?
BYT 08P-1000
FAST RECOVERY RECTIFIER DIODE
VERY HIGH REVERSE VOL T AGE CAP ABILITY VERY LOW REVERSES RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING
SUIT ABLE APPLICATIONS
FREE WHEELING DIODE IN CONVERTERS AND MOTOR CONTROL CIRCUITS RECTIFIER IN S.M.P .S.October 1999 - Ed: 2A 1/4
TO220AC (Plastic)
Cathode connected to case
Symbol Parameter
Value Unit V RRM Repetitive Peak Reverse Voltage 1000V V RSM Non Repetitive Peak Reverse Voltage 1000V I FRM Repetitive Peak Forward Current t p ≤ 10μs
100A I F (RMS)RMS Forward Current 16A I F (AV)Average Forward Current
T c = 115°C δ = 0.58A I FSM Surge Non Repetitive Forward Current t p = 10ms Sinusoidal 50A P Power Dissipation
T c = 115°C 17W T stg
T j
Storage and Junction T emperature Range
- 40 to + 150- 40 to + 150
°C
ABSOLUTE RA TINGS (limiting values)
Symbol Parameter
Value Unit R th (j - c)
Junction-case
2
°C/W
THERMAL RESISTANCE
K
A
Synbol Test Conditions
Min.
Typ.
Max.
Unit I R
T j = 25°C
V R = V RRM
35
μA
T j = 100°C 2mA V F T j = 25°C I F = 8A
1.9
V
T j = 100°C
1.8
ST A TIC CHARACTERISTICS
ELECTRICAL CHARACTERISTICS Symbol Test Conditions
Min.
Typ.
Max.
Unit t rr T j = 25°C
I F = 1A di F /dt = - 15A/μs V R = 30V 155ns
I F = 0.5A I R = 1A I rr = 0.25A
65
RECOVERY CHARACTERISTICS
Symbol Test Conditions
Min.
Typ.
Max.
Unit t IRM
di F /dt = - 32A/μs
V CC = 200 V I F = 8A
L p ≤ 0.05μH T j = 100°C See Figure 1
200ns
di F /dt = - 64A/μs 120
I RM
di F /dt = - 32A/μs
5.5A di F /dt = - 64A/μs
6
TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance)
Symbol Test Conditions
Min.
Typ.
Max.Unit C =
V RP V CC
T j = 100°C V CC = 200V I F = I F (AV)
d iF /dt = - 8A/μs L p = 12μH Se
e figure 2
4.5
TURN-OFF OVERVOL T AGE COEFFICIENT (With Series Inductance)
T o evaluate the conduction losses use the following equations:V F = 1.47 + 0.041 I F P = 1.47 x I F(AV) + 0.041 I F 2(RMS)
2/4
BYT 08P-1000
BYT 08P-1000 Figure 1. Turn-off switching characteristics (without series inductance).
urn-off switching characteristics (with series inductance).
Figure 2. T
PACKAGE MECHANICAL DA TA : TO220AC Plastic
Cooling method: by conduction (method C)Marking: type number Weight: 2.42g
Recommended torque value: 80cm. N Maximum torque value: 100cm. N
A
C
D
E
M
L7H2
? I
L5L6
L9L4
G
F1
F
L2
REF.
DIMENSIONS
Millimeters Inches Min.Max.Min.Max.A
4.40 4.600.1730.181C 1.23 1.320.0480.051D 2.40 2.720.0940.107E 0.490.700.0190.027F 0.610.880.0240.034F1 1.14 1.700.0440.066G 4.95
5.150.1940.202H210.0010.400.3930.409L21
6.40 typ.0.645 typ.L413.0014.000.5110.551L5 2.65 2.950.1040.116L615.2515.750.6000.620L7 6.20 6.600.2440.259L9 3.50 3.930.1370.154M 2.6 typ.0.102 typ.Diam. I
3.75 3.850.1470.151
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics ? 1999 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMP ANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.
https://www.wendangku.net/doc/0a1379442.html,
4/4
BYT 08P-1000