FEATURES
?Linear resistance vs temperature
?Accurate and Interchangeable
?Excellent stability
?Small for fast response
?Wide temperature range
?3-packaging options
TYPICAL APPLICATIONS
?HVAC - room, duct and refrigerant
equipment
?Electronic assemblies - thermal man-
agement, temperature compensation
?Process control - temperature regu-
lation
HEL-700 T hin Film Platinum RT Ds (Re-
sistance Temperature Detectors) provide
excellent linearity, accuracy, stability and
interchangeability. Resistance changes
linearly with temperature. Laser trimming
provides ±0.3°C interchangeability at
25°C.
1000?, 375 alpha provides 10X greater
sensitivity and signal-to-noise. Both
1000?and 100?provide interchange-
abilities of ±0.6°C or better from -100°C to
100C, and ±3.0°C at 500°C.
MOUNTING DIMENSIONS (for reference only)
HEL-700 Ribbon Lead
HEL-700 Radial Chip
HEL-700 SMT (Axial) Flip Chip
ORDER GUIDE
HEL-700
Thin Film Platinum RTD
-U1000?, 0.00375 ?/?/°C
-T100?, 0.00385 ?/?/°C DIN Standard
-0±0.2% Resistance Trim (Standard)
-1±0.1% Resistance Trim (Optional)
-A Radial Ribbon Lead
-B Radial Chip
-C SMT Axial Flip Chip (1000?
ONLY)
Fig. 1: Linear Output Voltage
Fig. 2: Adjustable Point (Comparator) Interface Temperature
FUNCTIONAL BEHAVIOR
R T ?R 0(1+AT +BT 2?100CT 3+CT 4)
RT ?Resistance (?) at temperature T (°C)R 0?Resistance (?) at 0°C T ?Temperature in °C A ??+?? B ????C T <0????
1001002
1004CONSTANTS Alpha,?(°C -1)0.00375
0.003850±0.000029±0.000010Delta,?(°C) 1.605 ±0.009 1.4999 ±0.007Beta,?(°C)0.160.10863A (°C -1) 3.81×10-3 3.908×10-3B (°C -2)?6.02×10-7?5.775×10-7C (°C -4)
?6.0×10-12
?4.183×10-12
Both ??0 and C ?0 for T >0°C
RESISTANCE VS TEMPERATURE CURVE
ACCURACY VS TEMPERATURE
HEL-700 platinum RTDs are available in two base resistance trim tolerances: ±0.2% or ±0.1%. The corresponding resistance interchangeability and temperature accuracy for these toler-ances are:Tolerance Standard ±0.2%Optional ±0.1%Temperature
±?R*±?T ±?R*±?T (°C)
(?)(°C)(?)(°C)?200 6.8 1.6 5.1 1.2?100
2.90.8 2.40.60 2.00.5 1.00.3100 2.90.8 2.20.6200 5.6 1.6 4.3 1.23008.2 2.4 6.2 1.840011.0
3.28.3 2.550012.5
4.09.6 3.0600
15.1
4.8
10.4
3.3
*1000?RTD. Divide ?R by 10 for 100?RTD.
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product.
SPECIFICATIONS Sensor Type Thin film platinum RTD;
R 0?1000 ?@0°C; alpha ?0.00375 ?/?/°C R 0?100 ?@0°C; alpha ?0.00385 ?/?/°C Temperature Range ?200 to +540°C (?300 to +1000°F)
Temperature Accuracy ±0.5°C or 0.8% of temperature, °C (R 0±0.2% trim), whichever is greater
±0.3°C or 0.6% of temperature, °C (R 0±0.1% trim), whichever is greater (optional)Base Resistance and
Interchangeability, R 0±?R 01000 ±2 ?(±0.2%) @0°C
1000 ±1 ?(±0.1%) @0°C (optional)
Linearity ±0.1% of full scale for temperatures spanning ?40°to +125°C ±2.0% of full scale for temperatures spanning ?200°to +540°C Time Constant <0.15 seconds in water @3 ft./sec.
<1 second on metal surfaces: <4 seconds in air @10 ft./sec.Operating Current 2 mA max. For self-heating errors of 1°C 1 mA recommended
Stability Better than 0.25°C/year: 0.05°C/5 years for occupied environments Self-Heating 0.3 mW/°C
Insulation Resistance >50 M ?@50 VDC @25°C
Case Material
99% alumina support, vapor deposited alumina passified resistance portion, refractory glass passified overall
Lead Material – Ribbon Platinum ribbon, 0.002 ×0.010 ×0.16 in. long nominal Lead Pull Strength – Ribbon
200 grams nominal pulling up from surface
FEATURES
?Linear resistance vs temperature
?Accurate and Interchangeable
?Excellent stability
?Teflon or fiberglass lead wires
?Wide temperature range
?Ceramic case material
TYPICAL APPLICATIONS
?HVAC – room, duct and refrigerant
equipment
?Instrument and probe assemblies –
temperature compensation
?Process control – temperature
regulation
HEL-700 Series elements are fully assem-
bled, ready to use directly or in probe
assemblies without the need for fragile
splices to extension leads.
The 1000?, 375 alpha version, provides
10X greater sensitivity and signal-to-
noise. Optional N IST calibrations im-
prove accuracy to ±0.03°C at 0°C.
ORDER GUIDE
HEL-705
28 ga. TFE Teflon, 2-wire only
HEL-707
28 ga. Fiberglass, 2-wire only
HEL-71128 ga. TFE Teflon (2-wire 1000?, 3-wire 100?)
HEL-71228 ga. Fiberglass (2-wire 1000?, 3-wire 100?)
HEL-71624 ga. TFE Teflon (2-wire 1000?, 3-wire 100?)
HEL-71724 ga. Fiberglass (2-wire 1000?, 3-wire 100?)
-U1000?, 0.00375 ?/?/°C
-T100?, 0.00385 ?/?/°C DIN Standard
-0±0.2% Resistance Trim (Standard)
-1±0.1% Resistance Trim (Optional)
-12Lead wire length, 12 inches
-00No NIST calibration
-C1NIST @0°C
-C2NIST @0 & 100°C
-C3NIST @0, 100 & 260°C
MOUNTING DIMENSIONS (for reference only)
Fig. 1: Wheatstone Bridge 2-Wire Interface
Fig. 2: Linear Output Voltage
Fig. 3: Adjustable Point (Comparator) Interface
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive
to electrostatic discharge (ESD). To prevent ESD-induced
damage and/or degradation, take normal ESD precautions
when handling this product.
Temperature
FUNCTIONAL BEHAVIOR
R T ?R 0(1+AT +BT 2?100CT 3+CT 4)
RT ?Resistance (?) at temperature T (°C)R 0?Resistance (?) at 0°C T ?Temperature in °C A ??+?? B ????C T <0????
1001002
1004CONSTANTS Alpha,?(°C -1)0.003750.003850±0.000029±0.000010Delta,?(°C) 1.605 ±0.009 1.4999 ±0.007Beta,?(°C)0.160.10863A (°C -1) 3.81×10-3 3.908×10-3B (°C -2
)
?6.02×10
-7
?5.775×10
-7
C (°C -4)?6.0×10-12?4.183×10-12
Both ??0 and C ?0 for T >0°C
RESISTANCE VS TEMPERATURE CURVE
ACCURACY VS TEMPERATURE Tolerance Standard ±0.2%Optional ±0.1%Temperature
±?R*±?T ±?R*±?T (°C)
(?)(°C)(?)(°C)?200 6.8 1.6 5.1 1.2?100
2.90.8 2.40.60 2.00.5 1.00.3100
2.90.8 2.20.6200 5.6 1.6 4.3 1.23008.2 2.4 6.2 1.840011.0
3.28.3 2.550012.5
4.09.6 3.0600
15.1
4.8
10.4
3.3
*1000?RTD. Divide ?by 10 for 100?RTD.
NIST CALIBRATION
NIST traceable calibration provides resistance readings at 1, 2 or 3 standard temperature points to yield a resistance versus tem-perature curve with 10x better accuracy.Calibration 1 Point 2 Point 3 Point T (°C)±?T (°C)±?T (°C)
±?T (°C)
-2000.9——-1000.50.270.1500.030.030.031000.40.110.072000.80.20.08300 1.20.33 6.2400 1.60.58.3500 2.00.89.6600
2.6
1.2
10.4
SPECIFICATIONS Sensor Type Thin film platinum RTD;
R 0?1000 ?@0°C; alpha ?0.00375 ?/?/°C R 0?100 ?@0°C; alpha ?0.00385 ?/?/°C Temperature Range TFE Teflon: ?200°to +260°C (?320°to +500°F)Fiberglass: ?75°to +540°C (?100°to +1000°F)
Temperature Accuracy ±0.5°C or 0.8% of temperature, °C (R 0±0.2% trim), whichever is greater
±0.3°C or 0.6% of temperature, °C (R 0±0.1% trim), whichever is greater (optional)Base Resistance and
Interchangeability, R 0±?R 01000 ±2 ?(±0.2%) @0°C
1000 ±1 ?(±0.1%) @0°C (optional)
Linearity ±0.1% of full scale for temperatures spanning ?40°to +125°C ±2.0% of full scale for temperatures spanning ?75°to +540°C
Time Constant <0.5 sec. 0.85 inch O.D. in water at 3 ft/sec; <1.0 sec, 0.85 inch O.D. in still water Operating Current 2 mA maximum for self heating errors of <1°C; 1 mA recommended Stability <0.25°C/year; 0.05°C per 5 years in occupied environments Self Heating
<15 mW/°C for 0.85 O.D. typical Insulation Resistance >50 M ?at 50 VDC at 25°C
Construction Alumina case; Epoxy potting (Teflon leads); Ceramic potting (fiberglass leads)Lead Material
Nickel coated stranded copper, Teflon or Fiberglass insulated