戴尔DELL笔记本最新BIOS 中英文对照表
This section lists out the primary hardware features of the system. There are no configurable options in this section, only information.
Lists the the following:
System Information
o BIOS Version
o Service Tag
o Asset Tag
o Ownership Tag
o Manufacture Date
o Ownership Date
Memory Information
o Memory Installed
o Memory Available
o Memory Speed
o Memory Channel Mode
o Memory Technology
o DIMM A Size
o DIMM B Size
Processor Information
o Processor Type
o Core Count
o Processor ID
o Current Clock Speed
o Minimum Clock Speed
o Maximum Clock Speed
Device Information
o Primary Hard Drive 该选项列出系统的主要硬件信息。此处仅提供信息，无法修改。
系统信息
o BIOS 版本
o机器编号
o资产编号
o Ownership编号
o出厂日期
o Ownership日期
内存信息
o安装内存容量
o可用内容容量
o当前内存频率
o Memory通道
o Memory技术
o DIMM A尺寸
o DIMM B尺寸
CPU信息
o CPU型号
o CPU核数（几核）
o CPU ID
o当前时钟频率
o最小时钟频率
o最大时钟频率
设备信息
o主硬盘容量
o光驱型号
o系统eSATA设备
The computer attempts to boot from the sequence of devices specified in this list:
Diskette drive
USB Storage Device
CD/DVD/CD-RW Drive.
Internal HDD (IRRT)
Cardbus NIC
Onboard NIC
This list specifies the order that the BIOS searches devices when trying to find an operating system to boot. To change the boot order, select the device to be changed in the list then click the up/down arrows or use the keyboard PgUp/PgDn keys to change the boot order of the device. The boot devices can also be de-selected from the list using the 计算机尝试从以下列表顺序启动：
软驱
USB存储设备
光驱
Internal HDD (IRRT)
Cardbus NIC
Onboard NIC
我们可以勾选需要启动的设备。并在界面右侧对显示的设备设置启动的顺序，可以通过鼠标也可以通过上下键选择。
我们可以通过选择UEFI BIOS启动，点击“Add Boot Option”自定义启动选项。
Internal Modem
Module Bay
ExpressCard or PC Card
Media Card, PC Card and 1394
External USB Port
Microphone
eSATA Ports
Hard Drive Free Fall Protection
Camera / Microphone Default setting: All enabled.
内置Modem
模块设备
ExpressCard 或PC Card
SD卡, PC卡和1394
外置USB口
内置麦克风
eSATA口
自由落体硬盘保护
摄像头/ 麦克风
默认所有设备启用。
This field lets you set, change, or delete the administrator (admin) password (sometimes called the "setup" password). The admin passwaord enables several security features when set including:
Restricts changes to the settings in Setup
Restricts the boot devices listed in the F12 Boot Menu to
those enabled in the "Boot Sequence" field.
Prohibits changes to the owner and asset tags.
Substitutes for the system password if the system prompts
for a password during power on.
Successful changes to this password take effect immediately.
Default Setting: Not set
☆NOTE:
If you delete the admin password, the system password is also
deleted. Also, the admin password can be used to delete the
HDD password. For this reason, you cannot set an admin
password if a system password or HDD is already set. The admin password must be set first if used in conjunction with a system
and/or HDD password. 该页面可以设置，修改，或删除Admin 密码。设置了Admin密码将启用下面安全功能：
限制改变BIOS设置
限制F12启动菜单的设备
禁止修改Owner和Asset编号
在POST界面可以替代system password
默认没有设置Admin 密码。
注意：如果删除Admin 密码，System 密码也被删除。Admin密码可以被使用去删除硬盘密码。但是必须首先设置Admin密码；如果已经设置了System密码或硬盘密码，不能再设置Admin密码。
当设置了Admin 密码，该项可允许/禁用修改WIFI 开关设置和WIFI Catcher设置
许可－不需要管理员密码可以修改或者删
除无线设置
拒绝－需要有效的管理员密码
This field allows the computer to power up from the off state when triggered by a special LAN signal or from Hibernate state when triggered by a special wireless LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system.
Disabled— Do not allow the system to power on when it
receives a wake-up signal from the LAN or wireless LAN.
LAN Only— Allow the system to be powered on by special
LAN signals.
WLAN Only— Allow the system to be powered on by special
WLAN signals.
LAN or WLAN— Allow the system to be powered on by
special LAN or wireless LAN signals.
Default setting: Disabled 关闭或启用远程LAN唤醒
Disabled—关闭LAN/WLAN 唤醒.
LAN Only—允许LAN唤醒
WLAN Only—允许WLAN唤醒
LAN or WLAN—允许LAN和WLAN唤醒默认：关闭
This option lets you choose one of two methods to enable the keypad that is embedded in the internal keyboard.
Fn Key Only— The keypad is only enabled when you hold
down the <；Fn>；key.
By Num Lk— The keypad is enabled when (1) the Num Lock
LED is on and (2) no external keyboard is attached. Note that
the system might not notice immediately when an external
keyboard is detached.
☆NOTE:
When Setup is running, this field has no effect—Setup works in
the FN Key Only mode.
Default Setting: Fn Key Only.数字小键盘的设置选项：
通过Fn键来控制小键盘；必须按住Fn键
再输入带有小键盘的字母键。
通过Num lk键来控制小键盘；该项设置后，
按Num LK键点亮数字锁定灯，直接按带有
小键盘的字母键。
默认：Fn控制
This option defines how the system handles mouse and touch pad input.
Serial Mouse— Use a serial mouse and disable the internal
touch pad.
PS/2 Mouse— Disable the integrated touch pad when an
external PS/2 mouse is present. 鼠标和触摸板输入设置选项：
使用串口鼠标时，禁用触摸板
Ps/2口鼠标连接时，禁用触摸板
当外接鼠标存在时，保留使用触摸板
默认设置：Touchpad-PS/2（当外接鼠标存在时，保留使用触摸板）
Touchpad-PS/2— Leave the integrated touch pad enabled
when an external PS/2 mouse is present.
Default Setting: Touchpad-PS/2.
该界面可以设置在计算机POST界面，启用或禁用USB
设备、
点击复选框，启用USB emulation
如设置禁用，将不能从任何USB总线设备（软
驱，硬盘，u盘）启动
默认：启用
This field can speed up the boot process by bypassing some compatibility steps.
Minimal— Boot quickly unless the BIOS has been updated,
memory changed, or the previous POST did not complete.
Thorough— Do not skip any steps in the boot process.
Auto— Allow the operating system to control this setting
(this works only when the operating system supports Simple 该界面可以设置CPU加速启动
最快—除BIOS 被修改，内存改变或者上
次启动没有完成，将执行快速启动
完全—在启动过程中不跳过任何的步骤
自动—允许操作系统控制(仅在操作系统支
持Simple Boot Flag).
默认：最快