自动化专业英语词汇表
摘自《自动化专业英语》,武汉理工大学出版社,戴文进、章卫国主编
acceleration transducer 加速度传感器acceptance testing 验收测试
accessibility 可及性
accumulated error 累积误差
AC-DC-AC frequency converter
交-直-交变频器
AC (alternating current) electric drive
交流电子传动
active attitude stabilization 主动姿态稳定actuator 驱动器,执行机构
adaline 线性适应元
adaptation layer 适应层
adaptive telemeter system 适应遥测系统adjoint operator 伴随算子
admissible error 容许误差
aggregation matrix 集结矩阵
AHP (analytic hierarchy process) 层次分析法amplifying element 放大环节
analog-digital conversion 模数转换annunciator 信号器
antenna pointing control 天线指向控制
anti-integral windup 抗积分饱卷
aperiodic decomposition 非周期分解
a posteriori estimate 后验估计
approximate reasoning 近似推理
a priori estimate 先验估计
articulated robot 关节型机器人
assignment problem 配置问题,分配问题associative memory model 联想记忆模型associatron 联想机
asymptotic stability 渐进稳定性
attained pose drift 实际位姿漂移
attitude acquisition 姿态捕获
AOCS (attritude and orbit control system)
姿态轨道控制系统
attitude angular velocity 姿态角速度
attitude disturbance 姿态扰动attitude maneuver 姿态机动
attractor 吸引子
augment ability 可扩充性
augmented system 增广系统
automatic manual station 自动-手动操作器automaton 自动机
autonomous system 自治系统
backlash characteristics 间隙特性
base coordinate system 基座坐标系Bayes classifier 贝叶斯分类器
bearing alignment 方位对准
bellows pressure gauge 波纹管压力表benefit-cost analysis 收益成本分析bilinear system 双线性系统biocybernetics 生物控制论
biological feedback system 生物反馈系统black box testing approach 黑箱测试法blind search 盲目搜索
block diagonalization 块对角化
Boltzman machine 玻耳兹曼机
bottom-up development 自下而上开发boundary value analysis 边界值分析brainstorming method 头脑风暴法breadth-first search 广度优先搜索butterfly valve 蝶阀
CAE (computer aided engineering)
计算机辅助工程
CAM (computer aided manufacturing)
计算机辅助制造
Camflex valve 偏心旋转阀
canonical state variable 规范化状态变量capacitive displacement transducer
电容式位移传感器
capsule pressure gauge 膜盒压力表CARD 计算机辅助研究开发
Cartesian robot 直角坐标型机器人cascade compensation 串联补偿catastrophe theory 突变论
centrality 集中性
chained aggregation 链式集结
chaos 混沌
characteristic locus 特征轨迹
chemical propulsion 化学推进
calrity 清晰性
classical information pattern 经典信息模式classifier 分类器
clinical control system 临床控制系统
closed loop pole 闭环极点
closed loop transfer function 闭环传递函数cluster analysis 聚类分析
coarse-fine control 粗-精控制
cobweb model 蛛网模型
coefficient matrix 系数矩阵
cognitive science 认知科学
cognitron 认知机
coherent system 单调关联系统
combination decision 组合决策combinatorial explosion 组合爆炸
combined pressure and vacuum gauge
压力真空表
command pose 指令位姿
companion matrix 相伴矩阵
compartmental model 房室模型
compatibility 相容性,兼容性
compensating network 补偿网络compensation 补偿,矫正
compliance 柔顺,顺应
composite control 组合控制
computable general equilibrium model
可计算一般均衡模型
conditionally instability 条件不稳定性configuration 组态
connectionism 连接机制
connectivity 连接性
conservative system 守恒系统
consistency 一致性
constraint condition 约束条件
consumption function 消费函数
context-free grammar 上下文无关语法continuous discrete event hybrid system sim ulation 连续离散事件混合系统仿真
continuous duty 连续工作制
control accuracy 控制精度
control cabinet 控制柜controllability index 可控指数
controllable canonical form 可控规范型[control] plant 控制对象,被控对象
controlling instrument 控制仪表
control moment gyro 控制力矩陀螺
control panel 控制屏,控制盘
control synchro 控制[式]自整角机
control system synthesis 控制系统综合control time horizon 控制时程
cooperative game 合作对策
coordinability condition 可协调条件coordination strategy 协调策略
coordinator 协调器
corner frequency 转折频率
costate variable 共态变量
cost-effectiveness analysis 费用效益分析coupling of orbit and attitude 轨道和姿态耦合critical damping 临界阻尼
critical stability 临界稳定性
cross-over frequency 穿越频率,交越频率current source inverter 电流[源]型逆变器
cut-off frequency 截止频率
cybernetics 控制论
cyclic remote control 循环遥控
cylindrical robot 圆柱坐标型机器人
damped oscillation 阻尼振荡
damper 阻尼器
damping ratio 阻尼比
data acquisition 数据采集
data encryption 数据加密
data preprocessing 数据预处理
data processor 数据处理器
DC generator-motor set drive
直流发电机-电动机组传动
D controller 微分控制器
decentrality 分散性
decentralized stochastic control 分散随机控制decision space 决策空间
decision support system 决策支持系统decomposition-aggregation approach
分解集结法
decoupling parameter 解耦参数
deductive-inductive hybrid modeling method 演绎与归纳混合建模法
delayed telemetry 延时遥测
derivation tree 导出树
derivative feedback 微分反馈
describing function 描述函数
desired value 希望值
despinner 消旋体
destination 目的站
detector 检出器
deterministic automaton 确定性自动机deviation 偏差
deviation alarm 偏差报警器
DFD 数据流图
diagnostic model 诊断模型
diagonally dominant matrix 对角主导矩阵diaphragm pressure gauge 膜片压力表difference equation model 差分方程模型differential dynamical system 微分动力学系统differential game 微分对策
differential pressure level meter 差压液位计differential pressure transmitter 差压变送器differential transformer displacement transdu cer 差动变压器式位移传感器
differentiation element 微分环节
digital filer 数字滤波器
digital signal processing 数字信号处理digitization 数字化
digitizer 数字化仪
dimension transducer 尺度传感器
direct coordination 直接协调
disaggregation 解裂
discoordination 失协调
discrete event dynamic system
离散事件动态系统
discrete system simulation language
离散系统仿真语言
discriminant function 判别函数
displacement vibration amplitude transducer 位移振幅传感器
dissipative structure 耗散结构distributed parameter control system
分布参数控制系统
distrubance 扰动
disturbance compensation 扰动补偿diversity 多样性
divisibility 可分性
domain knowledge 领域知识
dominant pole 主导极点
dose-response model 剂量反应模型
dual modulation telemetering system
双重调制遥测系统
dual principle 对偶原理
dual spin stabilization 双自旋稳定
duty ratio 负载比
dynamic braking 能耗制动
dynamic characteristics 动态特性
dynamic deviation 动态偏差
dynamic error coefficient 动态误差系数dynamic exactness 动它吻合性
dynamic input-output model
动态投入产出模型
econometric model 计量经济模型economic cybernetics 经济控制论economic effectiveness 经济效益economic evaluation 经济评价
economic index 经济指数
economic indicator 经济指标
eddy current thickness meter 电涡流厚度计effectiveness 有效性
effectiveness theory 效益理论
elasticity of demand 需求弹性
electric actuator 电动执行机构
electric conductance levelmeter 电导液位计electric drive control gear 电动传动控制设备electric hydraulic converter 电-液转换器electric pneumatic converter 电-气转换器electrohydraulic servo vale 电液伺服阀electromagnetic flow transducer
电磁流量传感器
electronic batching scale 电子配料秤electronic belt conveyor scale 电子皮带秤electronic hopper scale 电子料斗秤
elevation 仰角
emergency stop 异常停止
empirical distribution 经验分布endogenous variable 内生变量
equilibrium growth 均衡增长
equilibrium point 平衡点
equivalence partitioning 等价类划分ergonomics 工效学
error 误差
error-correction parsing 纠错剖析
estimate 估计量
estimation theory 估计理论
evaluation technique 评价技术
event chain 事件链
evolutionary system 进化系统
exogenous variable 外生变量
expected characteristics 希望特性
external disturbance 外扰
fact base 事实
failure diagnosis 故障诊断
fast mode 快变模态
feasibility study 可行性研究
feasible coordination 可行协调
feasible region 可行域
feature detection 特征检测
feature extraction 特征抽取
feedback compensation 反馈补偿feedforward path 前馈通路
field bus 现场总线
finite automaton 有限自动机
FIP (factory information protocol)
工厂信息协议
first order predicate logic 一阶谓词逻辑fixed sequence manipulator 固定顺序机械手fixed set point control 定值控制
FMS (flexible manufacturing system)
柔性制造系统
flow sensor/transducer 流量传感器
flow transmitter 流量变送器
fluctuation 涨落
forced oscillation 强迫振荡
formal language theory 形式语言理论formal neuron 形式神经元
forward path 正向通路
forward reasoning 正向推理
fractal 分形体,分维体
frequency converter 变频器
frequency domain model reduction method 频域模型降阶法
frequency response 频域响应
full order observer 全阶观测器
functional decomposition 功能分解
FES (functional electrical stimulation)
功能电刺激
functional simularity 功能相似
fuzzy logic 模糊逻辑
game tree 对策树
gate valve 闸阀
general equilibrium theory 一般均衡理论generalized least squares estimation
广义最小二乘估计
generation function 生成函数
geomagnetic torque 地磁力矩
geometric similarity 几何相似
gimbaled wheel 框架轮
global asymptotic stability 全局渐进稳定性global optimum 全局最优
globe valve 球形阀
goal coordination method 目标协调法grammatical inference 文法推断
graphic search 图搜索
gravity gradient torque 重力梯度力矩
group technology 成组技术
guidance system 制导系统
gyro drift rate 陀螺漂移率
gyrostat 陀螺体
Hall displacement transducer
霍尔式位移传感器
hardware-in-the-loop simulation 半实物仿真harmonious deviation 和谐偏差harmonious strategy 和谐策略
heuristic inference 启发式推理
hidden oscillation 隐蔽振荡
hierarchical chart 层次结构图
hierarchical planning 递阶规划
hierarchical control 递阶控制
homeostasis 内稳态
homomorphic model 同态系统
horizontal decomposition 横向分解hormonal control 内分泌控制
hydraulic step motor 液压步进马达hypercycle theory 超循环理论
I controller 积分控制器
identifiability 可辨识性
IDSS (intelligent decision support system) 智能决策支持系统
image recognition 图像识别
impulse 冲量
impulse function 冲击函数,脉冲函数inching 点动
incompatibility principle 不相容原理incremental motion control 增量运动控制index of merit 品质因数
inductive force transducer 电感式位移传感器inductive modeling method 归纳建模法industrial automation 工业自动化
inertial attitude sensor 惯性姿态敏感器inertial coordinate system 惯性坐标系inertial wheel 惯性轮
inference engine 推理机
infinite dimensional system 无穷维系统information acquisition 信息采集
infrared gas analyzer 红外线气体分析器inherent nonlinearity 固有非线性
inherent regulation 固有调节
initial deviation 初始偏差
initiator 发起站
injection attitude 入轨姿势
input-output model 投入产出模型
instability 不稳定性
instruction level language 指令级语言integral of absolute value of error criterion 绝对误差积分准则
integral of squared error criterion
平方误差积分准则integral performance criterion 积分性能准则integration instrument 积算仪器
integrity 整体性
intelligent terminal 智能终端
interacted system 互联系统,关联系统interactive prediction approach
互联预估法,关联预估法
interconnection 互联
intermittent duty 断续工作制
internal disturbance 内扰
ISM (interpretive structure modeling)
解释结构建模法
invariant embedding principle 不变嵌入原理inventory theory 库伦论
inverse Nyquist diagram 逆奈奎斯特图
inverter 逆变器
investment decision 投资决策
isomorphic model 同构模型
iterative coordination 迭代协调
jet propulsion 喷气推进
job-lot control 分批控制
joint 关节
Kalman-Bucy filer 卡尔曼-布西滤波器knowledge accomodation 知识顺应knowledge acquisition 知识获取
knowledge assimilation 知识同化
KBMS (knowledge base management system) 知识库管理系统
knowledge representation 知识表达
ladder diagram 梯形图
lag-lead compensation 滞后超前补偿Lagrange duality 拉格朗日对偶性
Laplace transform 拉普拉斯变换
large scale system 大系统
lateral inhibition network 侧抑制网络
least cost input 最小成本投入
least squares criterion 最小二乘准则
level switch 物位开关
libration damping 天平动阻尼
limit cycle 极限环
linearization technique 线性化方法
linear motion electric drive 直线运动电气传动
linear motion valve 直行程阀
linear programming 线性规划
LQR (linear quadratic regulator problem)
线性二次调节器问题
load cell 称重传感器
local asymptotic stability 局部渐近稳定性local optimum 局部最优
log magnitude-phase diagram 对数幅相图long term memory 长期记忆
lumped parameter model 集总参数模型Lyapunov theorem of asymptotic stability 李雅普诺夫渐近稳定性定理
macro-economic system 宏观经济系统magnetic dumping 磁卸载
magnetoelastic weighing cell
磁致弹性称重传感器
magnitude-frequency characteristic 幅频特性magnitude margin 幅值裕度
magnitude scale factor 幅值比例尺manipulator 机械手
man-machine coordination 人机协调
manual station 手动操作器
MAP (manufacturing automation protocol) 制造自动化协议
marginal effectiveness 边际效益
Mason's gain formula 梅森增益公式
master station 主站
matching criterion 匹配准则
maximum likelihood estimation 最大似然估计maximum overshoot 最大超调量
maximum principle 极大值原理
mean-square error criterion 均方误差准则mechanism model 机理模型
meta-knowledge 元知识
metallurgical automation 冶金自动化minimal realization 最小实现
minimum phase system 最小相位系统minimum variance estimation 最小方差估计minor loop 副回路
missile-target relative movement simulator 弹体-目标相对运动仿真器
modal aggregation 模态集结modal transformation 模态变换
MB (model base) 模型库
model confidence 模型置信度
model fidelity 模型逼真度
model reference adaptive control system
模型参考适应控制系统
model verification 模型验证
modularization 模块化
MEC (most economic control) 最经济控制motion space 可动空间
MTBF (mean time between failures)
平均故障间隔时间
MTTF (mean time to failures) 平均无故障时间multi-attributive utility function
多属性效用函数
multicriteria 多重判据
multilevel hierarchical structure 多级递阶结构multiloop control 多回路控制
multi-objective decision 多目标决策multistate logic 多态逻辑
multistratum hierarchical control
多段递阶控制
multivariable control system 多变量控制系统myoelectric control 肌电控制
Nash optimality 纳什最优性
natural language generation 自然语言生成nearest-neighbor 最近邻
necessity measure 必然性侧度
negative feedback 负反馈
neural assembly 神经集合
neural network computer 神经网络计算机Nichols chart 尼科尔斯图
noetic science 思维科学
noncoherent system 非单调关联系统noncooperative game 非合作博弈nonequilibrium state 非平衡态
nonlinear element 非线性环节
nonmonotonic logic 非单调逻辑nonparametric training 非参数训练nonreversible electric drive 不可逆电气传动nonsingular perturbation 非奇异摄动
non-stationary random process
非平稳随机过程
nuclear radiation levelmeter 核辐射物位计nutation sensor 章动敏感器
Nyquist stability criterion 奈奎斯特稳定判据objective function 目标函数
observability index 可观测指数
observable canonical form 可观测规范型on-line assistance 在线帮助
on-off control 通断控制
open loop pole 开环极点
operational research model 运筹学模型optic fiber tachometer 光纤式转速表optimal trajectory 最优轨迹
optimization technique 最优化技术
orbital rendezvous 轨道交会
orbit gyrocompass 轨道陀螺罗盘
orbit perturbation 轨道摄动
order parameter 序参数
orientation control 定向控制
originator 始发站
oscillating period 振荡周期
output prediction method 输出预估法
oval wheel flowmeter 椭圆齿轮流量计overall design 总体设计
overdamping 过阻尼
overlapping decomposition 交叠分解
Pade approximation 帕德近似
Pareto optimality 帕雷托最优性
passive attitude stabilization 被动姿态稳定path repeatability 路径可重复性
pattern primitive 模式基元
PR (pattern recognition) 模式识别
P control 比例控制器
peak time 峰值时间
penalty function method 罚函数法perceptron 感知器
periodic duty 周期工作制
perturbation theory 摄动理论
pessimistic value 悲观值
phase locus 相轨迹
phase trajectory 相轨迹
photoelectric tachometric transducer 光电式转速传感器
phase lead 相位超前
phrase-structure grammar 短句结构文法physical symbol system 物理符号系统piezoelectric force transducer 压电式力传感器playback robot 示教再现式机器人
PLC (programmable logic controller)
可编程序逻辑控制器
plug braking 反接制动
plug valve 旋塞阀
pneumatic actuator 气动执行机构
point-to-point control 点位控制
polar robot 极坐标型机器人
pole assignment 极点配置
pole-zero cancellation 零极点相消
polynomial input 多项式输入
portfolio theory 投资搭配理论
pose overshoot 位姿过调量
position measuring instrument 位置测量仪posentiometric displacement transducer
电位器式位移传感器
positive feedback 正反馈
power system automation 电力系统自动化predicate logic 谓词逻辑
pressure gauge with electric contact
电接点压力表
pressure transmitter 压力变送器
price coordination 价格协调
primal coordination 主协调
primary frequency zone 主频区
PCA (principal component analysis)
主成分分析法
principle of turnpike 大道原理
priority 优先级
process-oriented simulation 面向过程的仿真production budget 生产预算
production rule 产生式规则
profit forecast 利润预测
PERT (program evaluation and review techniq ue) 计划评审技术
program set station 程序设定操作器
proportional control 比例控制
proportional plus derivative controller
比例微分控制器
protocol engineering 协议工程
prototype 原型
pseudo random sequence 伪随机序列pseudo-rate-increment control
伪速率增量控制
pulse duration 脉冲持续时间
pulse frequency modulation control system 脉冲调频控制系统
pulse width modulation control system
脉冲调宽控制系统
PWM inverter 脉宽调制逆变器
pushdown automaton 下推自动机
QC (quality control) 质量管理
quadratic performance index 二次型性能指标qualitative physical model 定性物理模型quantized noise 量化噪声
quasilinear characteristics 准线性特性queuing theory 排队论
radio frequency sensor 射频敏感器
ramp function 斜坡函数
random disturbance 随机扰动
random process 随机过程
rate integrating gyro 速率积分陀螺
ratio station 比值操作器
reachability 可达性
reaction wheel control 反作用轮控制realizability 可实现性,能实现性
real time telemetry 实时遥测
receptive field 感受野
rectangular robot 直角坐标型机器人
rectifier 整流器
recursive estimation 递推估计
reduced order observer 降阶观测器redundant information 冗余信息
reentry control 再入控制
regenerative braking 回馈制动,再生制动regional planning model 区域规划模型regulating device 调节装载
regulation 调节relational algebra 关系代数
relay characteristic 继电器特性
remote manipulator 遥控操作器
remote regulating 遥调
remote set point adjuster 远程设定点调整器rendezvous and docking 交会和对接reproducibility 再现性
resistance thermometer sensor 热电阻resolution principle 归结原理
resource allocation 资源分配
response curve 响应曲线
return difference matrix 回差矩阵
return ratio matrix 回比矩阵
reverberation 回响
reversible electric drive 可逆电气传动revolute robot 关节型机器人
revolution speed transducer 转速传感器rewriting rule 重写规则
rigid spacecraft dynamics 刚性航天动力学risk decision 风险分析
robotics 机器人学
robot programming language 机器人编程语言robust control 鲁棒控制
robustness 鲁棒性
roll gap measuring instrument 辊缝测量仪root locus 根轨迹
roots flowmeter 腰轮流量计
rotameter 浮子流量计,转子流量计
rotary eccentric plug valve 偏心旋转阀
rotary motion valve 角行程阀
rotating transformer 旋转变压器
Routh approximation method 劳思近似判据routing problem 路径问题
sampled-data control system 采样控制系统sampling control system 采样控制系统saturation characteristics 饱和特性
scalar Lyapunov function 标量李雅普诺夫函数SCARA (selective compliance assembly robo t arm) 平面关节型机器人
scenario analysis method 情景分析法
scene analysis 物景分析
s-domain s域
self-operated controller 自力式控制器
self-organizing system 自组织系统
self-reproducing system 自繁殖系统
self-tuning control 自校正控制
semantic network 语义网络
semi-physical simulation 半实物仿真sensing element 敏感元件
sensitivity analysis 灵敏度分析
sensory control 感觉控制
sequential decomposition 顺序分解sequential least squares estimation
序贯最小二乘估计
servo control 伺服控制,随动控制servomotor 伺服马达
settling time 过渡时间
sextant 六分仪
short term planning 短期计划
short time horizon coordination 短时程协调signal detection and estimation
信号检测和估计
signal reconstruction 信号重构
similarity 相似性
simulated interrupt 仿真中断
simulation block diagram 仿真框图simulation experiment 仿真实验
simulation velocity 仿真速度
simulator 仿真器
single axle table 单轴转台
single degree of freedom gyro 单自由度陀螺single level process 单级过程
single value nonlinearity 单值非线性
singular attractor 奇异吸引子
singular perturbation 奇异摄动
sink 汇点
slaved system 受役系统
slower-than-real-time simulation 欠实时仿真slow subsystem 慢变子系统
socio-cybernetics 社会控制论socioeconomic system 社会经济系统software psychology 软件心理学
solar array pointing control 太阳帆板指向控制solenoid valve 电磁阀source 源点
specific impulse 比冲
speed control system 调速系统
spin axis 自旋轴
spinner 自旋体
stability criterion 稳定性判据
stability limit 稳定极限
stabilization 镇定,稳定
Stackelberg decision theory
施塔克尔贝格决策理论
state equation model 状态方程模型
state space description 状态空间描述
static characteristics curve 静态特性曲线station accuracy 定点精度
stationary random process 平稳随机过程statistical analysis 统计分析
statistic pattern recognition 统计模式识别steady state deviation 稳态偏差
steady state error coefficient 稳态误差系数step-by-step control 步进控制
step function 阶跃函数
stepwise refinement 逐步精化
stochastic finite automaton 随机有限自动机strain gauge load cell 应变式称重传感器strategic function 策略函数
strongly coupled system 强耦合系统subjective probability 主观频率suboptimality 次优性
supervised training 监督学习
supervisory computer control system
计算机监控系统
sustained oscillation 自持振荡
swirlmeter 旋进流量计
switching point 切换点
symbolic processing 符号处理
synaptic plasticity 突触可塑性
synergetics 协同学
syntactic analysis 句法分析
system assessment 系统评价systematology 系统学
system homomorphism 系统同态
system isomorphism 系统同构
system engineering 系统工程
tachometer 转速表
target flow transmitter 靶式流量变送器
task cycle 作业周期
teaching programming 示教编程telemechanics 远动学
telemetering system of frequency division typ e频分遥测系统
telemetry 遥测
teleological system 目的系统
teleology 目的论
temperature transducer 温度传感器
template base 模版库
tensiometer 张力计
texture 纹理
theorem proving 定理证明
therapy model 治疗模型
thermocouple 热电偶
thermometer 温度计
thickness meter 厚度计
three-axis attitude stabilization 三轴姿态稳定three state controller 三位控制器
thrust vector control system
推力矢量控制系统
thruster 推力器
time constant 时间常数
time-invariant system 定常系统,非时变系统time schedule controller 时序控制器
time-sharing control 分时控制
time-varying parameter 时变参数
top-down testing 自上而下测试
topological structure 拓扑结构
TQC (total quality control) 全面质量管理tracking error 跟踪误差
trade-off analysis 权衡分析
transfer function matrix 传递函数矩阵transformation grammar 转换文法
transient deviation 瞬态偏差
transient process 过渡过程
transition diagram 转移图
transmissible pressure gauge 电远传压力表transmitter 变送器trend analysis 趋势分析
triple modulation telemetering system 三重调制遥测系统
turbine flowmeter 涡轮流量计
Turing machine 图灵机
two-time scale system 双时标系统
ultrasonic levelmeter 超声物位计unadjustable speed electric drive
非调速电气传动
unbiased estimation 无偏估计underdamping 欠阻尼
uniformly asymptotic stability 一致渐近稳定性uninterrupted duty 不间断工作制,长期工作制unit circle 单位圆
unit testing 单元测试
unsupervised learing 非监督学习
upper level problem 上级问题
urban planning 城市规划
utility function 效用函数
value engineering 价值工程
variable gain 可变增益,可变放大系数variable structure control system 变结构控制vector Lyapunov function 向量李雅普诺夫函数velocity error coefficient 速度误差系数velocity transducer 速度传感器
vertical decomposition 纵向分解
vibrating wire force transducer
振弦式力传感器
vibrometer 振动计
viscous damping 粘性阻尼
voltage source inverter 电压源型逆变器vortex precession flowmeter 旋进流量计vortex shedding flowmeter 涡街流量计
WB (way base) 方法库
weighing cell 称重传感器
weighting factor 权因子
weighting method 加权法
Whittaker-Shannon sampling theorem
惠特克-香农采样定理
Wiener filtering 维纳滤波
work station for computer aided design
计算机辅助设计工作站
w-plane w平面
zero-based budget 零基预算
zero-input response 零输入响应zero-state response 零状态响应zero sum game model 零和对策模型z-transform z变换
石油化工自动化仪表常见故障分析及处理钟凡 摘要:自动化仪表在石油化工生产工作中具备监管的作用,因此其运行的平稳 性直接影响着企业生产的安全性。深层探索石油化工自动化仪表在工作中经常出 现的故障,了解发生的原因,并提出相对应的解决方案,可以保障自动化仪表在 应用中的效率和质量,提升石油化工生产工作的水平。 关键词:石油化工;自动化仪表;常见故障;处理措施 引言 目前石油化工企业内的自动化仪表主要有温度仪表、压力仪表、流量仪表以 及液位仪表,这些仪表在使用的过程中不可避免的会出现故障问题,企业需要根 据故障出现的原因,结合仪表的运行原理,采用有效的措施及处理步骤,保障自 动化仪表正常运行。 1.温度仪表故障分析及处理措施 1.1温度仪表简介 在石油化工生产工作中,有很多化学反应和化学变化都要在规定条件下进行 操作,因此为了保障生产工作环境的变化符合要求,准确掌握温度的控制范围, 工作人员一定要在生产中安装相应的温度测量仪表。现阶段,对温度的控制主要 选择接触式测量,一般会用热电偶与热电阻等原件来加以控制,并依据生产现场 的总线技术构建自动化测量控制系统。 1.2温度仪表故障分析 这一自动化仪表出现问题后,工作人员要先观察两方面的内容,一方面是仪 表引用电动仪表进行测量、指示及管理;另一方面系统仪表的测量一般要滞后。 具体情况分为以下几点:其一,温度仪表系统的指示数值突然变大或变小通常是 仪表系统出现问题。由于温度仪表系统的测量较为落后,所以不会突然出现问题,此时出现故障的缘由大都是因为热电偶、补偿导线断线等因素带来的;其二,温 度仪表系统指示出现加速震荡问题,一般情况下是由PID调节不正确带来的;其三,温度仪表系统的指示若是出现较大变化,一般是由手工操作带来的,如当时 的操作没有问题,就表明仪表控制系统本身存在问题 1.3处理措施及步骤 在温度仪表日常运行的过程中,一般仪表内的测量组件主要采用的是热电偶,该种类型的组件一般都是采用的双金属显示,所以控制室内的温度测量仪表显示 数值应和现场的温度测量仪表显示数值相同,如果两者的温度不同,则说明温度 仪表出现了故障问题。在处理温度仪表的故障时,由于双金属显示的组件相对较 为简单,所以需要从控制室内的温度仪表入手,首先对热电偶的热电势数值进行 测量,同时查看其对应的温度变化情况,如果热电偶的热电势数值相对较低,这 说明热电偶出现了问题,该种问题大多数都是由于热电偶保护组件内积水造成, 由于热电偶进行温度测量的过程中采用的是点温测量原理,当保护组件内大量积水,会使得热电势大大降低。 2.压力仪表故障分析及处理措施 2.1压力仪表简介 这种仪表的类型有很多种,如变送器、传感器及特种压力等。在石油化工企 业生产工作中应用的压力仪表需要适宜高温环境,且可以在高温、腐蚀性强的环 境下正常测量。通常情况下,石油化工在生产阶段实施压力调节都要以压力变送 器为基础进行操作,此时可以让生产阶段收集的信息传递到控制系统中,以此实
心理学专业英语复习资料 I. Translate the Following English Phrases into Chinese 1. Research Methods 研究方法 2. Psychophysics 心理物理学 3. Theories of Learning 学习理论 4. Social Cognition 社会认知 5.Personality Test 人格测试 6. Extraneous Variable 无关变量 7. Longitudinal Study 纵向研究 8. Crystallized Intelligence 晶体智力 9. Motor control 运动控制 10. Corpus Callosum 胼胝体 11. Group Thinking 群体思维 12. Social Loafing 社会懈怠 13. Social Exchange 社会交换 14. Social Approval 社会赞许 15. Diffusion of Responsibility 责任分散 16. Recency Effec 近因效应 17.Trace Decay 痕迹消退 18. Retrograde Amnesia 倒摄遗忘 19. Social Support 社会支持 20. Self-efficacy 自我效能 21. Case Study 个案研究 II. Translate the Following Chinese Word Groups into English 1. 机能主义functionalism 2. 自我实现self—actualization 3.一般规律研究法nomothetic method 4. 分层抽样stratified sampling 5. 外在信度external reliability 6. 选择性注意selective attention 7. 知觉恒常性perceptual constancy 8. 自我概念self concept 9. 液体智力fluid intelligence 10. 安全型依恋secure attachment 11. 性别图示gender schema 12. 亲社会行为pro social behavior 13. 从众实验conformity experiment 14. 头脑风暴brain storming 15. 社会助长social facilitation 16. 旁观者效应bystander effect 17. 标准差standard deviation 18. 柱状图bar chart 19. 正态分布normal distribution
关于石油化工自动化仪表技术的应用探讨 发表时间:2019-01-21T15:37:40.093Z 来源:《建筑模拟》2018年第31期作者:牛文海 [导读] 从改革开放以来,国家的社会经济水平一直在努力发展,不断追逐世界的脚步。科学技术的发展促使国家对于各种能源的需求也逐渐增加。 牛文海 青岛石化检修安装工程有限责任公司山东青岛 266043 摘要:从改革开放以来,国家的社会经济水平一直在努力发展,不断追逐世界的脚步。科学技术的发展促使国家对于各种能源的需求也逐渐增加。石油,作为我国能源使用的主要生产原料,其开发采集的油田数量以及石油产量对于整个国家都非常重要。生产采集石油的化工企业,其社会责任也因此变得非常重大,他们必须做到满足国家经济运转和人民生活活动两方面对于石油的双重需要。石油化工领域内,自动化仪表技术经过长久的发展提升,依旧作为保证石油化工企业正常运作的最主要的仪器设备之一。它是企业生产、提升石油质量和产量、降低企业工业化生产原料技术成本的关键性技术,在企业之间的相对竞争力提升方面发挥着巨大的作用。就目前而言,自动化仪表技术已经在石油化工领域取得了一定成就,为企业工业化生产赢取了一定的社会收益和经济收益。本文将通过分析石油企业工业化生产过程中所采用的自动化仪表技术的应用,从而推动自动化仪表技术的优化发展,推广自动化技术在石油化工企业中的实际应用与发展,为后人的研究和使用提供理论依据。 关键词:石油化工;自动化仪表技术;应用探讨 引言 在石化生产中,化工仪表构成了其中的核心部分,运用化工仪表可以测定石化工业的数据及信息,从而为自动化的石化工业控制提供根据。近些年来,石化企业更多运用了新型的自动化技术,在自动化控制的前提下改进了工业仪表,进而确保了化工仪表具备更高的可靠性与精准性,从而创造更优良的石化生产效益。为此对于石油化工领域而言,有必要明确自动化控制的基本特征及其内容;结合自动化仪表技术的运用现状,探究可行的技术措施。 1自动化仪表技术使用的必要性 石油工业化生产过程中始终存在人工依赖问题和环境问题等,这些问题的出现不仅企业生产造成一定不利影响,同时企业生产出的产品质量也会遭受一定的影响。故企业在工业化生产过程中利用自动化仪表技术来改善和控制上述问题的出现是非常必要的,这也是自动化技术在石油化工生产领域内应用的重要性。对于要求生产质量高标准的企业而言,聘用操作人员,在生产过程中采取人工操作的方式很难达到企业所要求的精度标准,采取人工操作不仅会造成原料投入控制不稳定,生产流程和产品质量等方面都难以满足企业的要求,甚至有可能出现温度或压力过高的现象,导致对于最后的成品质量造成巨大的影响。严重时还会出现作业环境中的安全隐患,给操作人员的生命安全带来威胁。多数情况下采取单纯的人工操作会使生产过程中出现工作质量低等问题。石油化工企业的生产流程本身就是比较复杂、庞大的生产作业流水技术流程,如果过度依赖人工操作会产生对于劳动力的严重需求,这样不仅增加企业生产成本,还极有可能出现人力短缺的情况。人工操作的工作效率地下,远不如机械自动化生产的工作效率,所以人工操作的生产方式难以实现企业生产的需要,也无法跟上社会发展的步伐。 2自动化控制的基本技术特征 在传统的生产控制中,石油化工行业通常运用DCS控制的自动化策略来实现生产控制,DCS系统有助于简化流程,操作简单。近些年来,自动化控制相关的技术更新很快,更加先进智能。具体而言,自动化控制应当具备如下的技术特性。 2.1自动化的仪表控制有利于优化技术措施 近些年来,自动化控制的具体措施正在获得改进和提升。从化工领域来讲,大量使用单回路和串级控制。对于控制器规律通常可以选择PID方式。PID设置了独立性的软件包,包含了各种整定方法,智能PID还密切联系了软测量技术与动态变量技术等。目前很多化工企业已意识到PID技术的价值,因而开始尝试大量运用串级控制的仪表测控方式。 2.2交互界面是化工仪表控制的重要一环 化工仪表实现自动化控制,这个过程不能缺少交互性的人机界面。在显示器的辅助下,操作员可以观察到被控参数值,通过输入自动控制的设定值命令现场执行机构动作,进而为化工决策提供必要的参考。这在根本上符合了集成性的化工生产。从现状来看,人性化的交互界面正在逐步推广与普及,特别是新型自动化系统产生后,操作软件访问数据更加简单。交互界面是化工仪表控制的重要一环。 2.3自动化控制在本质上保障了安全性 石化行业表现出较强风险性,大多数生产操作都蕴含危险。为了消除风险,自动化的化工仪表有必要确保安全,对于各项风险都应当予以控制并且尽量消除。对于安全性加以综合考虑,自动化控制最根本的目标就在于在保证安全的前提下提升效益并且杜绝频繁发生化工事故。 3石油化工行业自动化仪表的控制技术的应用 3.1常规控制 常规控制是控制理论中最为基础的控制方式,主要包括顺序控制、批量控制和连续控制等。一般来说,常规控制的内容是比较固定的,即使系统已经升级更新,对于常规控制而言几乎没有变化。传统控制的发展,比如从常规DCS到新一代DCS,电气单元的有机组合等,其中包含的部分和内容如何都基本没发生什么变化。其次,常规控制涵盖的内容主要有:比例调节、分程调节控制、和PID调节等,其中PID调节是控制理论中最简单的调节控制方式。传统控制在控制学中,是对自动化工具最基本部分的控制,由于块数据和控制算法基本维持不变,因此主要通过配置选项和控制方案进行优化。 3.2先进控制 随着科学技术的不断发展,控制理论与多门学科不断地交叉融合,已经进入了现代控制阶段,出现了大量基于现代控制理论的智能算法,而且多变量的控制技术得到了广泛的应用。相较于传统的PID控制,目前,智能PID控制器已经比较常见了,而且应用前景广阔,因为它具有级联控制功能,能够使控制的效率更高,而且比传统的单轨控制系统更稳定。对于石化企业而言,智能PID控制器的出现,能够大大
心理学是什么--What Psychology Is Why people do the things they do is an age-old question. However, psychology--the science concerned with behavior, both humans and animals--is only about 125 years old. Despite its youth, it is a broad discipline, essentially spanning subject matter from biology to sociology. Biology studies the structures and functions of living organisms. Sociology examines how groups function in society. Psychologists study two critical relationships: one between brain function and behavior, and one between the environment and behavior. As scientists, psychologists follow scientific methods, using careful observation, experimentation, and analysis. But psychologists also need to be creative in the way they apply scientific findings. Psychologists are frequently innovators, evolving new approaches from established knowledge to meet changing needs of people and societies. They develop theories and test them through their research. As this research yields new information, these findings become part of the body of knowledge that practitioners call on in their work with clients and patients. Psychology is a tremendously varied field. Psychologists conduct both basic and applied research, serve as consultants to communities and organizations, diagnose and treat people, and teach future psychologists and other types of students. They test intelligence and personality. They assess behavioral and mental function and well-being, stepping in to help where appropriate. They study how human beings relate to each other and also to machines, and they work to improve these relationships. And with America undergoing large changes in its population makeup, psychologists bring important knowledge and skills to understanding diverse cultures. Many psychologists work independently. They also team up with other professionals--for example, other scientists, physicians, lawyers, school personnel, computer experts, engineers, policy makers, and managers--to contribute to every area of society. Thus we find them in laboratories, hospitals, courtrooms, schools and universities, community health centers, prisons, and corporate offices. Psychologists traditionally study both normal and abnormal functioning, and also treat patients with mental and emotional problems. Today, they are increasingly concentrating on behaviors that affect the mental and emotional health and mental processes of healthy human beings. For example, they work with business executives, performers, and athletes to combat stress and improve performance. They advise lawyers on jury selection and collaborate with educators on school reform. They show up immediately following a disaster such as a plane crash or bombing, to help victims and bystanders recover from the trauma, or shock, of the event. They team with law enforcement and public health officials to analyze the causes of such events and prevent their occurrence. Involved in all aspects of our fast-paced world, psychologists must keep up with what's happening all around us. When you're a psychologist, your education never ends. Psychology is a discipline with a bright future. Among fields requiring a college degree, it is expected to be the third fastest-growing field in America through the year 2005 and to continue to grow steadily for at least another dozen years after that. Opportunities for work in psychology are expanding in number and scope. The move toward preventing illness, rather than merely diagnosing and treating it, requires people to learn how to make healthy behavior a routine part of living. Indeed, many of the problems facing society today are problems about behavior, for example, drug addiction, poor personal relationships, violence at home and in the street, and the harm we do to our environment. Psychologists contribute solutions to problems through careful collection of data, analysis of data, and development of intervention strategies--in other words, by
电力系统power system 发电机generator 励磁excitation 励磁器excitor 电压voltage 电流current 升压变压器step-up transformer 母线bus 变压器transformer 空载损耗no-load loss 铁损iron loss 铜损copper loss 空载电流no-load current 有功损耗active loss 无功损耗reactive loss 输电系统power transmission system 高压侧high side 输电线transmission line 高压high voltage 低压low voltage 中压middle voltage 功角稳定angle stability 稳定stability 电压稳定voltage stability 暂态稳定transient stability 电厂power plant 能量输送power transfer 交流AC 直流DC 电网power system 落点drop point 开关站switch station 调节regulation 高抗high voltage shunt reactor 并列的apposable 裕度margin 故障fault 三相故障three phase fault 分接头tap 切机generator triping 高顶值high limited value 静态static (state) 动态dynamic (state) 机端电压控制AVR 电抗reactance 电阻resistance 功角power angle 有功(功率)active power 电容器Capacitor 电抗器Reactor 断路器Breaker 电动机motor 功率因数power-factor 定子stator 阻抗impedance 功角power-angle 电压等级voltage grade 有功负载: active load PLoad 无功负载reactive load 档位tap position 电阻resistor 电抗reactance 电导conductance 电纳susceptance 上限upper limit 下限lower limit 正序阻抗positive sequence impedance 负序阻抗negative sequence impedance 零序阻抗zero sequence impedance 无功(功率)reactive power 功率因数power factor 无功电流reactive current 斜率slope 额定rating 变比ratio 参考值reference value 电压互感器PT 分接头tap 仿真分析simulation analysis 下降率droop rate 传递函数transfer function 框图block diagram 受端receive-side
石油化工自动化仪表技术的的应用分析 摘要:针对石油化工自动化仪表技术的应用进行分析,介绍了石油化工企业当 中自动化仪表技术的几个类型,分别为,物味仪表,流量仪表。结合当前石油化 工企业发展现状,探讨可使用自动化仪表技术的必要性。最后,结合这些内容, 总结石油化工企业自动化仪表技术的应用情况,内容主要有:自适应控制、最优 控制、理性引进、加大科技投入。 关键词:石油化工;自动化仪表;物位仪表 随着科学技术的不断发展,在石油化工企业中也引进了大量的先进技术和先 进设备,石油化工企业具有一定特殊性,对自动化仪表技术进行应用,能够在一 定程度上提升产品生产效率,同时为工作人员的人身安全提供一定保障。因此, 研究当前石油化工企业使用的自动化仪表技术情况,分析不同自动化仪表技术的 适用范围,探讨在对这些设备使用过程中应当注意的问题,对于石油化工企业未 来发展具有重要意义。 1 石油化工自动化仪表的类型 1.1 物味仪表 结合应用对象的不同将物位仪表进行进一步划分,还可以将仪表分成两种类型,分别为料位表和液位表。这两种仪表通常被应用在两相物资的计量中,被人 们称作是相位计。其中电子型物位仪表的应用较为广泛,这种仪表的使用量已经 超过了机械式物位仪表。人们应用的电子型物位仪表当中,使用和发展最为广泛 的是非接触式物位仪表。 1.2 流量仪表 流量仪表主要被应用在对是由输送管道当中的单位时间内流载物体的体积进 行测量,该种类型的仪表同样在石油化工企业当中广泛应用,属于一种自动化仪表。对于流量计而言,其已经被应用在石油开采、石油运输和石油冶炼、石油交 工等领域,伴随着当前我国石油贸易不断增加,能够对大量的输送管道进行测量,同时也可以对微小的输送管道进行测量,该仪器逐渐成为石油化工企业的新能需要。流量仪表使用过程中,稳定性极高,同时还具备一定的耐腐蚀性能,测量精 度较高,并不会因为其他因素而干扰。 2 应用石油化工自动化仪表技术的必要性 对于石油化工企业而言,进行具体生产过程中,存在一定的人工依赖问题, 同时也存在一定环境问题等,这些问题的存在不但给石油化工企业带来一定影响。同时还会对企业生产和质量带来影响。因此,对自动化仪表技术进行科学应用, 并且对其进行进一步改善和控制,十分必要,这也是应用自动化技术的重要性。 当石油化工企业具体生产过程中,一些企业对生产过程要求较高,采用人工 操作方式,难以达到工作精度的需求,这不仅给材料控制带来影响,也导致生产 流程和产品追量等方面很难满足企业对质量的需求。在一定程度上,还有可能会 导致温度超标现象,这种情况下,会给最后的品质带来影响,如果后果严重,可 能会出现安全隐患,从而给工作人员的生命安全带来威胁[1]。 如果过分依赖人工操作方式,会导致操作程度过低、工作效率低下等问题, 这种情况下,所生产出来的产品中会出现一定量的次品。对于对于石油化工企业 而言,可能会有人力短缺的现象出现。对于人力操作而言,其工作效率有限,和 机械相比存在较大的差距,这就促使企业生产需求难以实现,导致企业竞争力下降。如果生产过程中,一个区域中集中大量的工人,也为其安全埋下隐患。
心理学专业英语总结——HXY 随意传阅·顺颂试安 注释:1.“*”在书上是黑体字,但感觉不重要背了也没什么卵用 2.“”背景色项表示答案恰好有三项,可能出选择 3. 人名已加黑,可能连线或选择 4. 每章节的末尾有方便记忆的单词表(只包括这篇总结中出现的关键单词) 5. 方便理解记忆,已在各项下方注明中文释义 6.“,”大部分都是作为点之间的分割,类似于逗号,前后不连成句子 Chapter 1——Perspectives in psychology 心理学纵览 Section 1: Approaches to psychology 心理学入门 ●What is psychology? 心理学是什么 Definitions: The scientific study of behaviour and mental processes. 定义:对行为和心理过程的科学研究 Psychology come from: ①philosophy, ②biology ③physics. 心理学来源于:哲学、生物学和医学 When: 1879 as a separate scientific discipline. 形成于:1879年,作为独立学科 History (develop): structuralism, functionalism, psychoanalysis, behaviourism, cognitive psychology, humanistic approach, biological approach. 历史发展:结构主义,机能主义,精神分析,行为主义,认知,人本主义,生理。 ●The psychoanalytic approach to psychology 精神分析理论 Origins & history: Sigmund Freud, unconscious mental causes, treat as the causes of mental disorders, built up an theory. 历史来源:弗洛伊德提出潜意识心理动机,把它视为心理疾病的原因,并建立理论。 Assumptions: unconscious processes, psychic determinism, hydraulic drives, psychodynamic conflict, stages of development. 假设:潜意识过程,精神决定论,驱力(攻击、性),心理动力冲突,发展阶段 Methods of investigation: case study (method), free association (tech), dream analysis (tech). 研究方法:个案研究方法,自由联想技术,梦的解析技术 *Areas of explanation: personality development, moral/gender development, aggression, abnormality, memory. 可解释领域:人格发展,道德/性别发展,攻击性,异常,记忆 *Weaknesses: unrefutable, theoretically unscientific. 缺点:不可被其他事件驳斥,因此理论不具科学性 ●The behaviourist approach to psychology 行为主义理论 Origins & history: John Watson, empiricism, learning. 历史来源:华生,经验主义,学习 Assumptions: behaviour is learned from the environment, only observable behaviour should be studied. 假设:行为来源于环境,研究可观察的行为 *Areas of explanation: language acquisition, moral development, attraction, abnormality.
第十二章自动化仪表基础知识 第一节测量误差知识 一、测量误差的基本概念 冶金生产过程大多具有规模大、流程长、连续化、自动化的特点,为了有效地进行工艺操作和生产控制,需要用各种类型的仪表去测量生产过程中各种变量的具体量值。虽然进行测量时所用的仪表和测量方法不同,但测量过程的机理是相同的,即都是将被测变量与其同种类单位的量值进行比较的过程。各种测量仪表就是实现这种比较的技术工具。对于在生产装置上使用的各种测量仪表,总是希望它们测量的结果准确无误。但是在实际测量过程中,往往由于测量仪表本身性能、安装使用环境、测量方法及操作人员疏忽等主客观因素的影响,使得测量结果与被测量的真实值之间存在一些偏差,这个偏差就称为测量误差。 二、测量仪表的误差。 误差的分类方法多种多样,如按误差出现的规律来分,可分为系统误差、偶然误差和疏失误差;按仪表使用的条件来分,有基本误差、辅加误差;按被测变量随时间变化的关系来分,有静态误差、动态误差;按与被测变量的关系来分,有定值误差、累计误差。测量仪表常凋的绝对误差、相对误差和引用误差是按照误差的数值表示来分类的。 1、绝对误差 绝对误差是指仪表的测量值与被测变量真实值之差。用公式表示为: △C=Cm-Cr 式(1-1) 试中Cm代表测量值,Cr代表真实值(简称真值),△C代表绝对误差。事实上,被测变量的真实值并不能确切知道,往往用精确度比较高的标准仪器来测量同一被测变量,其测量结果当作被测变量的真实值。 绝对误差有单位和符号,但不能完整地反映仪表的准确度,只能反应某点的准确程度。我们将各点绝对误差中最大的称为仪表的绝对误差。绝对误差符号相反的值称为修正值。 2、相对误差 相对误差是指测量的绝对误差与被测变量之比。用公式表示为 式(1-2) 式中AC为测量的绝对误差,Cr为被测变量的真实值。 由上式可见,相对误差C0是一个比值,它能够客观地反映测量结果的准确度,通常以百分数表示。 如某化学反应釜中物料实际温度为300℃,仪表的示值为298.5℃。 求得测量的绝对误差 测量的相对误差 3、引用误差(相对折合误差或相对百分误差) 测量仪表的准确性不仅与绝对误差和相对误差有关,而且还与仪表的测量范围有关。工业仪表通常用引用误差来表示仪表的准确程度,即绝对值与测量范围上限或测量表量程的比值,以非分比表示:
自动化专业英语常用词汇 acceleration transducer 加速度传感器 accumulated error 累积误差 AC-DC-AC frequency converter交-直-交变频器 AC (alternating current) electric drive 交流电子传动 active attitude stabilization 主动姿态稳定 adjoint operator 伴随算子 admissible error 容许误差 amplifying element 放大环节 analog-digital conversion 模数转换 operational amplifiers运算放大器 aperiodic decomposition 非周期分解 approximate reasoning 近似推理 a priori estimate 先验估计 articulated robot 关节型机器人 asymptotic stability 渐进稳定性 attained pose drift 实际位姿漂移 attitude acquisition 姿态捕获 AOCS (attitude and orbit control system) 姿态轨道控制系统attitude angular velocity 姿态角速度 attitude disturbance 姿态扰动 automatic manual station 自动-手动操作器 automaton 自动机 base coordinate system 基座坐标系 bellows pressure gauge 波纹管压力表 gauge测量仪器
石油化工自动化仪表选型设计规范 SH 3005-1999 3 温度仪表 3.1单位和量程 3.1.1温度仪表的标度(刻度)单位, 应采用摄氏度(C)。 3.1.2 温度标度(刻度)应采用直读式。 3.1.3 温度仪表正常使用温度应为量程的50%一70%, 最高测量值不应超过量程的90%。多个测量元件共用一台显示表时, 正常使甩温度应为量程的20%一90%, 个别点可低到量程的10%。 3.2 就地温度仪表 3.2.1就地温度仪表应根据工艺要求的测温范围、精确度等级, 检测点的环境、工作压力等因素选用。 3.2.2一般情况下, 就地温度仪表宜选用带外保护套管双金属温度计, 温度范围为-80一5OOC。刻度盘直径宜为1OOmm; 在照明条件较差、安装位置较高或观察距离较远的场合, 可选用15Omm。需要位式控制和报警的, 可选用耐气候型或防爆型电接点双金属温度计。仪表外壳与保护管连接方式, 宜按便于观察的原则选用轴向式或径向式, 也可选用万向式。 3.2.3 在精确度要求较高、振动较小、观察方便的场合, 可选用玻璃液体温度计, 其温度范围:有机液体的为-80一1OO℃。需要位式控制及报警, 且为恒温控制时, 可选用电接点温度计。
3.2.4 被测温度在-200一50℃或-80一500℃范围内, 在无法近距离读数、有振动、低温且精确度要求不高的场合, 可选用压力式温度计。压力式温度计的毛细管应有保护措施, 长度应小于2Om。 3.2.5 就地测量、调节, 宜选用基地式温度仪表。 3.2.6关键的温度联锁、报警系统, 需接点信号输出的场合, 宜选用温度开关。 3.2.7 安装在爆炸危险场所的就地带电接点的温度仪表、温度开关, 应选用隔爆型或本安型。 3.3集中检测温度仪表 3.3.1要求以标准信号传输的场合, 应采用温度变迭器。在满足设计要求的情况下, 可选用测量和变送一体化的温度变送器。 3.3.2 检测元件及保护套管, 应根据温度测量范围、安装场所等条件选择(不同检测元件的温度测量范围见表 3.3.2), 且应符合下列规定: 1热电偶适用于一般场合; 热电阻适田于精确度要求较高、无振动场合; 热敏电阻适用于要求测量反应速度快的场合。 2 采用热电阻温度检测元件时, 宜采用PtlO0热电阻。 3 测量设备或管道的外壁温度, 应选用表面热电偶或表面热电阻。 4 测量流动的含固体颗粒介质的温度, 应选用耐磨热电偶。 5 下列情况, 可选用销装热电阻、热电偶: a测量部位比较狭小, 测温元件需要弯曲安装; b 被测物体热容量非常小;
心理现象 mental phenomenon 心理过程 mental process 心理状态 mental state 心理活动 mental activity 意识 consciousness 心理维度 psychological dimension 心理运动 psychomotor 内部活动 internal activity 普通心理学 general psychology 实验心理学 experimental psychology 行为科学 behavioral science 心身关系 mind-body relation 心理机能定位 localization of mental function 心理能动性 mental activism 外周论 peripheralism 先天理论 nativistic theory 强调遗传素质决定人心理的产生与发展。 遗传 heredity 目的论 teleology 认为生物和人类的活动受一定目的的引导。 活动 activity 活动理论 activity theory 认知心理学 cognitive psychology 认知 cognition 相对于情感、意志等心理过程的所有认识过程的总称。包括知觉、注意、表象、学习记忆、问题解决、思维和言语等心理过程。 认知过程 cognitive process 认知结构 cognitive structure 元认知 metacognition
认知失调 cognitive dissonance 认知地图 cognitive map 认知技能 cognitive skill 认知方式 cognitive style 信息 information 信息论 information theory 信息加工 information processing 信息加工心理学 information processing psychology 信息加工理论 information processing theory 信息加工模型 information processing model 中央处理器模型 central processor model 信息储存 information storage 信息提取 information retrieval 人工智能 artificial intelligence, AI 计算机类比 computer analogy 计算机模拟 computer simulation 计算机模型 computer model 唯心主义心理学 idealistic psychology 意动心理学 act psychology 唯意志论 voluntarism 唯灵论 spiritualism 强调超自然精神作用。 心灵学 parapsychology 心灵决定论 psychic determinism 心灵致动 psychokinesis, PK 心理技术学 psychotechnics 内省 introspection 内省法 introspective method 直觉主义 intuitionalism
自动化专业英语词汇大全 acceleration transducer加速度传感器base coordinate system基座坐标系 acceptance testing验收测试Bayes classifier贝叶斯分类器 accessibility可及性bearing alignment方位对准 accumulated error累积误差bellows pressure gauge波纹管压力表 AC-DC-AC frequency converter交 - 直 -交变频器benefit-cost analysis收益成本分析 AC (alternating current) electric drive交流电子传bilinear system双线性系统 动biocybernetics生物控制论 active attitude stabilization主动姿态稳定biological feedback system生物反馈系统 actuator驱动器,执行机构black box testing approach黑箱测试法 adaline 线性适应元blind search盲目搜索 adaptation layer适应层block diagonalization块对角化 adaptive telemeter system适应遥测系统Boltzman machine玻耳兹曼机 adjoint operator伴随算子bottom-up development自下而上开发 admissible error容许误差boundary value analysis边界值分析 aggregation matrix集结矩阵brainstorming method头脑风暴法 AHP (analytic hierarchy process)层次分析法breadth-first search广度优先搜索 amplifying element放大环节butterfly valve蝶阀 analog-digital conversion模数转换CAE (computer aided engineering)计算机辅助工annunciator信号器程 antenna pointing control天线指向控制CAM (computer aided manufacturing)计算机辅助anti-integral windup抗积分饱卷制造 aperiodic decomposition非周期分解Camflex valve偏心旋转阀 a posteriori estimate后验估计canonical state variable规范化状态变量approximate reasoning近似推理capacitive displacem ent transducer电容式位移传a priori estimate先验估计感器 articulated robot关节型机器人capsule pressure gauge膜盒压力表 assignment problem配置问题,分配问题CARD 计算机辅助研究开发 associative memory model联想记忆模型Cartesian robot直角坐标型机器人 associatron联想机cascade compensation串联补偿 asymptotic stability渐进稳定性catastrophe theory突变论 attained pose drift实际位姿漂移centrality集中性 attitude acquisition姿态捕获chained aggregation链式集结 AOCS (attritude and orbit control system)姿态轨chaos 混沌 道控制系统characteristic locus特征轨迹 attitude angular velocity姿态角速度chemical propulsion化学推进 attitude disturbance姿态扰动calrity 清晰性 attitude maneuver姿态机动classical information pattern经典信息模式attractor吸引子classifier分类器 augment ability可扩充性clinical control system临床控制系统 augmented system增广系统closed loop pole闭环极点 automatic manual station自动 - 手动操作器closed loop transfer function闭环传递函数automaton自动机cluster analysis聚类分析 autonomous system自治系统coarse-fine control粗 -精控制 backlash characteristics间隙特性cobweb model蛛网模型