use

C. the effect on radar detection of the sea state,weather and other sources of interference

D. the safe working load of the cranes both on board and ashore

79. When your vessel enters thick fog,she should sound ______ every two minutes in accordance with these Rules.

A.one short blast

B.one prolonged blast

C.two short blasts

D.three short blasts

80. A vessel is in sight of another vessel when ______.

A. she can be observed by radar

B. she can be observed visually from the other vessel

C. she can be plotted on radar well enough to determine her heading

D. her fog signal can be heard

二.中译英(共4题,请将答案写在答题纸上)

81.我船机舱失火。

82.请守听16频道。

83.请从我的右舷通过。

84.我船航向181度,航速12节。

2007年第1期海船船员适任证书全国统考试题(科目:轮机英语) 适用对象:近洋航区750-3000KW及以上船舶二/三管轮作者:不详新闻出处:不详发表时间:2008年9月8日

中华人民共和国海事局

2007年第1期海船船员适任证书全国统考试题(总第42期)

科目:轮机英语试卷代号:806

适用对象:近洋航区750-3000KW及以上船舶二/三管轮

(本试卷卷面总分100分,及格分为70分,考试时间为100分钟)

答题说明:请选择一个最合适的答案,并将该答案按答题卡要求,在其相应位置上用2B 铅笔涂黑。第1题至74题,每题1分,第75题至78题,每题1.5分,第79题至80题, 每题10分。

一、单项选择题

1. Always ensure that the turning gear is______, even at the quay, the

wave from other ships may turn the propeller and thus the engine.

A. disengaged

B. engaged

C. assembled

D. disassembled

2. The main factor which determines the output of each cylinder is _____.

A. the cylinder weight

B. the cylinder bore

C. the cylinder length

D. the cylinder cover

3. The cetane number of a diesel fuel oil indicates its ______.

A. ignition quality

B. acid content

C. heating value

D. viscosity

4. The cylinder oil is pumped into the cylinder (via non-return valves)

when the piston rings pass the lubricating orifices, during ______.

A. the upward stroke

B. the downward stroke

C. the power stroke

D. the suction stroke

5. The lower section of a piston is called the ______.

A. land

B. crown

C.

skirt D. plate

6. Constant cooling the various components of diesel engine has a number

of functions except for ______.

A. good lubrication

B. low thermal stress

C. good mechanical properties

D. acid corrosion

7. A governor automatically controls engine speed by regulating ___ .

A. fuel supply

B. firing order

C. engine

load D. oil level

8. A dirty diesel engine oil filter element can best be detected by

______.

A. visual inspection of the elements

B.the pressure drop across the filter

C.high lube oil sump temperature

D.decrease in oil viscosity from the filter

9. Immediately after any diesel engine is started, the engineer should check the ______.

A. crankcase pressure

B. lube oil pressure

C. saltwater pressure

D. exhaust temperature

10. A controllable pitch propeller on a diesel driven vessel eliminates the need for ______.

A. friction clutches

B. disconnect clutches

C. reversing gears

D. reduction gears

11. In a ______boiler the hot gases from the furnace pass through the tubes while the water is on the outside.

A. water-tube

B. fire-tube

C. exhaust

gas D. Composite

12. The fuel oil supply system to an automatic auxiliary boiler, will automatically shutdown if the boiler ______.

A. steam demand is high

B. salinity is high

C. safety valve simmers(爆发)

D. burner flame is extinguished

13. The maximum pressure developed by a waste heat boiler is determined by the main engine exhaust ______.

A. gas composition

B. gas temperature

C.

pressure D. timing

14. ______continuously extract the crankcase atmosphere, via a pipe system, and move it past a sensitive and accurate opacity(不透明性) measuring track.

A. The oil mist detectors

B. The smoke detectors

C. An oily water monitor

D. Oil discharge monitoring and controlling system

15. If the feed pump for an auxiliary boiler fails to deliver the feed water to the boiler, the cause may be ______.

A. high steam pressure in the boiler

B. abnormally high feed-water temperature

C. abnormally high boiler water temperature

D. steam demand exceeding feed pump capacity

16. The discharge flow of a reciprocating pump is ______.

A. steady

B. in pulsation

C. continuous

D. large

17. A spur gear pump should be operated with the discharge valves ______.

A. slightly opened

B. throttled

C. fully opened

D. halfway opened

18. The pressure of a liquid leaving the pump can be referred to as the

______.

A. total head

B. discharge head

C. net positive suction head

D. suction head

19. An increase in rotor clearances in a rotary pump will ______.

A. increase discharge pressure

B. decrease pump capacity

C. decrease pump cavitation

D. decrease reaction ring clearance

20. If a centrifugal pump is driven by a constant speed electric motor and produces a discharge pressure less than designed, the cause is probably ______.

A. excessive pump speed

B. excessive suction head

C. worn wearing rings

D. gross pump misalignment

21. The heat identified by only a change in temperature is known as ______.

A. sensible heat

B. latent heat

C. total heat

D. residual heat

22. The effective temperature of air is dependent upon ______.

I. relative humidity II. air velocity

A. I only

B. II only

C. Both I and II

D. Neither I nor II

23. In a chilled(冷的) water air conditioning unit using a reciprocating compressor, the refrigerating effect of the primary refrigerant can be increased by ______.

A. increasing refrigerant pressure in the coil

B. increasing chilled water flow through the cooler

C. sub-cooling the refrigerant in the condenser

D. superheating the refrigerant in the compressor

24. Sludge may be formed in the oil in the crankcase of a reciprocating air conditioning compressor as a result of ______.

A. refrigerant bubbles in the lube oil

B. refrigerant reducing the lube oil viscosity

C. oxidation(氧化) of the lube oil from overheating

D. reducing the floc or cloud point of the oil

25. A high rate of separation between oil and water is favored by ______.

A. large size of oil globule(小球)

B. low temperature

C. high viscosity

D. high flow rate

26. When started, a complete oily water separating unit is first filled

______. The oily water mixture is then pumped through the inlet pipe into the coarse separating compartment.

A. with dirty water

B. with clean water

C. by oily water

D. by mixed water

27. Which is the pollution prevention equipment?

A. booster pump

B. evaporator

C.

incinerator D. cooler

28. The oil sludge is burnt in the ______onboard. I’ll show you the ashes.

A. boiler

B. main engine

C. auxiliary

engine D. incinerator

29. Most marine biological sewage treatment plants consist of all the

following statements except ______.

A. aeration(通风) tanks

B. settling tanks

C. disinfection agent(消毒剂)

D. anaerobic bacteria(厌氧菌)

30. Dirty oil must be ______before being used again .

A. mixed with clean oil

B. purified

C.

heated D. strained

31. Cylinders of marine diesel engines are normally cooled by ___ .

A. sea water

B. fine mineral oil

C. sanitary

water D. fresh water

32. In a flash type evaporator, all saltwater heaters are vented through individual vent cocks to the ______.

A. saltwater heater shell

B. second-stage condenser

C. atmosphere

D. second-stage flash chamber

33. When a vacuum boiling evaporator works, the hot jacket water will pass over the tube stack and ___ the sea water passing through the tubes.

A. dispose

B. dissolve

C.

heat D. dissipates

34. What type of valve is used to direct the flow of hydraulic fluid?

A. relief valve

B. direction control valve

C. stop valve

D. pressure control valve

35. Among the basic categories of equipment, which of the following is used to convert hydraulic energy into continuous rotary motion?

A. hydraulic pumps

B. valves

C. hydraulic cylinders

D. hydraulic motors

36. In a ordinary cargo crane, ______is fitted to rotate the crane.

A. the slewing motor

B. the luffing motor

C. the hoisting motor

D. the fan motor

37. If an anchor windlass has been idle for some time, you should ______.

A. repack all valve stems

B. lubricate it prior to use

C. replace the foundation bolts

D. balance the warping heads

38. Mooring winch should be equipped with mechanical brakes capable of holding ______.

A. half the breaking strength of the mooring line

B. the full breaking strength of the mooring line

C. the maximum expected tension of the mooring line

D. 50% over the working tension of the mooring line

39. The pour point of lubricating oils is affected the most by which of the following?

A. Extensive centrifuging

B. Wax content

C. Water content

D. Acid content

40. The number of cycles per second occurring in AC voltage is known as the ______.

A. phase angle

B. frequency

C. wave form

D. half mode

41. What will be the phase angle relationship of a six-pole, three-phase,

rotating field generator?

A. 60

B. 120

C. 180

D. 360

42. It ______ for an emergency generator to require paralleling.

A. is not usual

B. is usual

C. is necessary

D. is not impossible

43. Equal power factors on paralleled AC generators are maintained by an automatic ________.

A. governor control switch

B. reverse power relay

C. reverse current relay

D. voltage regulator

44. Electric insulation is made of organic substances and so gradually

______with age.

A.deteriorates(恶化)

B.increases

C.are fouled

D.becomes better

45. The main generators are connected to ______.

A. distribution boards

B. section boards

C. emergency switch boards

D. main switch boards

46. The part of the shipboard electrical system used to control the distribution of power to the branch circuits, is the ______.

A. bridge control panel

B. disconnect links

C. main switchboard

D. governor relay box

47. The primary function of an electric motor is to ______.

A. develop torque

B. generate high voltages

C. produce a magnetic field

D. generate high electrical resistance

48. Electrical circuits are protected against overheating by means of a/an _______.

A. circuit breaker

B. amplifier

C. diode (二极管)

D. capacitor

49. A circuit breaker and a fuse have a basic similarity(类似) in that they both ______.

A. can be reset to energize the circuit

B. should open the circuit when overloaded

C. will burn out when an over current flow develops

D. should short the circuit when overloaded

50. Current measuring instruments must always be connected in ______.

A. series with a circuit

B. parallel with a circuit

C. series-parallel with a circuit

D. delta with the shunt

51. Prior to any overhaul work on electric equipment, it is important to ensure the circuits are ___ .

A. live

B. dead

C. excited

D. on line

52. The order“______” means “Maximum maneuvering engine revolution for ahead propulsion.”

A. Full Ahead

B. Half Ahead

C. Full Astern

D. Half Astern

53. ______is a precaution which contributes to avoiding trouble under normal

operating conditions.

A. Constant inspection

B. Keeping constant load

C. Remaining constant temperature

D. Varying speed

54. After the order '______' is given, the air system is shut down, the turning gear put in.

A. Finished With Engine

B. Stop The Engine

C. Stand-by Engine

D. Slow-down Engine

55. Keep compartment ______ as the gas given off can be dangerous.

A. in good order

B. well clean

C. well ventilated

D. more room

56. A fire involving trash and paper waste would be classified as a ______.

A. class A

B. class B

C. class C

D. class

D

57. Which of the following is least likely to cause the ignition of fuel vapors?

A.Static electricity

B.An open running electric motor

C. Loose wiring

D. Explosion proof lights

58. Which of the following components provides a direct source of seawater for the fire main system?

A. Rose box

B. Sea chest

C. Sluice(闸式) valve

D. Fire pump stuffing box

59. CO2 extinguishes a fire by __________.

A. a blanket of bubbles formed on the surface of the fire

B. smothering

C.isolating the heat from the fuel

D. cooling

60. Obviously, for a given fuel oil, its pour point is ______its cloud point.

A. lower than

B. higher than

C. as same as

D. better than

61. Using a file without a handle may result in ______.

A. your work becoming rounded

B. injury to your hand

C. overheating of the file

D. pinning

62. When a vessel is in dry-dock, the vessel's engineers should ______.

A. examine the condition of the propeller

B. chip and paint all hull protection zincs

C. install new docking plugs in all cofferdams

D. inspect the hull for hogging or sagging

63. The additional mark ______in the Classification Certificate for Machinery represents the propulsion apparatus is remotely controlled on the navigating bridge control station, and engine room is watched by duty personnel.

A. BRC

B. MCC

C. AUT-0

D. AUT-1

64. Oil Record Book Part I shall be provided to every oil tanker of 150 tons gross tonnage and above and every ship of 400 tons gross tonnage and above,

______oil tankers, to record relevant machinery space operations.

A. as well as

B. as long as

C. rather than

D. other than

65. The Port Authorities, in accordance with the IMO resolutions have been carrying out _____ to enhance safety of ships.

A. CPP

B. FPP

C. FSC

D. PSC

66. The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the ______.

A. Navigation Log Book

B. Engine Room Log Book

C. Oil Record Book

D. Muster List

67. When deciding the composition of the engineering watch, which may include _____appropriately, many factors shall be taken into account.

A.satisfied engineers B.qualified ratings

C.satisfied chief engineer D.qualified chief engineer

68. _____ should not undertake any task which will interfere with the supervision duties relating to the main machinery and associated equipment. A. The watch keeping personnel B. The chief engineer

C. The person on a bunker barge

D. The duty deck officer

69. The officer in charge of the engineering watch shall ensure that at all times bridge orders relating to changes in ______of operation are immediately implemented(执行).

A. ahead or astern

B. fore or aft

C. up or down

D. speed or direction

70. In cleaning up an oil spill, the use of chemical agents would ______.

A. absorb the oil for easy removal

B. remove the oil from the water

C. disperse or dissolve the oil in the water

D. not affect the oil

71. One of the methods NOT usually allowed in cleaning up oil spills in the United States is ______.

A. skimmers

B. straw

C.

dispersants D. sawdust

72. The SOLAS Convention in its successive forms is generally regarded as the most important of all international treaties concerning the ______of merchant ships.

A. pollution

B. economization(节省)

C.

safety D. efficiency

73. ______ means the Government of the State whose flag the ship is entitled to fly.

A. Assembly

B. Organization

C.

Company D. Administration

74. The ship security officer shall have knowledge and have received training, taking into account the guidance given in Part B of______.

A.the ISM Code

B.the ISPS Code

C.the IBC Code

D.the IGC Code

二、关联题(关联题题干下有4个小题,每小题4个选项)

Due to the large amount of heat picked up by the air in boiler and engine rooms, it would be impracticable to maintain ambient conditions within the comfort zone by air conditioning or any other means. The normal practice is to provide copious mechanical ventilation; in boiler rooms, the quantity is equated to the combustion requirements, while in a motor ship engine room the supply may be 25-50% in excess of the requirements of the engines.

The axial flow fan is particularly suited to handle these large air volumes at the moderate pressures required, while of course the “straight-through” flow feature places it at an advantage over the centrifugal fan.

The increasing adoption of automation, with the provision of a separate control room makes less significant the fact that comfort conditions cannot be maintained in the engine room all the time.

75. Which of the following devices should be taken to maintain ambient conditions of the boiler and machinery space?

A. air compressor

B. air cooler

C. air-conditioning plant

D. mechanical ventilation plant

76. In a motor vessel, the air quantity which the engine room need is_______ of the requirements of the engines.

A. less than 25-50%

B. more than 125-150%

C. more than 25-50%

D. less than 125-150%

77. At the middle pressure and large air quantity,_________ is more suitable.

A. an axial flow fan

B. a radial flow blower

C. a centrifugal fan

D. an auxiliary blower

78. According to this passage, which of the following statements is true?

A. In boiler and machinery spaces, there is the air conditioning.

B. In the boiler rooms the requirement of air volume should meet 25-50% of combustion

requirement.

C.To maintain the comfort zone in the separate control room the air conditioning plant should be

fitted.

D. The comfort conditions can be maintained in the engine room all the time.

三、中译英(共2题,请将答案写在答题纸上)

79、(轮机日志)22时30分,废气锅炉上、下排污,23时,废气锅炉用化学药剂吹灰。

80、(修理单)NO.2重油分油机解体检修,所有密封O形圈、轴承换新。

期数:42 试卷代号:806

(完整版)2017年高考全国卷1地理试题(含答案解析)高清Word版(2)

2017年普通高等学校招生全国统一考试 文科综合能力测试 (全国卷Ⅰ) 本试卷分第Ⅰ卷(选择题)和第Ⅱ卷(非选择题)两部分,共15页。满分300分。考试用时150分钟。考试结束后,将本试卷和答题卡一并交回。 注意事项: 1.答题前,考生务必用0.5毫米黑色签字笔将自己的姓名、座号、考生号、县区和科类填写到答题卡和试卷规定的位置上。 2.第Ⅰ卷每小题选出答案后,用2B铅笔把答题卡上对应题目的答案标号涂黑;如需改动,用橡皮擦干净后,再选涂其他答案标号。写在本试卷上无效。 3. 第Ⅱ卷必须用0.5毫米黑色签字笔作答,答案必须写在答题卡各题目指定区域内相应的位置;如需改动,先划掉原来的答案,然后再写上新的答案;不能使用涂改液、胶带纸、修正带。不按以上要求作答的答案无效。 第Ⅰ卷 一、选择题:本卷共35小题,每小题4分,共140分。在每小题给出的四个选项中,只有一项是符合题目要求的。 图1为我国东部地区某城市街道机动车道与两侧非机动车道绿化隔离带的景观对比照片,拍摄于2017年3月25日。数年前,两侧的绿化隔离带按同一标准栽种了常绿灌木;而如今,一侧灌木修剪齐整(左图),另一侧则杂树丛生,灌木零乱(右图)。拍摄当日,这些杂树隐有绿色,新叶呼之欲出。据此完成1~3题。 图1 1.当地的自然植被属于 A.常绿阔叶林

B.落叶阔叶林 C.常绿硬叶林 D.针叶林 2.造成图示绿化隔离带景观差异的原因可能是该街道两侧 A.用地类型差异 B.居民爱好差异 C.景观规划不同 D.行政管辖不同 3.图示常绿灌木成为我国很多城市的景观植物,制约其栽种范围的主要自然因素是 A.气温 B.降水 C.光照 D.土壤 德国海德堡某印刷机公司创始人及其合作者设计了轮转式印刷机,开创了现代印刷业的先河。至1930年,海德堡已成立了6家大的印刷机公司。同时,造纸、油墨和制版企业也先后在海德堡集聚。产业集聚、挑剔的国内客户以及人力成本高等因素的综合作用,不断刺激海德堡印刷机技术革新。据此完成4~5题。 4.造纸、油墨和制版企业在海德堡集聚,可以节省 A.市场营销成本 B.原料成本 C.劳动力成本 D.设备成本 5.海德堡印刷机在国际市场长期保持竞争优势,主要依赖于 A.产量大 B.价格低 C.款式新 D.质量优 图2示意我国西北某闭合流域的剖面。该流域气候较干,年均降水量仅为210毫米,但湖面年蒸发量可达2000毫米。湖水浅,盐度饱和,水下已形成较厚盐层。据此完成6~8题。

《环境工程学》试卷、习题集及答案(三篇)

《环境工程学》试卷 一、名词解释(每小题2分,共20分) 1.COD;2. 厌氧生物处理法;3. 泥龄;4. 好氧硝化;5. A/A/O法; 6. 反电晕; 7. 二次扬尘; 8. 电场荷电; 9. FGD;10. SCR法。 二、选择题(每小题2分,共20分) 1.BOD是化学性水质指标之一,其含义是()。 A 溶解氧; B 化学需氧量; C 生化需氧量。 2.废水处理方法很多,其中混凝沉淀法可去除废水中的()。 A 可生物降解有机物; B 不溶性有机物; C悬浮物质。 3.废水二级处理技术属于()。 A 生物方法; B 化学方法; C物理方法。 4.A2/O法产生的污泥量比活性污泥法()。 A 多; B 少; C 一样。 5.下列哪种技术属于废水三级处理技术() A 臭氧氧化; B 气浮; C 好氧悬浮处理技术。 6.脱硫技术很多,跳汰选煤脱硫技术属于()。 A 炉前脱硫技术; B 炉内脱硫技术; C 炉后脱硫技术。 7.电除尘器最适宜捕集的粉尘是()。 A 低比电阻粉尘; B 中比电阻粉尘; C 高比电阻粉尘。 8.常被用来作为高效除尘器的前级预除尘器的是()。 A 机械力除尘器; B 电除尘器; C 过滤式除尘器。 9.既能捕集颗粒污染物,又能脱除部分气态污染物的除尘器是()。 A 机械力除尘器; B 电除尘器; C 湿式除尘器。 10.SCR法烟气脱硝的主要机理是()。 A 催化转化; B 化学吸收; C 化学吸附。 三、填空题(每题2分,共10分) 1.MLSS,MLVSS,SVI,SBR分别为、、、。 2.活性污泥法有效运行的基本条件为、、、。 3.SCR法烟气脱硝机理分为、、、。 4.影响湿法脱硫效率的主要因素包括:、、、。 5.控制颗粒污染物的主要方法包括:、、、。 四、简答题(每小题3分,共30分) 1.什么是废水的一级处理,二级处理和深度处理

环境工程学课后答案

环境工程学(第二版)课后答案绪论环境工程学的发展和内容 第一章水质与水体自净 第二章水的物理化学处理方法 第三章水的生物化学处理方法 第五章大气质量与大气污染 第六章颗粒污染物控制 第七章气态污染物控制 第八章污染物的稀释法控制 绪论环境工程学的发展和内容 0-1名词解释: 环境:影响人类生存和发展的各种天然的和经过人工改造的自然因素的总体,包括大气、水、海洋、土地、矿藏、森林、草地、野生生物、自然遗迹、人文遗迹、自然保护区、风景名胜区、城市和乡村等。 环境问题:全球环境或区域环境中出现的不利于人类生存和发展的现象,均概括为环境问题。 环境污染:由于自然或人为(生产、生活)原因,往原先处于正常状况的环境中附加了物质、能量或生物体,

其数量或强度超过了环境的自净能力,使环境质量变差,并对人或其它生物的健康或环境中某些有价值物质产生了有害影响的现象。 污染物质:引起环境污染的物质即为污染物质。 公害:由人为原因引起化学污染物滋事而产生的突发事件通常称为公害。 环境科学:研究人类环境质量及其保护的和改善的科学,其主要任务是研究在人类活动的影响下环境质量的变化规律和环境变化对人类生存的影响,以及改善环境质量的理论、技术和方法。 0-2 试分析人类与环境的关系。 “环境”一词是相对于人类而言的,即指的是人类的环境。人类与其环境之间是一个有着相互作用、相互影响、相互依存关系的对立统一体。人类从周围环境中获得赖以生存、发展的空间和条件,同时其生产和生活活动作用于环境,又会对环境产生影响,引起环境质量的变化;反过来,污染了的或受损害的环境也对人类的身心健康和经济发展等造成不利影响。 0-3试讨论我国的环境和污染问题 0-4什么是环境工程学?他与其他学科之间的关系怎样? 环境工程学应用环境科学、工程学和其它有关学科的理论和方法,研究保护和合理利用自然资源,控制和防治环境污染和生态破坏,以改善环境质量,使人们得以健康、舒适地生存与发展的学科。 环境工程学是环境科学的一个分支,又是工程学的一个重要组成部分。它脱胎于土木工程、卫生工程、化学工程。机械工程等母系学科,又融入了其他自然科学和社会科学的有关原理和方法。

(完整版)2017年地理高考真题全国卷一

2017年普通高等学校招生全国统一考试(全国Ⅰ卷) 图1为我国东部地区某城市街道机动车道与两侧非机动车道绿化隔离带的景观对比照片,拍摄于2017年3月25日。数年前,两侧的绿化隔离带按同一标准栽种了常绿灌木;而如今,一侧灌木修剪齐整(左图),另一侧则杂树丛生,灌木零乱(右图)。拍摄当日,这些杂树隐有绿色,新叶呼之欲出。据此完成1~3题。 1.当地的自然植被属于 A.常绿阔叶林B.落叶阔叶林C.常绿硬叶林D.针叶林 2.造成图示绿化隔离带景观差异的原因可能是该街道两侧 A.用地类型差异B.居民爱好差异C.景观规划不同D.行政管辖不3.图示常绿灌木成为我国很多城市的景观植物,制约其栽种范围的主要自然因素是A.气温B.降水C.光照D.土壤

德国海德堡某印刷机公司创始人及其合作者设计了轮转式印刷机,开创了现代印刷业的先河。至1930年,海德堡已成立了6家大的印刷机公司。同时,造纸、油墨和制版企业也先后在海德堡集聚。产业集聚、挑剔的国内客户以及人力成本高等因素的综合作用,不断刺激海德堡印刷机技术革新。据此完成4~5题。 4.造纸、油墨和制版企业先后在海德堡集聚,可以节省 A.市场营销成本 B.原料成本 C.劳动力成本 D.设备成本 5.海德堡印刷机在国际市场长期保持竞争优势,主要依赖于A.产量大B.价格低 C.款式新D.质量优

图2示意我国西北某闭合流域的剖面。该流域气候较干,年均降水量仅为210毫米,但湖面年蒸发量可达2 000毫米,湖水浅,盐度饱和,水下已形成较厚盐层。据此完成6~8 6.盐湖面积多年稳定,表明该流域的多年平均实际蒸发量 A.远大于2 000毫米B.约为2 000毫米 C.约为210毫米D.远小于210毫米 7.流域不同部位实际蒸发量差异显著,实际蒸发量最小的是 A.坡面B.洪积扇C.河谷D.湖盆8.如果该流域大量种植耐旱植物,可能会导致 A.湖盆蒸发量增多B.盐湖面积缩小 C.湖水富养化加重D.湖水盐度增大

2019年全国三卷高考地理试题(试卷版+详解版)

2019年全国卷Ⅲ地理试题版 解析版

2019年高考全国卷Ⅲ地理试题 我国人口众多,生活垃圾产生量巨大,迫切需要对垃圾进行无害化、资源化处理。近些年,某企业开发了厨余垃圾自动处理系统,并在全国很多城市推广。图1示意该厨余垃圾自动处理系统的主要工艺流程。据此完成1~2题。 1.厨余垃圾是图示自动处理系统中的 A.肥料B.原料 C.能源 D.产品 2.符合图示自动处理系统局部工艺流程的是 A.废渣→生产沼气→沼气发电B.工业油脂→提取生物油脂→有机渣 C.有机渣→生产沼气→废渣D.生产沼气→有机渣→提取生物油脂 稻谷是重要的粮食种类,粮食的充分供给和区域平衡是保障粮食安全的重要任务。图2反映2014年我国不同省份的稻谷供需关系。据此完成3~5题。

3.已不再成为我国主要稻谷余粮区的是 A.黄河下游区B.长江中游区C.珠江下游区D.淮河下游区 4.与安徽省相比,黑龙江省稻谷供需盈余的主要条件是 A.人均耕地多B.农业劳动力多 C.复种指数高D.淡水资源丰富 5.我国水稻种植重心北移会导致稻谷 A.出口数量扩大B.运输成本上升 C.流通效率提高 D.储存难度增加 近年来,位于高纬的西伯利亚地区气候发生了明显变化,土地覆被也随之变化,平地上的耕地明显减少,洼地上的草地大量转化为湿地,越年积雪(积雪期超过一年)面积减少。据此完成6~8题。 6.导致西伯利亚地区土地覆被变化的首要原因是 A.气温升高B.气温降低 C.降水增多 D.降水减少 7.湿地面积增加主要是因为当地 A.洪水暴涨B.退耕还湿 C.地面沉降 D.冻土融化 8.西伯利亚地区平地上减少的耕地主要转化为

2019全国1卷地理试题

2019高考全国1卷 20世纪80年代开始,长江三角洲地区某县村办企业涌现,形成“村村冒烟”现象。2016年该县开始实施村集体经济“抱团飞地”发展模式:由县、镇统筹,整合腾退的村办企业建设用地指标和补贴资金,各村以股份合作形式(抱团)在发展条件优越的城镇(飞地)联合建设创新创业中心,并建立保证各村收益的机制。据此完成下面小题。 1.“村村冒烟”主要指的是当时该县村办企业 A.燃料来源分散B.空间布局分散 C.原料来源分散D.产品市场分散 2.实施“抱团飞地”发展模式,可以 ①弥补劳动力不足②缓解建设用地紧张③提升基础教育水平④壮大集体经济实力 A.①③B.②③C.①④D.②④ 3.“抱团飞地”发展模式,主要体现了 A.城乡统筹创新B.生活方式创新 C.农业发展创新D.科学技术创新 1.B由材料可知,20世纪80年代,长三角地区村办企业涌现说明当时村办企业较多,但都是基于“一村一地”的形式,虽然村村都能够实现发展。但是相对来说空间布局较分散,不够集中,因此出现了村村冒烟的现象,且改革开放初期的村办企业多是随着世界产业转移而承接的劳动密集型产业,对于原料燃料需求较小,B对,A、C错误。村办企业属于生产企业,市场是否分散与“村村冒烟”无关。D选项错误。故选B。 2.D由材料可知,抱团飞地包括两部分:抱团是指各村进行入股合作,而飞地指的是相对发达地区,也就是条件优越的城镇区域。材料中提到,由县、镇统筹整合,腾退的村办企业建设用地指标、补贴资金,也就是说,乡镇提供符合指标的村办企业建设用地,而资金补贴则是由相对发达的城镇地区进行提供,双向互惠,壮大了集体经济规模,实现了共赢,推进发达地区和欠发达区域的协同发展,有效地提高了资金和土地资源的利用效率,解决原先资金以及建设用地资源不足的问题。②④正确,抱团飞地模式原先并没有出现劳动力不足的问题,也并没有弥补劳动力短缺。抱团飞地主要是针对原先集体经济资金、资源发展总量少的问题,跟教育无关。①③错误。故选D。 3.A该县的抱团飞地发展模式,是由县镇统筹,整合腾退,村办企业建设用地指标和补贴资金,这样主要体现了城乡统筹的创新,A对。这种模式没有加大科技投入,并未体现科学技术的创新,D错。生活方式的创新是受文化影响的,与当地企业发展模式无关,B错。该地的抱团飞的发展模式是对村办企业,属于工业生产,对农业发展创新没有影响,C错。故选A。 下图示意2015年欧盟境内欧盟籍和非欧盟籍的人口结构。据此完成下面小题。

环境工程微生物学试题

《环境工程微生物学》课程综合复习资料 一、填空题 1、我国大耜提出的六界分类系统为:、、、、、。 2、病毒的分类依据有多种,按照核酸分类,病毒可分为、。 3、细菌的原生质体包括,和三大部分。 4、根据古菌的生活习性和生理特性,古菌可分为、、三大类型。 5、在《伯杰氏系统细菌学手册》中,将古菌分为五大类群:、、、、。 6、放线菌的革兰氏染色反应:除为外,其余均为。 7、在废水生物处理中起重要作用的三种原生动物包括,和。作为指示生物,指示处理效果差的是和。 8、真菌中的、和在有机废水和有机固体废物的生物处理中都起着积极作用。 9、从化学组成来看,酶可分为和两类。 10、、、、四种元素是所有生物体的有机元素。 11、微生物最好的碳源是,尤其是、,它们最易被微生物吸收和利用。 12、环境工程微生物学中,根据形态特点,细菌可分为四种形态,即、、、。 13、按培养基组成物的性质不同,可把培养基分为、、。 14、好氧活性污泥的组成中,微生物成分主要是。 15、菌种复壮法有、、三种。 16、污水生物处理法很多,根据微生物与氧的关系分为和两类。 17、原生动物可划分为四个纲,即、、和。 18、在污废水生物处理中,原生动物和微型后生动物的作用体现在:、和。 19、现在普遍接受的五界分类系统为:、、、、。 20、部分细菌有特殊结构:、、、、和。 21、20世纪70年代开始在水平上研究生物的研究生物的进化和系统发育。沃斯以的相关性,将一类有别于细菌的、在特殊环境的单独列出,与细菌和真核生物并列于系统发育树中。 22、细胞质膜的化学组成包括、、。 23、微生物学家根据rRNA序列的不同,将所有细胞生物分为三大域,即、、。 24、根据专性宿主分类,病毒可分为、、、、、。

近年高考全国卷地理试题

2011年普通高等学校招生全国统一考试日本某汽车公司在中国建有多个整车生产厂和零部件生产厂。2011年3月11日东日本大地震及随后的海啸、核辐射灾害,使该公司在灾区的土厂停产。受其影响,该公司在中国的整车生产厂也被迫减产。据此完成1~2题。 1.该公司在中国建零部件生产厂,主要目的是 A.避免自然灾害对本土汽车生产的影响 B.为其中国整车厂配套,降低整车生产成本 C.利用中国廉价劳动力,为其日本整车厂服务 D.建立其全球整车生产的零部件供应基地 2.中国整车生产厂被迫减产是由于该公司在灾区有 A.研发中心 B.一般零部件厂 C.核心零部件厂 D.整车厂 第二次世界大战以后,美国通过大量技术投入和大规模专业化生产,成为世界最大的大豆生产国和出口国。巴西自20世纪70年代开始种植大豆,在积极培育优良品种的同时,鼓励农民组建农场联合体,实现了大豆的规模化生产与经营。目前,巴西的大豆产量、出口量仅次于美国。中国曾是世界最大的大豆生产国和出口国,近些年大豆的质量下降(品种退化,出油率低),生产成本较高,成为世界最大的大豆进口国。据此完成3~5题。 3.巴西大豆总产量增加的潜力大于美国,主要是因为巴西 A.技术力量较雄厚 B.气候条件较优越 C.可开垦的土地资源较丰富 D.劳动力较充足 4.在国际市场上,巴西大豆价格低于美国的主要原因是巴西 A.专业化水平较高 B.科技投入较大 C.劳动生产率较高 D.劳动力价格较低5.中国要提高大豆质量亟需 A.加大科技投入 B.扩大种植面积 C.增加劳动力投入 D.加大化肥使用量 读图1,完成6~8题。

6.图示区域内最大高差可能为 A.50m B.55m C.60m D.65m 7.图中①②③④附近河水流速最快的是 A.① B.② C.③ D.④ 8.在图示区域内拟建一座小型水库,设计坝高约13 m。若仅考虑地形因素,最适宜建坝处的坝顶长度约 A.15m B.40m C.90m D.65m 图2显示青藏铁路从拉萨向北上坡段某处的景观。其中T是为保护铁路而建的工程设施。据此完成9~ll题。 9.据图文信息可以推断 A.该段铁路沿等高线布线 B.该段河流冬季结冰 C.铁路沿P箭头指示向拉萨延伸 D.P箭头指示北方 lO.M、N间的堆积物来源于 A.坡 B.河流 C.沟 D.原地 11.T设施的主要作用是 A.防御坡部位崩塌对铁路的危害 B.防御沟部位洪水及泥沙对铁路的危害 C.防御河流洪水对铁路的危害 D.方便野生动物穿越铁路线 第Ⅱ卷

2020年全国卷1文科综合地理试题及解析

2020年全国卷1文科综合地理试题及解析四川省南充市白塔中学陈禄春 治沟造地是陕西省延安市对黄土高原的丘陵沟壑区,在传统打坝淤地的基础上,集耕地营造、坝系修复、生态建设和新农村发展为一体的“田水路林村”综合整治模式,实现了乡村生产、生活、生态协调发展(图1)。据此完成1~3题。 1.与传统的打坝淤地工程相比,治沟造地更加关注() A.增加耕地面积B.防治水土流失 C.改善人居环境D.提高作物产量 解析考查读图分析能力。与与传统的打坝淤地工程相比,由图可知:治沟造地更加关注生活宜居适度(复垦空废宅基地、易地移民搬迁、健全公共服务)。传统的打坝淤地主要关注生态、生产。所以选C。2.治沟造地对当地生产条件的改善主要体现在() A.优化农业结构B.方便田间耕作 C.健全公共服务D.提高耕地肥力

解析考查读图分析能力。由图可知:生产集约高效包括调整农业结构、支渠排水灌溉、沟渠覆图造地,所以使土地平整。灌溉分布,方便田间耕作,所以选B。 3.推测开展治沟造地的地方( ) ①居住用地紧张②生态环境脆弱 ③坡耕地比例大④农业生产精耕细作 A.①③B.①④C.②③D.②④ 解析考查农业生产措施的形成原因。由图可知:开展治沟造地,首先是改善生态环境,而黄土高原的生态环境问题主要是水土流失,而水土流失的自然原因是降水强度大,地表起伏较大,土壤疏松、植被较少。所以开展治沟造地的地方:生态环境脆弱,坡耕地比例大。选C。 为获得冬季防风、夏季通风的效果,我国东北平原的某城市对一居住区进行了相应的建筑布局规划,规划建筑物为高层(7层以上)和多层(7层或以下)。图2示意在该居住区内规划的两个居住片区、道路、出入口及当地盛行风向。据此完成4~6题。

最新环境工程学试卷(A)-(4)

山东轻工业学院 10/11学年第一学期《 环境工程学》期末考试试卷 (A 卷) (本试卷共9页) 一、选择题(本题满分25分) 1. Monod 公式说法错误的是: A. 米-门公式是在前人工作的基础上,采用纯酶进行动力学试验,并根据中间产物学说提出的关于底物浓度与酶促反应之间的关系式。 B. 在废水生物处理工程中,米-门公式是常用的一个反应动力学公式,在具体应用中要采用微生物浓度代替酶浓度。 C. Monod 公式是在米-门公式的基础上提出的,它反映了微生物增长速度和微生物本身的浓度、底物浓度之间的关系。 D. 米-门公式和Monod 公式中的饱和常数含义不同。 2.城市污水处理厂,平流式沉砂池的设计最小流速应为( )m /s 。 A. 0.15 B. 0.3 C. 0.6 D. 1.0 3.城市污水处理厂,沉砂池砂斗容积不应大于( )d 的沉砂量。 A. 2 B. 3 C. 4 D. 5 4.城市污水处理厂,沉淀池的有效水深宜采用( )m 。 A. 1~2 B. 2~4 C. 4~5 D. 5~6 5.沉淀池出水堰最大负荷,二次沉淀池不宜大于( )L /(s·m)。 A. 0. 5 B. 1. 0 C. 1. 7 D. 2. 9 6.生物滤池的布水设备应使污水能( )在整个滤池表面上。布水设备可采用活动布水器,也可采用固定布水器。

A. 集中分布 B. 不集中分布 C. 不均匀分布 D. 均匀分布 7.低负荷生物滤池的设计当采用碎石类填料时,应符合下列要求:当采用固定喷嘴布水时的喷水周期宜为( )min。 A. 1~3 B. 3~5 C. 5~8 D. 8~10 8.塔式生物滤池的设计,应符合下列要求。填料应采用塑料制品,滤层总厚度应由试验或参照相似污水的实际运行资料确定,一般宜为( )m。 A. 2~4 B. 4~6 C. 6~8 D. 8~12 9.曝气池的布置,应根据普通曝气、阶段曝气、吸附再生曝气和完全混合曝气各自的工艺要求设计,并宜能调整为按( )运行。 A. 两种或两种以上方式 B. 两种方式 C. 一种方式 D. 两种以上方式 10.( )一般宜采取在曝气池始端1/2~3/4的总长度内设置多个进水口的措施。 A. 普通曝气池 B. 吸附再生曝气池 C. 完全混合曝气池 D. 阶段曝气池 11.( )的吸附区和再生区可在一个池子内时,沿曝气池长度方向应设置多个出水口;进水口的位置应适应吸附区和再生区不同容积比例的需要;进水口的尺寸应按通过全部流量计算。 A. 普通曝气池 B. 吸附再生曝气池 C. 完全混合曝气池 D. 阶段曝气池 12.完全混合曝气池可分为合建式和分建式。合建式曝气池的设计,应符合下列要求。( )的表面水力负荷宜为0. 5~1. 0m3/(m2·h) 。 A. 曝气区 B. 沉淀区 C. 导流区 D. 出水区 13. 氧化沟宜用于要求出水水质较高或有脱氮要求的中小型污水厂,设计应符合下列要求。氧化沟前可不设( )。 A. 沉砂池 B. 初次沉淀池 C. 粗格栅 D. 细格栅 14. 采用( )叶轮供氧时,应符合下列要求。叶轮的线速度采用3.5~5m/s。曝气池宜有调节叶轮速度或池内水深的控制设备。

环境工程学》复习题

《环境工程学》复习题 一、名词解释 1. BOD : 2. COD : 3. 泥龄: 4. 好氧硝化: 5. 反硝化: 二、简答题 1. 简答:什么是污泥龄,为什么说可以通过控制排泥来控制活性法污水处理厂的运行 2. 简述生物滤池构造上分为哪几部分对滤料有何要求 3. 试述厌氧生物处理法的基本原理怎样提高厌氧生物处理的效能 4. 叙述AO 法的脱氮机理,画出AO 法的工艺流程图。 5. 活性污泥法有效运行的基本条件有哪些 6. 试叙述好氧生物处理与厌氧生物处理的基本区别及各自的适用场合。 三、计算题 1. 一降落的雨滴中,最初没有溶解氧存在。雨滴的饱和溶解氧浓度为9. 20mg/L 。假设在降落2s 后雨滴中已经有3. 20mg/L 的溶解氧。试计算雨滴中的溶解氧浓度达到8. 20mg/L 需要多长时间 2. 一水处理厂在沉淀池后设置快砂滤池,滤池的设计负荷率为32200/()m d m 。试计算在设计流量0. 53/m s 下,滤池表面积为多大若每个滤池表面积限制在552m 以下,共需建多少个滤池 四、综合题

1. 在水处理工艺中,水中杂质分离常用下面的物理化学方法,使用最简单的一句话或几个字表示去除水中杂质的原理及影响去除效果的决定因素。 《环境工程学》复习题参考 二、名词解释 :水中有机污染物被好氧微生物分解时所需的氧量。 2. COD : 用化学氧化剂氧化水中有机污染物时所消耗的氧化剂量。 3. 泥龄: 即微生物平均停留时间,是指反应系统内的微生物全部更新一次所需要的时间,工程上是指反应系统内微生物总量与每日排出的剩余微生物量的比值。 4. 好氧硝化: 在好氧条件下,将+4NH 转化成2NO -和3NO -的过程。 5. 反硝化: 在无氧条件下,反硝化菌将硝酸盐氮和亚硝酸盐氮还原为氮气的过程。 二、简答题 1. 简答:什么是污泥龄,为什么说可以通过控制排泥来控制活性法污水处理厂的运行 微生物代谢有机物的同时自身得到增殖,剩余污泥排放量等于新增污泥量,用新增污泥量替换原有系统中所有污泥所需要的时间称为泥龄,如果排放的剩余污泥量少,使系统的泥龄过长,会造成系统去除单位有机物的氧消耗量增加,即能耗升高,二沉池出水的悬浮物含量升高,出水水质变差,如果过量排放剩余污泥,使系统的泥龄过短,活性污泥吸附的有机物后来不及氧化,二沉池出水中有机物含量增大,活性污泥吸附的有机物后来不及氧化,二沉池出水中有机物含量增大,出水的水质也会变差。如果使泥龄小于临界值,即从系统中排出的污泥量大于其增殖量,系统的处理效果会急剧变差。 2. 简述生物滤池构造上分为哪几部分对滤料有何要求 典型的生物滤池由滤床,布水设备和排水系统三部分组成。要求滤料有以下特性:①能为微生物的栖息提供较大的比表面积;②能使废水以液膜状均匀分布于其表

(完整word版)2018高考真题全国卷1地理部分

绝密★启用前 2018年普通高等学校招生全国统一考试(全国卷Ⅰ) 文科综合能力测试(地理部分) 注意事项: 1.答题前,考生务必用0.5毫米黑色签字笔将自己的姓名、座号、考生号、县区和科类写在答题卡和试卷规定的位置上。 2.第Ⅰ卷每小题选出答案后,用2B铅笔把答题卡上对应题目的答案标号涂黑;如需改动,用橡皮擦干净后,再选途其他答案标号。写在试卷上无效。 3.第Ⅱ卷必须用0.5毫米黑色签字笔作答,答案必须写在答题卡各题目指定区域内相应的位置;如需改动,先划掉原来的答案,然后再写上新的答案;不能使用涂改液、胶带纸、修正带。不按以上要求作答的答案无效。 一、选择题:本题共35小题,每小题4分,共140分。在每小题给出的四个选项中,只有 一项是符合题目要求的。 近年来,世界上出现了将精密机械设备的组装或加工工厂建在地下的现象。例如,日本岐阜某激光加工机组装企业和我国大连某数控机床加工企业,都将工厂建于地面10米以下。据此完成1~3题。 1.将生产精密机械设备的工厂建在地下有利于 ①保持恒温环境②储存原材料和产品③降低生产成本④减小地面 震动影响 A.①③B.②③C.①④D.②④2.与岐阜相比,大连地下工厂的设计与施工较少考虑的问题是 A.防渗水B.防噪声C.防坍塌D.防地震 3.推断上述企业将工厂建在地下的直接目的是 A.增强保密程度B.保证产品品质 C.满足战备需要D.集约利用土地 户籍人口是指依法在某地公安户籍管理机关登记了户口在人口,常住人口是指实际居住在某地一定时间(半年以上)的人口。图1示意近十年来我国某直辖市户籍人口与常住人口的数量变化,据此完成4~5题。

4.根据图示资料推测,近十年来该直辖市 A.外来务工人口多于外出务工人口B.老年人口比例逐年下降 C.劳动力需求数量增加D.人口自然增长率逐年增加 5.该直辖市是 A.北京市B.天津市C.上海市D.重庆市 图2示意某河流上游河段的单侧断面。该河段两岸依次分布着海拔不同的四个平坦面T0、T1、T2、T3,平坦面上均堆积着河流沉积砾石。砾石的平均砾径T3>T0>T2>T1。洪水期河水仅能淹没T0。据此完成6–8题。 6.面积仍在扩大的平坦面是 A.T0 B.T1 C.T2 D.T3 7.该断面河流流速最大的时期为 A.T3形成时期B.T2形成时期C.T1形成时期D.T0形成时期 8.推测该河段所在区域的地壳经历了 A.持续下降B.持续抬升C.间歇性下降D.间歇性抬升 小明同学7月从重庆出发到贵州毕节旅游,收集到的相关高速公路信息如图3所示。据此完成9—11题。

高考地理真题全国卷

、选择题:本题共 11小题,每小题 4分,共 44 分。在每小题给出第四个选项中,只 有一项是符合题目要求的。 (全国卷I ) 图 1 为我国东部地区某城市街道机动车道与两侧非机动车道绿化隔离带的景观对比照 片,拍摄于 2017 年 3 月 25日,数年前,两侧的绿化隔离带按统一标准栽种了常绿灌木 如今,一侧灌木修剪齐整 (左图 ) ,另一侧则杂树丛生,灌木零乱 树隐有绿色,新叶呼之欲出。据此完成 1— 3 题。 1. 当地自然植被属于 2. 造成图示绿化隔离带景观差异的原因可能是该街道两侧 3. 图示常绿灌木成为我国很多城市的景观植物,制约其栽种范围的主要自然因素是 A.气温 B.降水 C.光照 D. 土壤 德国海德堡某印刷机公司创始人及其合作者设计了轮转式印刷机, 先河。至 1930 年,海德堡已成立了 6 家大的印刷机公司。同时,造纸,油墨和制版企业也 先后在海德堡集聚。 产业集聚、 挑剔的国内客户以及人力成本高等因素的综合作用, 激海德堡印刷机技术革新。据此完成 4—5 题。 4. 造纸、油墨和制版企业在海德堡集聚,可以节省 5. 海德堡印刷机在国际市场长期保持竞争优势,主要依赖于 A. 产量大 B. 价格低 C. 款式新 D. 质量优 图 2 示意我国西北某闭合流域的剖面。 该流域气候脚杆, 年均降水量仅为 210 毫米, 但 湖面年蒸发量可达 2 000 毫米,湖水浅,盐度饱和,水下已形成较好盐层,据此完成 题。 6. 盐湖面积多年稳定,标明该流域的多年平均实际蒸发量 A. 远大于 2 000 毫米 B. 约为 2 000 毫米 C. 约为 210 毫米 D. 远小于 210 毫米 7. 流域不同部位实际蒸发量差异显著,实际蒸发量最小的是 A. 坡面 B. 洪积扇 C. 河谷 D. 湖盆 8. 如果该流域大量种植耐旱植物,可能会导致 ;而 ( 右图 ) 。拍摄当日,这些杂 A. 常绿阔叶林 B. 落叶阔叶林 C.常绿硬叶林 D. 针叶林 A.用地类型差异 B. 居民爱好差异 C. 景观规划差异 D.行政管辖不同 开创了现代印刷业的 不断刺 A. 市场营销成本 B. 原料成本 C. 劳动力成本 D. 设备成本 6-8

2020年全国卷Ⅰ文综地理高考试题(含答案)

2020年普通高等学校招生全国统一考试 文科综合能力测试 一、选择题:本题共35小题,每小题4分,共140分。在每小题给出的四个选项中,只有一项是符合题目要求的。 治沟造地是陕西省延安市对黄土高原的丘陵沟壑区,在传统打坝淤地的基础上,集耕地营造、坝系修复、生态建设和新农村发展为一体的“田水路林村”综合整治模式,实现了乡村生产、生活、生态协调发展(图1)。据此完成1~3题。 图1 1.与传统的打坝淤地工程相比,治沟造地更加关注 A.增加耕地面积B.防治水土流失C.改善人居环境D.提高作物产量 2.治沟造地对当地生产条件的改善主要体现在 A.优化农业结构B.方便田间耕作C.健全公共服务D.提高耕地肥力 3.推测开展治沟造地的地方 ①居住用地紧张②生态环境脆弱③坡耕地比例大④农业生产精耕细作 A.①③B.①④C.②③D.②④ 为获得冬季防风、夏季通风的效果,我国东北平原的某城市对一居住区进行了相应的建筑布局规划,规划建筑物为高层(7层以上)和多层(7层或以下)。图2示意在该居住区内规划的两个居住片区、道路、出入口及当地盛行风向。据此完成4~6题。

图2 4.下列建筑布局中,适合居住片区II的是 ①并列排布②横向错列排布③自由排布④纵向错列排布 A.①B.②C.③D.④ 5.相对居住片区II,居住片区I的建筑布局宜 ①建筑密度大②建筑密度小③以高层建筑为主④以多层建筑为主 A.①③B.①④C.②③D.②④ 6.该居住区出入口的设计主要是为了避开 A.春季盛行风B.夏季盛行风C.秋季盛行风D.冬季盛行风 利用大型挖泥船将海底岩石搅碎,并将碎石和泥沙一起吹填造地,成为在海中建设人工岛的主要方式。图3示意人工岛地下淡水分布。据此完成7~8题。 图3 7.参照图3,在造岛物质满足水渗透的前提下,人工岛形成并保持相对稳定的地下淡水区的条件是 ①降水充沛且季节分配均匀②降水充沛且季节集中③人工岛足够长④人工岛足够宽 A.①③B.①④C.②③D.②④ 8.人工岛的地下淡水一般不作为日常生产生活水源,主要因为其

全国卷1地理试题

我国是世界闻名的陶瓷古国,明清时期,“瓷都”景德镇是全国的瓷业中心,产品远销海内外,20世纪80年代初,广东省佛山市率先引进国外现代化陶瓷生产线,逐步发展成为全国乃至世界最大的陶瓷生产基地。2003年,佛山陶瓷主产区被划入中心城区范围,陶瓷产业向景德镇等陶瓷产地转移。据此完成1—3题。 1.与景德镇相比,20世纪80年代佛山瓷业迅速发展的主要原因是() A.市场广阔 B.原材料充足 C.劳动力素质高 D.国家政策倾斜 2.促使佛山陶瓷产业向外转移的主要原因是佛山() A.产业结构调整 B.原产料枯竭 C.市场需求减小 D. 企业竞争加剧 3.景德镇吸引佛山陶瓷产业转移的主要优势是() A.资金充足 B.劳动力成本低 C.产业基础好 D.交通运输便捷 自20世纪50年代,荷兰的兰斯塔德地区经过多次空间规划,形成城市在外,郊区在内的空间特征:该区中间是一个接近3000平方千米的“绿心”——乡村地带;四个核心城市和其他城镇呈环状分布在“绿心”的周围,城镇之间设置不可侵占的绿地,四个核心城市各具特殊职能,各城市分工明确,通过快速交通系统连接成具有国际竞争力的城市群,近20年来,该地区城镇扩展程度小,基本维持稳定的城镇结构体系。据此完成4—6题。 4.兰斯塔德地区通过空间规划,限制了该地区各核心城市的() A.服务种类 B.服务等级 C.服务范围 D.服务人口 5. 兰斯塔德空姐规划的实施,显著促进该地区同类产业活动的()

A.技术创新 B.空间集聚 C.市场拓展 D.产品升级 6. 兰斯塔德空间规划的实施,可以() A.提高乡村人口比重 B.降低人口密度 C.促进城市竞争 D.优化城市天地结构 贝壳堤由死亡的贝类生物在海岸带堆积而成,在沿海地区经常分布着多条贝壳堤,标志着海岸线位置的变化,图1示意渤海湾沿岸某地区贝壳堤的分布。据此完成7—9题 7.在任一条贝壳堤的形成过程中,海岸线() A.向陆地方向推进 B.向海洋方向推进 C.位置稳定 D. 反复进退 8.沿岸流动的海水搬运河流入海口处的泥沙,并在贝壳堤外堆积。由此() A.形成新的贝壳堤 B.加大贝壳堤距海岸线的距离 C.形成河口三角洲 D.迫使河流改道 9.河流冲积物是该地海岸线变动的物质来源。多条贝壳堤的形成说明河流入海口() A.位置稳定,泥沙沉积量小 B.位置稳定,泥沙沉积量大 C.位置多次变动,泥沙沉积量小 D.位置多次变动,泥沙沉积量大 磷是土壤有机质的重要组成元素,也是植物生长的营养元素。土壤水分增加有利于磷累积,气温升高和流水侵蚀会减少土壤中磷累积量。图2示意我国四川西部某山地东坡土壤中磷累积量的垂直变化,据此完成10~11题。

全国卷高考文综试题地理部分全

绝密★启封前 2017年普通高等学校招生全国统一考试 文科综合能力测试全国卷Ⅰ 注意事项: 1、答题前,考生务必将自己的姓名、准考证号填写在试题卷和答题卡上,并将准考证号条形码粘贴在答题卡上的指定位置。用2B铅笔将答题卡上试卷类型A后的方框涂黑。 2、选择题的作答:每小时选出答案后,用2B铅笔把答题卡上对应题目的答案标号涂黑。写在试题卷、草稿纸和答题卡上的非答题区域均无效。 3、非选择题的作答:用签字笔直接答在答题卡上对应的答题区域内。写在试题卷、草稿纸和答题卡上帝非答题区域均无效。 4、选考题的作答:先把所选题目的题号在答题卡上指定的位置用2B铅笔涂黑。答案写在答题卡上对应的答题区域内,写在试题卷、草稿纸和答题卡上的非答题区域均无效。 5、考试结束后,请将本试题卷和答题卡一并上交。 第Ⅰ卷 本卷共35小题,每小题4分,共140分。在每小题给出的四个选项中,只有一项

是符合题目要求的。 一、选择题:本题共35小题,每小题4分,共140分。在每小题给出第四个选项中,只有一项是符合题目要求的。 图1为我国东部地区某城市街道机动车道与两侧非机动车道绿化隔离带的景观对比照片,拍摄于2017年3月25日,数年前,两侧的绿化隔离带按统一标准栽种了常绿灌木;而如今,一侧灌木修剪齐整(左图),另一侧则杂树丛生,灌木零乱(右图)。拍摄当日,这些杂树隐有绿色,新叶呼之欲出。据此完成1—3题。 图1 1.当地自然植被属于 A.常绿阔叶林 B.落叶阔叶林 C.常绿硬叶林 D.针叶林 2.造成图示绿化隔离带景观差异的原因可能是该街道两侧

A.用地类型差异 B.居民爱好差异 C.景观规划差异 D.行政管辖不同 3.图示常绿灌木成为我国很多城市的景观植物,制约其栽种范围的主要自然因素是 A.气温 B.降水 C.光照 D.土壤 【答案】1.B ??2.D ??3.A 【解析】 1.由题中3月25日,杂树中隐有绿色,新叶呼之欲出,可知此处植被在冬季时,树叶落完,春季的时候长出新叶,所以此处的自然植被为温带落叶阔叶林。 2.同一街道两侧,植被类型不一样,此处都为绿化用地,用地类型相同,景观规划相同,最可能该街道两侧行政管辖不同。 3.制约常绿灌木栽种范围的主要自然因素是热量。由于常绿灌木叶片较小,对寒冷气

2019年高考全国卷1地理试题及解析

2019年高考全国卷1地理试题及解析 四川省南充市白塔中学陈禄春 一、选择题:本题共11小题,每小题4分,共44分。在每小题给出的四个选项中,只有一项是符合题目要求的。 20世纪80年代开始,长江三角洲地区某县村办企业涌现,形成“村村冒烟”现象。2016年该县开始实施村集体经济“抱团飞地”发展模式:由县、镇统筹,整合腾退的村办企业建设用地指标和补贴资金,各村以股份合作形式(抱团)在发展条件优越的城镇(飞地)联合建设创新创业中心,并建立保证各村收益的机制。据此完成1~3题。 1.“村村冒烟”主要指的是当时该县村办企业() A.燃料来源分散B.空间布局分散 C.原料来源分散D.产品市场分散 解析考查阅读理解能力。“20世纪80年代开始,长江三角洲地区某县村办企业涌现,形成“村村冒烟”现象。”长江三角洲地区当时的企业主要为劳动密集型企业,需要的燃料、原料少,不靠近市场;“村村冒烟”是指“村办企业涌现”,每个村都有企业,说明当时该县村办企业空间布局分散。所以选B 2.实施“抱团飞地”发展模式,可以() ①弥补劳动力不足②缓解建设用地紧张 ③提升基础教育水平④壮大集体经济实力 A.①③B.②③C.①④D.②④ 解析考查阅读理解能力和影响企业发展的因素及产业集聚的好处。由“2016年该县开始实施村集体经济“抱团飞地”发展模式:由县、镇统筹,整合腾退的村办企业建设用地指标和补贴资金,各村以股份合作形式(抱团)在发展条件优越的城镇(飞地)联合建设创新创业中心”。首先注意时间为2016年,当时长三角地区人口稠密、土地较紧张;二是“抱团飞地”的含义。由县、镇统筹,整合腾退的村办企业建设用地指标和补贴资金--节约用地;各村以股份合作形式(抱团)在发展条件优越的城镇(飞地)联合建设创新创业中心(企业)--取得规模效应。所以选D 3.“抱团飞地”发展模式,主要体现了() A.城乡统筹创新B.生活方式创新C.农业发展创新D.科学技术创新 解析考查阅读理解能力。由“由县、镇统筹,整合腾退的村办企业建设用地指标和补贴资金,各村以股份合作形式(抱团)在发展条件优越的城镇(飞地)联合建设创新创业中心”,可知为:联合建设创新创业中心(企业)--可得城乡统筹整合创新。所以选A 图1示意2015年欧盟境内欧盟籍和非欧盟籍的人口结构。据此完成4~5题。

《环境工程学》期末考试复习题及参考答案

环境工程学复习题 (课程代码272336) 一、名词解释 1、堆肥化 参考答案:利用自然界中广泛存在的微生物,通过人为的调节和控制,促进可生物降解的有机物向腐殖质转化的生物过程。 2、逆温 参考答案:指对流层中某层次出现气温上热下冷的现象。 3、中位径(d c50) 参考答案:指粒子群中将颗粒质量平分一半时所对应的颗粒的粒径。 4、富营养化 参考答案:水体中N、P营养物质富集,引起藻类及其它浮游生物的迅速繁殖,水体溶解氧下降,使鱼类或其他生物大量死亡、水质恶化的现象 5、农业退水 参考答案:农作物栽培、牲畜饲养、农产品加工过程中排出的污水。 6、水环境容量 参考答案:在满足水环境质量标准要求的前提下的最大允许污染负荷量,或称纳污能力。 7、污泥负荷 参考答案:指单位时间单位微生物质量所承受的有机物的量,单位为kgBOD5/(kgMLVSS·d)。 8、物理性污染 参考答案:物理环境中声、振动、电磁辐射、放射性、光、热等在特定时间和空间中的强度过高或过低,危害人体健康、生态环境、仪器设备,造成的污染或异常,就是物理性污染。 9、热解 参考答案:指将有机物在无氧或缺氧状态下进行加热蒸馏,使有机物产生裂解,经冷凝后形成各种新的气体、液体和固体,从中提取燃料油、油脂和燃料气的过程。 10、自养型微生物 参考答案:自养型微生物以无机物为底物(电子供体),其终点产物为二氧化碳、氨和水 1 / 20

等无机物,同时放出能量。 11、容积负荷 参考答案:单位为:kgBOD5/(m3·d),指单位时间单位反应器容积所承受的有机物的量。 12、废物固化 参考答案:指用物理-化学方法将有害废物固定或包封在惰性基材中,使之呈现化学稳定性或密封性的一种无害化处理方法。 13、理论烟气体积 参考答案:燃料在供给理论空气量下完全燃烧,且生成的烟气中只有CO2、SO2、H2O、N2这四种气体,此时烟气所具有的体积为理论烟气体积(又称湿烟气体积)。 14、表面水力负荷 参考答案:单位为m3/(m2·d),指单位时间内通过单位沉淀池表面积的污水流量。 15、噪声 参考答案:噪声是声波的一种,具有声音的所有特征。从物理学的特点来看,噪声是指声波的频率和强弱变化毫无规律、杂乱无章的声音。 16、放射性废物 参考答案:放射性废物是含有放射性核素或被放射性核素污染,其浓度或活度大于国家审管部门规定的清洁解控水平,并且预计不再利用的物质。 17、破碎比 参考答案:指在破碎过程中,原废物粒度与破碎产物粒度的比值。表示废物粒度在破碎过程中减小的倍数,也表征废物被破碎的程度。 18、浸出率 参考答案:指固化体浸于水中或其它溶液中时,其中有害物质的浸出速度。 19、堆肥 参考答案:指废物经过堆肥化处理,制得的成品。 20、焚烧 参考答案:在高温炉内(800-1000。C),废物中的可燃组分与空气中的O2发生剧烈的化学反应,转化为高温气和性质稳定的固体残渣并释放热量的过程。 21、吸声系数 参考答案:材料吸收的声能与入射到材料上的总声能的比值。 22、滤波器 2 / 20

2015年高考全国卷1文综地理试题 解析版

一、选择题:本题共11小题,每小题4分,共44分。在每小题给出的四个选项中,只有一项是符合题目要求的。 雨水花园是一种模仿自然界雨水汇集、渗漏而建设的浅凹绿地,主要用于汇聚并吸收来自屋顶或地面的雨水,并通过植物及各填充层的综合作用使渗漏的雨水得到净化。净化后的雨水不仅可以补给地下水,也可以作为城市景观用水、厕所用水等。图1示意雨水花园结构。据此完成1-3题。 1.铺设树皮覆盖层的主要目的是: A.为植物提供养分 B.控制雨水渗漏速度 C.吸附雨水污染物 D.保持土壤水分 2. 对下渗雨水净化起主要作用的填充层是 A. 树皮覆盖层和种植土层 B. 种植土层和砂层 C. 砂层和砾石层 D. 树皮覆盖层和砾石层 3. 雨水花园的核心功能是 A. 提供园林观赏景观 B. 保护生物多样性性 C. 控制雨洪和利用雨水 D. 调节局地小气候 1、D 2、B 3、C 【解析】 试题分析: 1、通过简图可发现该模式的底部为砂层和砾石层,铺设此层利于让经过上层土层处理的雨水下渗,并把渗下的雨水导出流走。故该雨水花园地下部分含水量变化很大,为保证地表植物生长,必须保持土壤合适的水分条件,覆盖树皮可达到此目的。 2、雨水下渗后种植土层和砂层可对雨水直到过滤作用,达到在一定程度上净化雨水的作用。B正确。 3、雨水花园的核心功能是增加雨水的下渗量并回收利用雨水,同时因减小了地表径流,可有效起到降低暴雨后城市内涝的频率和程度。故C正确。 考点:水循环 甘德国际机场(图2)曾是世界上最 繁忙的航空枢纽之一,当时几乎所有横 跨北大西洋的航班都要经停该机场补充 燃料.如今,横跨北大西洋的航班不再需 要经停此地.据此完成4~6题. 4. 导致甘德国际机场成为世界上最繁 忙机场的主要因素是 A. 位置 B. 经济

相关文档
相关文档 最新文档