(a)Series Name FBR12: FBR12 Series
(b)Enclosure & Coil Power
N
: Standard (plastic sealed type)
W : High dielectric strength type (plastic sealed type)H
: High sensitivity type
(c)
Coil Type D : DC coil
(d)Nominal Voltage
Refer to the COIL DATA CHART
(e)Contact Material
Nil : Gold-overlay silver-nickel –P : Gold-overlay silver-palladium
(f)
Custom Designation To be assigned custom specification
(g)
CSA Standard
–CSA : UL114 + CSA recognized
–CSA : UL1950 + CSA (under application)
Note:The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR12ND05
Stamp:12ND05
s FEATURES
q Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay.
q Slim type for high density mounting
q
Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements
q UL recognized and CSA certified q Low power consumption
q
Conforms to IEC 950 (W type only)
– 2.5 mm clearance and creepage between coil and contacts –5000 V surge strength between coil and contacts (2x10μs surge wave)
–2000 Vrms dielectric strength between coil and contacts –UL 1950 and IEC950 (approval in process)
FBR12N D 12 –P –**(–CSA)[Example]
(a)(b)
(c)
(d)(e)(f )(g)
s ORDERING INFORMATION
s SAFETY STANDARD AND FILE NUMBERS
Nominal coil voltage
Contact rating
0.5 A 125 VDC resistive 3 to 24 VDC
2 A 30 VDC resistive 0.
3 A 110 VAC resistive
UL508, 1950, 114 (File No. E63615)
C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)
N O
T F O R N E W D E S I G N F B R 12 S E R I E S
T O B E D I S C O N T I N I E D
N O
T F O R N E W D E S I G N F B R 12 S E R I E S
T O B E D I S C O N T I N I E D
Life
Mechanical
1 × 108 operations minimum
Electrical DC
2 × 105 operations minimum 5 × 105 operations minimum (at contact rating)
AC
1 × 105 operations minimum
200 × 103 operations minimum
Other
Vibration Misoperation 10 to 55 Hz (double amplitude of 3.3 mm)Resistance
Endurance 10 to 55 Hz (double amplitude of 5.0 mm)Shock Misoperation 500 m/s 2 (11±1 ms)Resistance
Endurance 1,000 m/s 2 ( 6 ±1 ms)
Weight
Approx. 1.5 g Approx. 1.9 g Approx. 1.5 g Approx. 1.9 g
s SPECIFICATIONS
Item
Standard (Gold-overlay silver-nickel)
-P type (Gold-overlay silver-palladium)
Standard
High dielectric Standard
High dielectric strength type
strength type
Contact
Arrangement 2 form C (DPDT)
Material Gold-overlay silver-nickel Gold-overlay silver-palladium
Style
Bifurcated
Resistance (initial)Maximum 100 m ? (at 0.1 A 6 VDC)Rating (resistive)
0.5 A 125 VAC or 1 A 30 VDC
Maximum Carrying Current 2 A (at 20°C)Maximum Switching Power 62.5 VA or 60 W Max. Switching Voltage*1
250 VAC or 220 VDC
Maximum Switching Current 2 A
Minimum Switching Load*2
10 μA 10 VDC (reference)
Capacitance Approximately 1.0 pF (between open contacts, adjacent contacts )(at 10 kHz) Approximately1.0 pF (between coil and contacts)Coil
Nominal power (at 20°C)
Approximately Approximately Approximately Approximately 0.14 to 0.2 W 0.23 to 0.25 W 0.14 to 0.2 W 0.23 to 0.25 W
Operate power (at 20°C)Approximately Approximately Approximately Approximately 0.08 to 0.112 W 0.13 to 0.14 W 0.08 to 0.112 W 0.13 to 0.14 W
Thermal Resistance at Approximately 115°C/W
Continuous Thermal Load Operating Temperature –40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA)Operating Humidity
45 to 85%RH
Time Value
Operate (at nominal voltage)
Maximum 4 msec.
Release (at nominal voltage)Maximum 4 msec.
Max. Switching Frequency Mechanical 3 Hz or electrical 0.5 Hz (at contact rating)
Insulation
Resistance (initial)
Minimum 1000 M ? (at 500 VDC)
Dielectric between open contacts 1,000 VAC
Strength
adjacent contacts 1 minimum
between coil and contacts 1,500 VAC 1 min. 2,000 VAC 1 min. 1,500 VAC 1 min. 2,000 VAC 1 min.
Surge between open 1,500 V
Strength contacts,10 × 700 μs
adjacent contacts
between coil and contacts 2,500 V 5,000 V 2,500 V 5,000 V 2 × 10 μs 2 × 10 μs 2 × 10 μs 2 × 10 μs
1,500
75010700
2,500
1,250
210
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*
2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment.
N O
T F O R N E W D E S I G N F B R 12 S E R I E S
T O B E D I S C O N T I N I E D
Item
High Sensitive Type
Standard (Gold-overlay silver-nickel) -P type (Gold-overlay silver-palladium)
Contact
Arrangement 2 form C (DPDT)
Material
Gold-overlay silver-nickel Gold-overlay silver-palladium
Style
Bifurcated
Resistance (initial)Maximum 100 m ? (at 0.1 A 6 VDC)Rating (resistive)
0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C)Maximum Switching Power 62.5 VA or 30 W Max. Switching Voltage*1
250 VAC or 220 VDC Maximum Switching Current 2 A
Minimum Switching Load*2
10m VDC - 10μ A
Capacitance Approximately 1.0 pF (between open contacts, adjacent contacts )(at 10 kHz) Approximately1.0 pF (between coil and contacts)Coil
Nominal power (at 20°C)
Approximately 50mW
Operate power (at 20°C)Approximately 40m W
Operating Temperature –40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA)Operating Humidity
45 to 85%RH
Time Value Operate (at nominal voltage)Maximum 5 msec.
Release (at nominal voltage)
Maximum 5 msec.
Insulation
Resistance (initial)
Minimum 1000 M ? (at 500 VDC)
Dielectric between open contacts 750 VAC Strength
adjacent contacts 1 minute
between coil and contacts 1,500 VAC 1 minutes Surge between open 1,500 V Strength contacts,10 × 700 μs
adjacent contacts
between coil and contacts 2,500 V 2 × 10 μs
Life
Mechanical
1 x 108 operations minimum
Electrical DC 2 × 105 operations minimum 5 × 105 operations minimum (at contact rating)
AC
1 × 105 operations minimum
200 × 103 operations minimum
Other
Vibration Misoperation 10 to 55 Hz (double amplitude of 3.3` mm)Resistance
Endurance 10 to 55 Hz (double amplitude of 5.0 mm)Shock Misoperation 500 m/s 2 (11±1 ms)Resistance
Endurance 1,000 m/s 2 ( 6 ±1 ms)Weight
Approx. 1.9 g
s SPECIFICATIONS
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*
2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment.
N O
T F O R N E W D E S I G N F B R 12 S E R I E S
T O B E D I S C O N T I N I E D
MODEL
Nominal
Nominal Coil current Must Must Nominal Operate Coil resistance (at nominal operate operate temperature voltage
(±10%)voltage)
voltage*
1voltage*
1power
power
rise
Standard -P type approx.FBR12ND03FBR12ND03-P 3 VDC 64.3 ?46 mA FBR12ND04FBR12ND04-P 4.5 VDC 145 ?
31 mA FBR12ND05FBR12ND05-P 5 VDC 178 ?28 mA 75% max.10% min.Approx.
Approx.
Approx.of nominal of nominal 0.14 W 0.08 W 20 deg FBR12ND06FBR12ND06-P 6 VDC 257 ?23 mA (at nominal
Max.voltage voltage voltage)
Max.
(at nominal FBR12ND09FBR12ND09-P 9 VDC 579 ?
15 mA voltage)FBR12ND12FBR12ND12-P 12 VDC 1,028 ?11 mA
FBR12ND24
FBR12ND24-P
24 VDC
2,880 ?
8 mA
0.2 W
0.112 W
30 deg
s COIL DATA CHART
*1: Specified values are subject to pulse wave voltage.Note:All values in the table are measured at 20°C.
MODEL
Nominal
Nominal Coil current Must Must Nominal Operate Coil resistance (at nominal
operate release temperature voltage
(±10%)
voltage)voltage*
1voltage*
1power
power
rise
Standard
-P type
approx.FBR12WD03FBR12WD03-P 3 VDC 39 ?77 mA FBR12WD04FBR12WD04-P 4.5 VDC 88 ?
51 mA FBR12WD05FBR12WD05-P 5 VDC 108 ?46 mA 75% max.10% min.Approx.
Approx.
Approx.of nominal of nominal 0.23 W 0.13 W 30 deg FBR12WD06FBR12WD06-P 6 VDC 156 ?38 mA (at nominal
(at nominal voltage voltage voltage)
Max.
voltage)
FBR12WD09FBR12WD09-P 9 VDC 352 ?
25 mA FBR12WD12FBR12WD12-P 12 VDC 626 ?19 mA FBR12WD24
FBR12WD24-P 24 VDC
2,304 ?
10 mA
0.25 W
0.14 W
33 deg
*1: Specified values are subject to pulse wave voltage.Note:All values in the table are measured at 20°C.
1.STANDARD
2.HIGH DIELECTRIC STRENGTH
MODEL
Nominal Coil
Must Must Nominal Operate Coil resistance operate release temperature voltage (±10%)
voltage*
1voltage*
1power
power
rise
Standard
-P type
FBR12HD03FBR12HD03-P 3 VDC 180 ?FBR12HD04FBR12HD04-P 4.5 VDC 405 ?FBR12HD05FBR12HD05-P 5 VDC 500 ? 80% max.10% min.Approx.
Approx.
Approx.of nominal of nominal 0.05 W 0.04 W 4 deg FBR12HD06FBR12HD06-P 6 VDC 720 ?(at nominal
(at nominal voltage voltage voltage)
Max.
voltage)
FBR12HD09FBR12HD09-P 9 VDC 1,620 ?FBR12HD12
FBR12HD12-P 12 VDC 2,880 ?
*1: Specified values are subject to pulse wave voltage.Note:All values in the table are measured at 20°C.
3. HIGH SENSITIVITY TYPE
R
N E
W
N
E S
N
N
s DIMENSIONS
Unit: mm s REFERENCE DATA
s CHARACTERISTIC DATA
Life curve
500
Contact load current (A)
50
5
10
1
100
(×104
S
e
r
v
i
c
e
l
i
f
e
(
o
p
e
r
a
t
i
o
n
s
)
0.5 1.0 1.5 2.0
Maximum switching capacity
Contact load voltage (V)
Range of operation temperature and voltage
Operating temperature (?C)
C
o
n
t
a
c
t
l
o
a
d
c
u
r
r
e
n
t
(
A
)
N
o
m
i
n
a
l
v
o
l
t
a
g
e
m
u
l
t
i
p
l
y
i
n
g
f
a
c
t
o
r
(
%
)
q Dimensions q Schematics
(BOTTOM VIEW)
q PC board mounting hole layout
30 pcs/Tube
±2
Distribution of operate and release voltage
Rated coil voltage multiplying factor (%)
60
50
40
20
30
10
01020304050607080
D
i
s
t
r
i
b
u
t
i
o
n
(
%
)
Distribution of operate and release time
Time (ms)
100
80
60
20
40
012345678
Contact resistance (m?)
Distribution of contact resistance
80
60
40
20
01020304050607080
D
i
s
t
r
i
b
u
t
i
o
n
(
%
)
D
i
s
t
r
i
b
u
t
i
o
n
(
%
)
N O
T F O R N E W D E S I G N F B R 12 S E R I E S
T O B E D I S C O N T I N I E D
? 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 07/26/2004.
Japan
Fujitsu Component Limited Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010Fax: (81-3) 5449-2626
Email: promothq@https://www.wendangku.net/doc/9d14776164.html, Web: https://www.wendangku.net/doc/9d14776164.html, North and South America
Fujitsu Components America, Inc.250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.Tel: (1-408) 745-4900Fax: (1-408) 745-4970
Email: marcom@https://www.wendangku.net/doc/9d14776164.html, Web: https://www.wendangku.net/doc/9d14776164.html,
Europe
Fujitsu Components Europe B.V.Diamantlaan 25
2132 WV Hoofddorp Netherlands
Tel: (31-23) 5560910Fax: (31-23) 5560950
Email: info.marketing@https://www.wendangku.net/doc/9d14776164.html, Web: https://www.wendangku.net/doc/9d14776164.html, Asia Pacific
Fujitsu Components Asia Ltd.102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex Singapore 118529Tel: (65) 375-8560Fax: (65) 273-3021
Email: fcal@https://www.wendangku.net/doc/9d14776164.html, https://www.wendangku.net/doc/9d14776164.html,
Fujitsu Components International Headquarter Offices