15 Power PCB Relay G2R
Note:1.The relationship between the model, the length L, and the
color of the insulating coating is shown in the following table.
2.The insulating coating must be able to withstand a voltage of 3,000 V for 1 minute. Use either PE or PA as the material of the insulating coating.
3.The positions of the ends of the insulating coating must not vary more than 0.5 mm.
4.The characteristics of the socket bridge are shown in the following table.
Note:1.
and indicate mounting orientation marks.
2. A tolerance of ±0.10 (0.004) applies to the above dimensions.
Insulating coating
1.2 dia. conductor L
(See note 1.)
9
14
Socket
Model Length (L) mm
Color of insulating coating P2RM-SR 14.3
Red P2RM-SB
Blue
Clip and Release Lever
Item
Characteristic
Rated ON current 10 A Rated insulation voltage 250 VAC Temperature rise 35°C max.
Dielectric strength 3,000 VAC for 1 minute Ambient operating temperature
-55 to 70°C
Terminal arrangement Mounting holes
Power PCB Relay G2R 16
Note:1.
and indicate mounting orientation marks.
2. A tolerance of ±0.10 (0.004) applies to the above dimensions.
Terminal arrangement
Mounting holes (Bottom view)
Terminal arrangement
Mounting holes (Bottom view)