TOSHIBA Photocoupler Photorelay
TLP4197G
PBX
Telecommunication
Modem ?FAX Cards, Modems In PC Measurement Instrumentation
The TOSHIBA TLP4197G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a SOP , which is suitable for surface mount assembly.
The TLP4197GA is suitable for replacement of mechanical relays in many applications which require space savings.
· 6 pin SOP (2.54SOP6): 2.1 mm high, 2.54 mm pitch · 1-form-B
· Peak off-state voltage: 350 V (min) · Trigger LED current: 3 mA (max) · On-state current: 120 mA (max) · On-state resistance: 25 ? (max) · Isolation voltage: 1500 Vrms (min)
Pin Configuration (top view)
Schematic
Unit: mm
JEDEC ― JEITA
―
TOSHIBA 11-7C1 Weight: 0.13 g (typ.)
6
4
1: ANODE 2: CATHODE
4: DRAIN D1 5: SOURCE
6: DRAIN D2
5
4
Maximum Ratings (Ta = 25°C)
Characteristics Symbol Rating Unit Forward current I F 50 mA Forward current derating (Ta > =25°C) D I F /°C
-0.5 mA/°C
Peak forward current (100 m s pulse, 100 pps) I FP 1 A Reverse voltage V R 5 V L E D
Junction temperature
T j 125 °C Off-state output terminal voltage
V OFF 350 V
A connection
120 B connection 120 On-state current C connection
I ON
240 mA
A connection -1.2
B connection -1.2 On-state current derating (Ta > =25°C)
C connection
D I ON /°C -2.4
mA/°C D e t e c t o r
Junction temperature T j 125 °C Operating temperature range T opr -40 to 85 °C Storage temperature range T stg
-55 to 125
°C Lead soldering temperature (10 s)
T sol 260 °C
Isolation voltage
(AC, 1 min, R.H.< =60%) (Note
1) BV S 1500 Vrms
Note 1: Device considered a two-terminal device: LED side pins shorted together, and DETECTOR side pins and 6
shorted together.
Recommended Operating Conditions
Characteristics Symbol Min Typ.
Max
Unit Supply voltage V DD
?
? 280
V
Forward current I F 5 ? 25 mA On-state current I ON ? ? 120
mA
Operating temperature
T opr
-20
? 65 °C
Circuit Connections
Individual Electrical Characteristics (Ta = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Forward voltage V F I F = 10 mA 1.0 1.15
1.3
V
Reverse current
I R
V R = 5 V
?
? 10 m A
L E D
Capacitance C T V = 0, f = 1 MHz ? 30 ? pF Off-state current
I OFF
V OFF = 350 V, I F = 5 mA
? ? 1 m A D e t e c -
t o r
Capacitance C OFF V = 0, f = 1 MHz, I F = 5 mA
?
? pF
Coupled Electrical Characteristics (Ta = 25°C)
項
目
記号 測定条件
最小
標準
最大
単位
Trigger LED current I FC I OFF = 10 m A ? 1 3 mA Return LED current
I FT
I ON = 120 mA 0.1
?
? mA
A connection
I ON = 120 mA ? 15 25 B connection I ON = 120 mA ? 8 14 On-state resistance
C connection
R ON
I ON = 240 mA
?
4
?
W
Isolation Characteristics (Ta = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Capacitance input to output C S V S = 0, f = 1 MHz
? 0.8 ? pF
Isolation resistance
R S
V S = 500 V, R.H.<=60% 5 ′ 1010 1014 ? W AC, 1 min
1500
?
?
AC, 1 s, in oil ? 3000 ?
Vrms
Isolation voltage
BV S DC, 1 min, in oil
? 3000 ? Vdc
Switching Characteristics (Ta = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Turn-on time t ON ? ? 1 ms Turn-off time
t OFF
R L = 200 W
(Note 2)
V DD = 20 V, I F = 5 mA
?
? 3 ms
Note 2: Switching time test circuit
V DD
V OUT
Ambient temperature Ta (°C) I F – Ta
A l l o w a b l e f o r w a r d c u r r e n t I F (m A )
Ambient temperature Ta (°C)
I ON – Ta
O n -s t a t e c u r r e n t I O N (m A )
Forward voltage V F (V)
I F – V F
F o r w a r d c u r r e n t I F (m A )
0-20
280120
100 80 60 40 20 0 240
2001601208040
0.6 0.8 1 1.2 1.6 1.8
1.4
I ON – V ON
O n -s t a t e c u r r e n t I O N (m A )
On-state voltage V ON (V)
Ambient temperature Ta (°C)
R ON – Ta
O n -s t a t e r e s i s t a n c e R O N (W )
Ambient temperature Ta (°C)
I FC – Ta
T r i g g e r L E D c u r r e n t I F C (m A )
-20
60
20
40
80
100
120
100 80 60 40 20 0 --100
80 60 40 20 0 -20
Input current I F (mA)
t ON , t OFF – I F
S w i t c h i n g t i m e t O N , t O F F (m s )
Ambient temperature Ta (°C)
I OFF – Ta
O f f -s t a t e c u r r e n t I O F F (n A )
Ambient temperature Ta (°C)
t ON , t OFF – Ta
S w i t c h i n g t i m e t O N , t O F F (m s )
100
80 60 40 20 0 -20 1 100
30 50 10 3 5 0 20 60 100
40
80
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. · The products described in this document are subject to the foreign exchange and foreign trade laws.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice.
000707EBC
RESTRICTIONS ON PRODUCT USE