KPT/KPSE
KP-6/898
KPT/KPSE Miniature circular connectors
2
Subject to changes Contents Introduction (2)
Standard Data (3)
Series KPT (4)
Series KPSE (6)
Contact arrangements (9)
Wall mounting receptacles (13)
Cable connecting plugs (14)
Box mounting receptacles (15)
Thru-bulkhead receptacles (15)
Straight plugs (16)
Jam nut receptacles (17)
Right angle plugs (18)
Special versions
Connectors with grounding continuity (19)
Receptacles with straight solder pins (22)
Panel cutouts (24)
Dummy receptacle (25)
Protective caps (26)
Tools (27)
Assembly instructions (28)
Cross reference lists (29)
Product safety information (31)
Introduction
The miniature circular connectors series KPT and
KPSE from ITT Cannon are manufactured acc. to
MIL-C-26482 with three point bayonet coupling and
five-keyway polarization.They offer general purpose
solder connectors and high performance crimp
connectors. The broad product range provides the
most complete familiy of connectors conform to MIL-
C-26482, NFC 93422 HE 301 model, VG 95328 and
LN 29500 specifications.
The versatility of these connectors has been proven
by their usage in general as well as in high per-
formance environmental applications.
In addition to the basic series presented in this
catalogue, connectors for special applications are
available. They include corrosion resistant types,
filter connectors for electromagnetic compatability
and non-outgasing, radiation resistant versions.
All connectors conform to the above mentioned
specifications are fully intermateable and accept a
wide range of interchangeable accessories. Thereby
design modifications can be achieved more easily
and at lower cost with connectors of the KPT/KPSE
series.
3
KPT/KPSE
Miniature circular connectors
Technical Data
KPT
KPSE
Material and Finishes Shell Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416Insulator
Polychloroprene Polychloroprene Grommet and Seal Polychloroprene Polychloroprene Contacts Copper alloy, gold plated Copper alloy, gold plated
Mechanical Data Shell styles
00 – Wall mounting receptacle 07 – Jam nut receptacle
01 – Cable connecting plug 08 – Plug with 90° termination assemblies 02 – Box mounting receptacle B – Thru-bulkhead receptacle (KPT only)
06 – Straight plug Shell sizes
8 thru 24
Polarisation/Coupling five keyways/three point bayonet Service classes A – General duty
G – Gland seal for jacketed cable
B – General duty with strain relief J – Gland nut with strain relief for jacketed cable E – Grommet seal
E – Grommet seal
P – for potting
F – Grommet seal with strain relief
see also pages 5 and 8
Water tightness
Acc. to VG 95319 Part 2, Test No. 5.9.2
For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only Test pressure 0,2 bar overpressure Test duration 48 h Test temperature 25 ± 3°C The connector shall be free of moisture Operating temperature – 55 / 125°C
Durability min. 500 mating cycles Vibration
200 m/s 2 at 10 to 2000 Hz
Electrical Data Number of contacts 2 thru 61 3 thru 61Wire size AWG 16 thru 2412 thru 24Contact termination Solder Crimp Contact rating
Size AWG Rated current A Test current A Millivolt drop mV 207,57,5less than 5516
22,0
13,0
less than 50
Insulation resistance ⊕ 5000 MW Service rating
Test voltage Service class Vrms VDC With scoop proof connectors Sea level 115002100operating voltages
223003200acc. to MIL-C-26482 and 21336 m 1375535VG 96912 are (70 000 ft.)
2550770permitted
Operating voltage Service class VG 95328
MIL-C-26482
1140 VDC/100 VAC 850 VDC/600 VAC 2
165 VDC/115 VAC 1400 VDC/1000 VAC
Exception
Service rating between the central contact and the housing of the coaxial contact
Connectors are equipment which must not be separated or mated when used as per determination. As acc. to specification the connectors are suitable for an operating voltage of 50 V (see Product Safety Information).However, this is only valid when the connectors are free accessible during operation and consequently might be touchable. When the connectors will be operated with line voltage, ITT Cannon offers a solution, too. Please consult factory.
Operating voltage and connector usage
KPT/KPSE Miniature circular connectors
4
Subject to changes
KPT General purpose solder contact connectors q General purpose
q Solder termination
q Closed entry socket contacts
Series KPT from ITT Cannon offers general purpose connectors, qualified for use in military applications
but also widely used in industrial applications calling
for a circular connector with fixed contacts for solder termination.
The KPT series is MIL-C-26482 approved and is intermateable with all connectors acc. to the above
mentioned specifications.
5
KPT/KPSE
Miniature circular connectors
KPT 02 E 22 - 36 P W *
Series Prefix
KPT – ITT Cannon Prefix
Shell style
ITT Cannon designation
00 – wall mounting receptacle 01 – cable connecting plug
02 – box mounting receptacle (class E only), not with
contact arrangement 14A406 – straight plug
07 – jam nut receptacle (hermetic version also available)08 – 90° angle plug
B – thru-bulkhead receptacle (class E only)
Class
A –general duty with intermediate endbell
B –general duty with strain relief
(may be used for potting)
E –with a grommet seal, not for 02 and 3112 (MS Spec)
F –grommet seal with strain relief (MS Spec)
G –gland seal for jacketed cable
J –watertight gland seal with strain relief
for jacketed cable P –for potting (MS Spec)Shell sizes
8, 10, 12, 14, 16, 18, 20, 22 und 24Contact arrangement see page 9 – 11Contact type P –pin S –socket
Alternate insert position W, X, Y and Z (omit for normal)see page 12
Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07DZ – Endbell for shielding braids and shrink boots.Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the ITT Cannon ordering system. For other order references according to a specification, please consult the cross reference list on pages 29 – 30.
KPT General purpose solder contact connectors
How to order*
KPT/KPSE
Miniature circular connectors
6
Subject to changes
KPSE High performance crimp contact connectors
q High performance q Crimp termination
q Closed entry socket contacts
Series KPSE environmental, miniature circular, quick disconnect connectors are designed for the exacting requirements of today`s electronic industry.They are intermateable, intermountable and interchangeable with all connectors manufactured acc. to MIL-C-26482, LN 29500, VG 95328, NFC 93422 HE 301 and NFL 54125.
Connectors of ITT Cannon series KPSE have obtained the VDE Expertise No. 63761.
4Contact retaining clip
is completely encased in a tough plastic wafer to protect the clip from https://www.wendangku.net/doc/7411204594.html,plete moisture sealing
is achieved by combining four seals: shell, peripheral,interfacial and wire seals.
SHELL SEAL
is effected when the plug shell pushes against the sealing ring in the receptacle when the connectors are mated.
PERIPHERAL SEAL
around the edge of the pin insulator is designed so that mating the connector puts tension on the seal and greatly reduces compression set.
INTERFACIAL SEAL
is achieved by the insulator faces meeting when the plug and receptacle are mated.
WIRE SEAL
is accomplished by a multiple ripple design, exceeding the wire sealing requirements of MIL-C-26482.5Positive insert-to-shell mechanical retention with hard plastic wafer firmly locked into a groove in the shell, in addition to a strong adhesive bond between the insert and shell.
1Standard MIL-C-26482 or NFL 54 125 Hardware mates with any connector designed to MIL-C-26 482,LN 29500 or NF L 54 125 or NF C 93 422, HE 301model 2 Crimp, snap-in contacts
are designed to MIL-C-23216 and can be crimped with the standard M22520/1 crimp tool.CLOSED-ENTRY SOCKET CONTACTS
eliminate damage from abuse by test probes and help to correct any misaligned pins during engagement.CONTACT INSERTION
is accomplished from the rear of the connector. When the contact is fully inserted, the clip tines snap securely behind the contact shoulder.
CONTACT EXTRACTION
is accomplished with a front-inserted extraction tool.Pressing the tool plunger pushes the contact out through the rear of the connector.
3Monobloc insulator
does not leave any access to moisture and avoids
interfacial empty space.
7
KPT/KPSE
Miniature circular connectors
VG 95328 A 18 - 1 S N
Specification
Shell style
A –wall mouting receptacle with straight endbell
B –wall mounting receptacle with cable clamp
C –box mounting receptacle
D –jam nut receptacle
E –jam nut receptacle with cable clamp J –straight plug with adapter DN K –straight plug with cable clamp M–straight plug, version DZ N –straight plug
R –wall mounting receptacle, version DZ S –jam nut receptacle with adapter DN T –jam nut receptacle, version DZ Shell size
8, 10, 12, 14, 16, 18, 20, 22 und 24Contact arrangement see pages 9 – 11Contact type P –pin S –socket
Alternate insert position see page 12
How to order acc. to VG 95328
KPSE High performance crimp contact connectors
KPT/KPSE
Miniature circular connectors
8Subject to changes
KPSE 00 E 18 - 32 P X *
Series prefix
KPSE – ITT Cannon prefix MS – MIL-C-26482 prefix Shell style
ITT Cannon designation
00 – wall mounting receptacle 01 – cable connecting plug 02 – box mounting receptacle 06 – straight plug
07 – jam nut receptacle 08 – 90° angle plug
Class
A –general duty (not MS approved)
B –general duty with strain relief (not MS approved)E –grommet seal (MS specification)
F –grommet seal with strain relief (MS specification)
G –gland seal for jacketed cable
J –gland seal with strain relief for jacketed cable
(not MS approved)
P –for potting (MS specification)Shell style
8, 10, 12, 14, 16, 18, 20, 22 und 24Contact arrangement see pages 9 – 11Contact type P –pin S –socket
Alternate insert position
W, X, Y and Z (omit for normal), see page 12
Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07DZ – Endbell for shielding braids and shrink boots.Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the ITT Cannon ordering system. For other order references according to a specification, please consult the cross reference list on pages 29 – 30.
How to order
KPSE High performance crimp contact connectors
KPT/KPSE Miniature circular connectors
KPT/KPSE Miniature circular connectors
KPT/KPSE Miniature circular connectors
KPT/KPSE Miniature circular connectors
Alternate Insert Position
The diagram indicates alternate insert positions. The
six positions N, V, W, Y, Z differ in degree of rotation
for various sizes and arrangements. For the exact
degree of rotation, for the list of contact arrange-
ments and for alternate positions available, refer to
13
KPT/KPSE
Miniature circular connectors
Without termination assembly
KPT/KPSE KPT Shell ? A
L Q
K M R S T Z size*+0,03 -0,13max.Thread Type 2A ±0,25±0,15±0,15max.±0,15max.x 812,0021,67/16-28UNEF 13,511,615,121,03,0512,31015,0021,69/16-24UNEF 13,511,618,324,23,0512,31219,0521,611/16-24UNEF 13,511,620,626,63,0512,31422,2321,613/16-20UNEF 13,511,623,029,03,0512,31625,4021,615/16-20UNEF 13,511,624,631,33,0512,31828,5821,61- 1/16-18UNEF 13,511,627,033,73,0512,32031,7526,81- 3/16-18UNEF 16,514,2529,436,93,0510,82234,9326,81- 5/16-18UNEF 16,514,2531,840,13,0510,82438,10
26,81- 7/16-18UNEF 17,315,134,943,33,75
10,0
Type E Type P Mod. DN or F 185Shell B E L E B P D P L P D2L1L2size*max.max. max.min.max.-0,5max.±0,5x 814,232,515,38,336,915,635,012,21017,232,517,611,336,918,435,012,21220,432,521,614,236,923,735,012,21423,432,524,317,336,924,535,012,21626,632,527,620,536,929,837,014,51829,632,531,023,136,932,037,014,52032,834,534,326,342,236,142,015,82236,034,537,129,442,238,542,015,824
39,2
34,5
40,5
32,6
43,9
41,6
42,0
14,9
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
Type A Type B or F
Type E Type P M
od. DN or F 185
Typ A Typ B and F Shell B A D A L A V
B BF C
D BF G BF H BF L BF size*max.min.max.Thread Type 2A max.Thread min.min.max.max.x 815,08,538,01/2-28UNEF 14,06-326,02,919,345,11018,211,838,05/8-24UNEF 17,26-327,54,520,845,11221,215,038,03/4-20UNEF 20,46-3210,77,724,445,11424,617,938,07/8-20UNEF 23,66-3213,99,327,245,11627,721,138,0 1 -20UNEF 26,76-3215,512,428,748,21830,924,138,01-3/16-18UNEF 29,58-3219,615,635,348,22033,926,543,11-3/16-18UNEF 32,78-3219,615,635,350,02237,130,443,11-7/16-18UNEF 35,98-3223,618,839,950,02440,332,843,11-7/16-18UNEF
39,08-3225,2
20,143,250,0
Crimp
KPSE00/MS3120
Solder
KPT00/MS3110
Wall mounting receptacles
KPT00/MS3110 KPSE00/MS3120
KPT/KPSE
Miniature circular connectors
14Subject to changes
Without termination assembly
KPT/KPSE KPT
Shell ? A
K
L M Q
S ? Y Z size*+0,03 -0,13±0,25max.±0,15Thread Type 2A max.max.max.x 812,0013,521,511,67/16-28UNEF 18,521,012,31015,0013,521,511,69/16-24UNEF 23,024,212,31219,0513,521,511,611/16-24UNEF 29,026,612,31422,2313,521,511,613/16-20UNEF 29,529,012,31625,4013,521,511,615/16-20UNEF 32,031,312,31828,5813,521,511,61- 1/16-18UNEF 35,033,712,32031,7516,526,814,251- 3/16-18UNEF 38,536,910,82234,9316,526,814,251- 5/16-18UNEF 42,040,110,82438,10
17,526,815,11- 7/16-18UNEF 46,043,3
10,0
Type E Type P Mod. DN or F 185Shell B E L E B P D P L P D2L1L2size*max.max. max.min.max.-0,5max.±0,5x 814,232,515,38,336,915,635,012,21017,232,517,611,336,918,435,012,21220,432,521,614,236,923,735,012,21423,432,524,317,336,924,535,012,21626,632,527,620,536,929,837,014,51829,632,531,023,136,932,037,014,52032,834,534,326,342,236,142,015,82236,034,537,129,442,238,542,015,824
39,2
34,5
40,5
32,6
43,9
41,6
42,0
14,9
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Type A Type B or F
Type E Type P M
od. DN or F 185
With termination assemblies
Typ A Type B and F Shell B A D A L A V
B BF C
D BF G BF H BF L BF size*max.min.max.Thread Type 2A max.Thread min.min.max.max.x 815,08,538,01/2-28UNEF 14,06-326,02,919,346,01018,211,838,05/8-24UNEF 17,26-327,54,520,846,01221,215,038,03/4-20UNEF 20,46-3210,77,724,446,01424,617,938,07/8-20UNEF 23,66-3213,99,327,246,01627,721,138,0 1 -20UNEF 26,76-3215,512,428,749,01830,924,138,01-3/16-18UNEF 29,58-3219,615,635,349,02033,926,543,11-3/16-18UNEF 32,78-3219,615,635,351,12237,130,443,11-7/16-18UNEF 35,98-3223,618,839,951,12440,332,843,11-7/16-18UNEF
39,08-3225,2
20,143,251,1
Cable connecting plugs
KPT01/MS3111 KPSE01/MS3121
Solder
KPT01/MS3111
Crimp
KPSE01/MS3121
15
KPT/KPSE
Miniature circular connectors
Without termination assemblies
KPT/KPSE KPT
Shell
? A
L
N K M R S T Z size*+0,03 -0,13max.max.±0,25±0,15±0,15max.±0,15max.x 812,0021,111,113,511,615,121,03,0512,31015,0021,114,313,511,618,324,23,0512,31219,0521,117,513,511,620,626,63,0512,31422,2321,120,613,511,623,029,03,0512,31625,4021,123,813,511,624,631,33,0512,31828,5821,127,013,511,627,033,73,0512,32031,7522,730,216,514,2529,436,93,0510,82234,9322,733,416,514,2531,840,13,0510,82438,10
22,736,517,315,134,943,33,75
10,0
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Receptacle assembly
Shell ? A
K L M T R S X size*+0,03 -0,13±0,5max.±0,25max.±0,15max.±0,15x 812,0016,128,614,56,015,121,03,051015,0016,128,614,56,018,324,23,051219,0516,128,614,56,020,626,63,051422,2316,128,614,56,023,029,03,051625,4016,128,614,56,024,631,33,051828,5816,128,614,56,027,033,73,052031,7520,131,917,79,229,436,93,052234,9320,131,917,79,231,840,13,0524
38,10
20,1
31,9
17,7
8,0
34,9
43,3
3,75
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Box mounting receptacles
KPT02/MS3112 KPSE02/MS3122
KPTB/MS3119
Crimp
KPSE02/MS3122
Solder
KPT02/MS3112
Thru-bulkhead receptacles
KPTB/MS3119
KPT/KPSE
Miniature circular connectors
16Subject to changes
Without termination assemblies
KPT/KPSE KPT
Shell G
J L Q Thread Z
size*max.±0,15max.Thread Type 2A max.x 819,89,121,47/16-28UNEF 16,31023,69,121,49/16-24UNEF 16,31226,59,121,411/16-24UNEF 16,31430,19,121,413/16-20UNEF 16,31633,29,121,415/16-20UNEF 16,31835,49,121,41- 1/16-18UNEF 16,32039,010,725,11- 3/16-18UNEF 15,02242,110,725,11- 5/16-18UNEF 15,02445,2
10,725,1
1- 7/16-18UNEF
15,0
With termination assemblies
Type A Typ B and F Shell B A D A L A V
B BF C
D BF G BF H BF L BF size*max.min.max.Thread Type 2A max.Thread min.min.max.max.x 815,08,542,01/2-28UNEF 14,06-326,02,919,346,01018,211,842,05/8-24UNEF 17,26-327,54,520,846,01221,215,042,03/4-20UNEF 20,46-3210,77,724,446,01424,617,942,07/8-20UNEF 23,66-3213,99,327,246,01627,721,142,0 1 -20UNEF 26,76-3215,512,428,749,01830,924,142,01-3/16-18UNEF 29,58-3219,615,635,349,02033,926,545,01-3/16-18UNEF 32,78-3219,615,635,349,02237,130,445,01-7/16-18UNEF 35,98-3223,618,839,949,02440,332,845,0
1-7/16-18UNEF
39,0
8-3225,220,143,2
49,0
Type A
Type B or F
Type E Type P M
od. DN or F 185
Type E Type P Mod. DN or F 185Shell B E L E B P D P L P D2L1L2size*max.max. max.min.max.-0,5max.±0,5x 814,232,515,38,336,915,635,012,21017,232,517,611,336,918,435,012,21220,432,521,614,236,923,735,012,21423,432,524,317,336,924,535,012,21626,632,527,620,536,929,837,014,51829,632,531,023,136,932,037,014,52032,834,534,326,342,236,142,015,82236,034,537,129,442,238,542,015,824
39,2
34,5
40,5
32,6
43,9
41,6
42,0
14,9
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Straight plugs
KPT06/MS3116 KPSE06/MS3126
Solder
KPT06/MS3116
Crimp
KPSE06/MS3126
17
KPT/KPSE
Miniature circular connectors
Without termination assemblies
KPT/KPSE KPT
Shell A
F H K M R
S T Panel thickness ? Y Z size*+0,03 -0,13±0,15±0,15±0,25±0,15Thread Type 2A ±0,5min.max.max.max.x 812,013,319,03,217,79/16-24UNEF 24,01,63,528,07,91015,016,522,23,217,711/16-24UNEF 27,01,63,531,07,91219,0520,627,03,217,77/8-20UNEF 32,01,63,536,07,91422,2323,830,23,217,7 1 -20UNEF 35,01,63,539,07,91625,4026,933,33,217,71- 1/8-18UNEF 38,51,63,542,07,91828,5830,136,53,217,71- 1/4-18UNEF 41,51,63,545,07,92031,7533,339,74,022,51- 3/8-18UNEF 46,01,66,550,04,72234,9336,542,94,022,51- 1/2-18UNEF 49,51,66,555,04,724
38,10
39,6
46,0
4,0
23,3
1- 5/8-18UNEF
52,5
1,66,5
57,0
3,8
Jam nut receptacle
KPT07/MS3114 KPSE07/MS3124
Type B and F Type E Type DN Shell B BF D BF G BF H BF L BF B E L E L 1L 2D 2size*max.min.min.max.max.max.max. max.±0,5max.x 818,26,02,919,344,918,233,543,012,215,61021,57,54,520,844,921,533,543,012,218,41224,610,77,724,244,924,633,543,012,223,71427,813,99,327,244,927,833,543,012,224,71631,015,512,428,748,431,033,545,514,529,81834,119,615,635,348,434,133,545,514,532,02038,119,615,635,350,338,139,052,615,836,12241,323,618,839,850,341,339,052,615,828,524
44,5
25,220,143,2
50,3
44,5
39,0
51,614,941,6
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
T ype B or F Type E
Modification DN or F 185
Solder
KPT07/MS3114 Type A
Crimp
KPSE07/MS3124
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
KPT/KPSE
Miniature circular connectors
18Subject to changes
Without termination assemblies
KPT/KPSE KPT Shell G J L Q
Z size*
max.
±
0,15max.Thread Type 2A max.x 819,89,121,47/16-28UNEF 16,31023,69,121,49/16-24UNEF 16,31226,59,121,411/16-24UNEF 16,31430,19,121,413/16-20UNEF 16,31633,29,121,415/16-20UNEF 16,31835,49,121,41- 1/16-18UNEF 16,32039,010,725,11- 3/16-18UNEF 15,02242,110,725,11- 5/16-18UNEF 15,02445,2
10,725,11- 7/16-18UNEF
15,0
Typ A or E Type B or F
Typ A and E Type B and F Shell B AE L AE D AE V
B BF D BF L BF size*max.max.max.Thread Type 2A max.max.max.x 815,636,120,91/2-28UNEF 15,631,436,11018,938,321,75/8-24UNEF 18,932,238,31221,240,923,33/4-20UNEF 21,235,440,91424,841,624,97/8-20UNEF 24,838,641,61627,742,526,5 1 -20UNEF 27,740,242,51831,444,728,11-3/16-18UNEF 31,441,844,72034,748,329,61-3/16-18UNEF 34,743,448,32236,952,131,71-7/16-18UNEF 36,947,952,124
41,1
52,133,61-7/16-18UNEF
41,1
49,952,1
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Right angle plug, 90°
KPT08 KPSE08
Solder KPT08Crimp KPSE08
* See page 5, 7 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
19
KPT/KPSE
Miniature circular connectors
Shell A
B C D E K L M R S ?T size*+0,03 -0,13min.+0,5max.1,00±
0,25
max.±0,15±0,15max.±0,15x 812,006,616,013,315,013,552,011,615,121,03,051015,009,218,016,115,013,552,011,618,324,23,051219,0512,222,020,017,013,552,011,620,626,63,051422,2315,225,022,218,013,553,011,623,029,03,051625,4018,328,026,218,013,553,011,624,631,33,051828,5820,032,028,518,013,553,011,627,033,73,052031,7523,034,032,518,016,558,014,2529,436,93,052234,9326,038,034,818,016,558,014,2531,740,13,052438,1028,841,037,918,017,358,015,134,943,33,75
* See pages 5 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
These connectors are designed to ensure electrical continuity
q at the cable shielding level
(to protect it against radio frequency intererences)q at the grounding level
(if it is connected to the shielding).
The plugs are manufactured with grounding fingers soldered to the front face of the shell. They make contact with the inner side of the receptacle shell.Plug and receptacle feature a special endbell which supports the cable shielding. The connectors are in accordance with the VG 95328 specification.
Receptacle with grounding continuity (for shielded cable)
KPT/KPSE 0E ... DZ
Special versions with grounding continuity
KPT/KPSE
Miniature circular connectors
20Subject to changes
Shell A
B
C
D
E K L M S ? Y size*+0,03 -0,13min.+0,50max.±1,0±0,25max.±0,15max.max.x 812,006,616,013,315,013,552,011,618,521,01015,009,218,016,115,013,552,011,623,024,21219,0512,222,020,017,013,552,011,629,026,61422,2315,225,022,218,013,553,011,629,529,01625,4018,328,026,218,013,553,011,632,031,31828,5820,032,028,518,013,553,011,635,033,72031,7523,034,032,518,016,558,014,2538,536,92234,9326,038,034,818,016,558,014,2542,040,12438,1028,841,037,918,017,558,015,1046,043,3
* See pages 5 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Shell A B C D E L S size*min.+0,50max.max.±1,0max.±0,2x 86,616,019,120,015,048,017,0109,218,022,015,015,048,019,01212,222,026,226,017,048,023,01415,225,029,430,018,049,026,01618,328,032,833,018,049,029,01820,032,035,436,018,049,033,02023,034,039,040,018,053,035,02226,038,042,143,018,053,039,02428,841,045,246,018,053,042,0
* See pages 5 and 8 for ordering number information x in series KPSE only contact arrangements 8-3A and 8-33 available
Cable connecting plug with grounding continuity (for shielding cable)
KPT/KPSE 1E ... DZ
Straight plug with grounding continuity
KPT/KPSE6E.DZ