SICK S3000 软件教程

Modify Safety Area With SICK

Software

使用SICK软件修改安全区域

Identify Device And Read Data

Identify Device And Read Data

?打开项目文件，右键Ethernet Communication,选择identify,弹出对话框。勾选需要操作的设备，开始识别。

?Open our document, click Ethernet Communication with right button, dialog box will open. Select devices which you need, start identifying.

Identify Device And Read Data

Identify Device And Read Data ?完成识别后，系统会提示是否读取设备组态信息。

?After finish identifying, system will mention if you want to read the configuration.

Identify Device And Read Data

?完成读取后，图标会变亮。?Relevent icons of scanner will be light.

Identify Device And Read Data

Identify Device And Read Data

?双击需要操作的Scanner图标,然后点击需要操作的区域，安全区域将会显示。

?Double click the scanner icon which you need, then click safety area which need to be operated, the area will be displayed on the main screen.

View And Modify Safety Area

View And Modify Safety Area

?如图，粉色区域为当前的安全区域。

?As the picture, the pink area is the current safety area.

?蓝色线条的轮廓为Scanner当前探测到的周边区域。?The blue surrounding contour is the area where the scanner is detecting.

?可以通过图标切换是否显示Scanner可检测到的周边轮廓。

?We can switch that the blue surrounding contour is displayed or not by the icon

?可以通过选择图标更改需要的安全区域。

?We can modify the area where we need after select the icon

View And Modify Safety Area

View And Modify Safety Area

?如图，红色线条的区域说明Scanner探测到有人进入安全区域。

?As the picture, the area with red line represents that the scanner is detecting someone staying at the safety area.

?当然，有时Scanner会在安全区域探测到不希望被探测到的物体。这时，就需要更改安全区域的设定。

?of course,sometimes scanners detect something that shouldn't be detected. At this time, the safety area should be modified.

下载安全区域数据Download Datas Of Safety area ?在进行下载操作前，必须确认好重新设定的安全区域!

?Before downloading datas, must confirm the resetted safety area!

?点击图标，进行下载。

?Click the icon , transfer configuration to the device.

Download Datas Of Safety area

?输入密码：SICKSAFE

?Input password:SICKSAFE

Download Datas Of Safety area

?在此处点击‘释放’,完成下载。?Click 'Release' to download.