9.2 mm Round Type LED with Collar, Viewing Angle - 36°
72A Series
All Dimensions are in mm (inch)
Typ.Max
72A70D-4001GaP/GaP Hi-Red Red Diffused 700 1.8 2.6372A70T-4001GaP/GaP Hi-Red Red Transparent 700 1.8 2.61272A71D-4001GaAsP/GaP Hi-Eff Red Red Diffused 640 1.8 2.610072A71T-4001GaAsP/GaP Hi-Eff Red Red Transparent 640 1.8 2.640072A41D-4001GaP/GaP Yellow Green Green Diffused 570 1.8 2.64072A41T-4001GaP/GaP Yellow Green Green Transparent 570 1.8 2.615072A51D-4001GaAsP/GaP Yellow Yellow Diffused 585 1.8 2.64072A51T-4001GaAsP/GaP Yellow Yellow Transparent 585 1.8 2.615072A61D-4001GaAsP/GaP Orange Orange Diffused 605 1.8 2.64072A61T-4001GaAsP/GaP Orange Orange Transparent 605 1.8 2.615072A11D-4001GaN Blue Blue Diffused 470 2.6 3.850072A11C-4001GaN Blue Water 470 2.6 3.8250072A22C-4001GaN Blue Green Water 505 2.6 3.8800072A32C-4001GaN Green Water 525
2.6
3.8800072A82C-4001GaN White Water 2.6 3.8500072A82W-4001
GaN
White
Water Diffused
2.6
3.8
1000
Package Dimension
Directivity Radiation
Electrical Characterstics
Part No.
Chip Material
Emitted Colour
Lens Colour
Wave Length
Electro - Optical
Characterstics (I f = 20mA)λP (nm)
V f (v)I v (mcd)
72A Rev100506D
Other Parameters applicable for all LEDs 72A Series
Reverse
Voltage V r
Forward Current I f Forward Current Peak I fp * Power Pd
Operating
Temp T opr
Storage
Temp T stg
(v)
(mA)(mA)(mW)(oC) (oC)Green (GaP)62510080 -25 ~ +80 -40 ~ +40Red (GaP)62510080 -25 ~ +80 -40 ~ +40Orange
(GaAsP/GaP)62510080 -25 ~ +80 -40 ~ +40Yellow
(GaAsP/GaP)62510080 -25 ~ +80 -40 ~ +40Ultra Yellow (AlGaInP)63010080 -25 ~ +80 -40 ~ +40Ultra Orange (AlGaInP)63010080 -25 ~ +80 -40 ~ +40Ultra Red (AlGaInP)63010080 -25 ~ +80 -40 ~ +40Ultra Yellow Green 63010080 -25 ~ +80 -40 ~ +40Blue
(GaN/SiC)
6
30
100
170
-25 ~ +80
-40 ~ +40
* 1/10 Duty Cycle. 0.1 ms Pulse Width
Temp of Soldering Bath Max Soldering Time
Distance from Solder Joint to
Case
Temp of Soldering Iron Max
Soldering Time
Distance from Solder
to case ≤ 260 oC
3S
>2mm
≤ 300 oC
3S
>2mm
≤ 260 oC
5S
>4mm
≤ 300 oC
5S
>4mm
Component Disposal Instructions
1. All Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental
Legislation of their Country.
2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
LEDs
Disclaimer
Electrical Parameter (at T a = 25oC)
Colour
Soldering Instructions
Types
DIP and Wave Soldering
Iron Soldering (1.5 mm Iron Tip)
The product information and the selection guides facilitate selection of the nxt LEDs best suited for application in your product(s)as per your requirement.It is recommended that you completely review our Data Sheet(s)so as to confirm that the LED(s)meet functionality parameters for your application.The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable.CDIL however,does not assume responsibility for inaccuracies or incomplete information.Furthermore,CDIL does not assume liability whatsoever,arising out of the application or use of any CDIL product;neither does it convey any license under its patent rights nor rights of others.These products are not designed for use in life saving/support appliances or systems.CDIL customers selling these products (either as individual LEDs or incorporated in their end products),in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India.
Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119
email@https://www.wendangku.net/doc/f411144037.html, https://www.wendangku.net/doc/f411144037.html,
72A Rev100506D