Overview
This 1.5 inch low temperature poly- silicon TFT-LCD module is suitable for digital still camera.
Features
? Diagonal 3.8cm (1.5inch) display size. ? 521 × 218 = 113,578 dots. ? RGB delta color arrangement.
? Operating temperature (panel) is -10 to +60°C. Ambient temperature during storage is -20 to +70°C. ? Slim design, light weight and narrow frame. (t=0.7mm glass) ? Up / down and right / left inverse function. ? Built-in level shifter circuit.
? Conform to NTSC, PAL when using recommended IC : LV4135W, LV4137W, (LV4139W : Under development) ? Glare polarizer.
? Builds in white LED backlight unit. (No inverter unit.)
? Panel power consumption is Typ.55mW at NTSC. Back-light power consumption is 210mW. (reference) ? Display surface luminance is typ 150cd/m2.
Specifications
Item Specifications Unit Remarks
Dot count (H) × (V) 521 × 218 dot
Effective display dimensions (H) × (V) 30.25 × 22.67 mm Display size (diagonal) 3.8 (1.5inch) cm Dot pitch (H) × (V) 0.058 × 0.104 mm Color arrangement RGB Delta - External Dimensions (W) × (H) × (D) TYP 37.0 × 32.8 × 5.3 mm Note1
Weight Approx. 12 g
*Note1: Excluding flexible cable and protrusions.
Low-Temperature Polysilicon
1.5-inch TFT LCD Module ALP121AGX
LCD Module
Absolute Maximum Ratings at VSS=0V
Item Symbol Ratings Unit
H driver power supply voltage HVDD -1.0 to +14 V V driver power supply voltage VVDD -1.0 to +14 V Common electrode voltage VCOM -1.0 to +14 V Driving direction signal voltage CSH, CSV
-1.0 to +14 V H driver input voltage STH, XSTH, CKH1, CKH2
-1.0 to +14 V V driver / precharge data input voltage
STV, XSTV, CKV1, CKV2, ENB, XENB, PCG, XPCG
-1.0 to +14 V Video / precharge data input voltage VG, VR, VB, VPCD
-1.0 to +13 V Operating temperature (panel) Topr -10 to +60 °C Storage temperature
Tstg
-20 to +70
°C
Operating Conditions Power supply voltage HVDD LV4135W LV4137W : 12.0V ± 0.3V VVDD LV4135W LV4137W : 12.0V ± 0.3V VSS LV4135W LV4137W : 0V
Item Symbol MIN TYP MAX Unit
Low VHIL -0.3 0.0 0.3 V H driver input voltage High VHIH 2.5 3.0 4.0 V Low VVIL -0.3 0.0 0.3 V V driver input voltage High VVIH
2.5
3.0
4.0 V
Low VSIL -0.3 0.0 0.3 V CSV, CSH
High VSIH 11.5 VDD VDD V
Video signal
center voltage
LV4135W, LV4137W
VVC 5.0 5.2 5.4 V Video signal input voltage range *1 VG, VR, VB VVC-3.5 - VVC+3.5 V Common electrode voltage*2 VCOM (VVC-0.2)-0.2 (VVC-0.2) (VVC-0.2)+0.2 V Precharge data signal *1
VPCD
VVC±1.5
VVC±2.0
VVC±2.5
V
*1 Video signal and precharge data signal shall be input symmetrically around VVC. *2 Set common electrode voltage to the optimum voltage.
Optical Specifications
Item Symbol Condition MIN TYP MAX Unit
Contrast ratio
CR
25°C
- 100 - -
θT 15
θB 35
θL 45 Viewing angle range
θR
CR >= 10 - 45
- deg
Pin Function
Pin No Symbol Function
1 NC Leave this pin open
2 COM Common electrode voltage
3 CKV1 V clock 1
4 CKV2 V clock 2
5 VVDD VDD for V drive
6 STV V start signal
7 XSTV Inverted signal of STV
8 CSV Up / down inverse control signal (H : Normal scan, L : Reverse scan)
signal
Enable
9 ENB
10 XENB Inverted signal of ENB
11 PCD Precharge data signal
12 B Video signal (B)
13 R Video signal (R)
14 G Video signal (G)
15 VSS VSS for V and H drive
16 XPCG Inverted signal of PCG
17 PCG Precharge gate signal
18 CSH Right / left inverse control signal (H : Normal scan, L : Reverse scan)
19 XSTH Inverted signal of STH
20 STH H start signal
21 CKH2 H clock 2
22 CKH1 H clock 1
23 HVDD VDD for H drive
24 NC Leave this pin open
Block Diagram
Front View
24.NC 23.HVDD 22.CKH121.CKH220.STH 19.XSTH 18.CSH 17.PCG 16.XPCG 15.VSS 14.G 13.R 12.B 11.PCD 10.XENB 9.ENB 8.CSV 7.XSTV 6.STV 5.VVDD 4.CKV2 3.CKV1 https://www.wendangku.net/doc/308029369.html, 1.NC
Reverse Scan
Normal Scan
Package Dimension