10mm ROUND LED LAMP
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No.
Dice
Lens Type
Iv (mcd) [2] @ 20mA Viewing Angle [1] Min.
Typ. 2θ1/2 WP819SURKMGKW
Hyper Red (InGaAlP)
WHITE DIFFUSED
380
750 Mega Green (InGaAlP)
50
130
50°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red Mega Green 650 574 nm I F =20mA λD [1] Dominant Wavelength Hyper Red Mega Green 635 570 nm I F =20mA Δλ1/2 Spectral Line Half-width
Hyper Red Mega Green 28 20 nm I F =20mA C Capacitance Hyper Red Mega Green 35 15 pF V F =0V;f=1MHz V F [2] Forward Voltage Hyper Red Mega Green 1.95 2.1 2.5 2.5 V I F =20mA I R
Reverse Current
Hyper Red Mega Green
10 10
uA
V R = 5V
Parameter Hyper Red
Mega Green
Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185
150
mA Reverse Voltage
V
Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3]
260°C For 5 Seconds
5