SPECIFICATION
MPS-65-3.3MPS-65-5MPS-65-7.5MPS-65-12MPS-65-13.5MPS-65-15MPS-65-24MPS-65-27MPS-65-48MODEL
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
OUTPUT
LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE
EFFICIENCY(Typ.)INPUT
INRUSH CURRENT(max.)LEAKAGE CURRENT WORKING HUMIDITY
WORKING TEMP.
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION OTHERS
NOTE
PACKING
OVER LOAD
OVER VOLTAGE AC CURRENT
3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V 12A 12A 8A 5.2A
4.7A 4.2A 2.7A 2.4A 1.35A 0 ~ 1
5.2A 0 ~ 13.8A 0 ~ 9.6A 0 ~ 6A 0 ~ 5.4A 0 ~ 4.8A 0 ~ 3A 0 ~ 2.7A 0 ~ 1.5A 39.6W
60W 60W 62.4W 63.5W 63W 64.8W 64.8W 64.8W 72W(+3.3V:50W;+5V:69W)with 18CFM min. Forced air convection
80mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
3.0%
3.0% 3.0% 2.0%2.0%
2.0% 2.0%2.0% 2.0%2.0% 2.0%2.0% 2.0%
2.0%
1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0% 1.0%3.0% 3.0%
3.0% 2.0%90 ~ 264VAC 127 ~ 370VDC 47 ~ 440Hz 66%
74%
76%
77%
78%
79%
80%
80%
80%
1.6A/115VAC 0.9A/230VAC
COLD START 20A/115VAC 40A/230VAC <0.3mA / 264VAC
73 ~ 105W (3.3V:51 ~ 75W)(5V:70 ~ 105W)rated output power
Protection type :Hiccup mode, recovers automatically after fault condition is removed Protection type :Hiccup mode, recovers automatically after fault condition is removed -20 ~ +85, 10 ~ 95% RH
0.04%/(0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X,Y, Z axes 359.7Khrs min. MIL-HDBK-217F (25)
127*76.2*42mm (L*W*H)
0.23Kg; 54pcs/14.6Kg/1.35CUFT
800ms, 30ms, 20ms/230VAC 800ms, 30ms, 12ms/115VAC at full load
-10 ~ +60(Refer to output load derating curve)20 ~ 90% RH non-condensing
SAFETY STANDARDS HARMONIC CURRENT EMS IMMUNITY
UL2601-1,TUV EN60601-1, IEC601-1Approved Compliance to EN55011 (CISPR11) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN60601-1-2 Medical level, criteria A
Universal AC input / Full range Low leakage current
0.3mA
Protections:Short circuit/Over load/Over voltage Cooling by free air convection 100% full load burn-in test
Fixed switching frequency at 45KHz 3 years warranty
Features :
WITHSTAND VOLTAGE
ISOLATION RESISTANCE I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG:100M Ohms/500VDC RIPPLE & NOISE (max.)Note.2VOLTAGE TOLERANCE Note.3ENVIRONMENT SAFETY &EMC (Note 4)
PROTECTION
EMI CONDUCTION & RADIATION 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Mounting holes M1 and M2 should be grounded for EMI purposes.
OUTPUT POWER (max.) 3.8 ~ 4.46V
5.75 ~
6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 1
7.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V
55.2 ~ 64.8V
VOLTAGE ADJ. RANGE
2.97 ~
3.63V
4.5 ~
5.5V
6.75 ~ 8.25V 10.8 ~ 13.2V 12.2 ~ 14.85V 13.5 ~ 16.5V 21.6 ~ 26.4V 24.3 ~ 29.7V 43.2 ~ 52.8V