Item grade 1
appearan ce MAJ
NO.standard 1235+/-22138.5+/-238~10Nm 4
M14*2.0
5678910
edition
visual MAJ
revision record
revise content
reviser
revision date
4
packing check items like packing, label, quantity, type and so on(first QC check every
carton, and confirm if there is the name of packer or not. Packer can seal up
the carton until all the data is confirmed to be correct ).
MAJ torque wrench MAJ thread ring gauge
MAJ
MAJ
3dimension
inspection tool defect grade remark
height gauge MAJ select 5pcs samples randomly from every batch.
Sunlight:1000+/-200 lux,distance from eye:20~30cm,view angle:45~75°.
calliper Inspection Norm
basis/method 1.appearance :Neither burr, any damages or distortion nor dirty and oily
surface. Smooth rotation of the wheel after assembling the cap. Tighten the patch protective sleeve.
drawing
visual 2
function 1.dynamic test: no distortion and breakage if bearing 70kg.
2.wheel rotation :confirm if the wheel rotates smootly.
3.lock torsion :8~10Nm
carry out dynamic test according to EN12531, manual operation and torque wrench.
Standard Inspection Procedure Name:5340RNP190S70-M14*22
Version:A 0
fasten down the protective cap
smooth surface