1/11
September 2002s QUIESCENT CURRENT SPECIF. UP TO 20V s
OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAYS
s
EQUIVALENT AC OUTPUT DRIVE FOR LIQUID CRYSTAL DISPLAYS - NO EXTERNAL CAPACITOR REQUIRED
s
VOLTAGE DOUBLING ACROSS DISPLAY [(V DD - V EE ) = 18V] RESULTS IN EFFECTIVE 36V (p-p) DRIVE ACROSS SELECTED DISPLAY SEGMENTS
s
LOW OR HIGH OUTPUT LEVEL DC DRIVE FOR OTHER TYPES OF DISPLAYS
s
ONE CHIP LOGIC LEVEL CONVERSION FOR DIFFERENT INPUT AND OUTPUT LEVEL SWINGS
s
FULL DECODING OF ALL INPUT
COMBINATIONS : "0 - 9, L, H, P , A" AND BLANK POSITIONS
s
INPUT LEAKAGE CURRENT
I I = 100nA (MAX) AT V DD = 18V T A = 25°C s 100% TESTED FOR QUIESCENT CURRENT s
MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES"
DESCRIPTION
HCF4054B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. HCF4054B provides level shifting similar to
HCF4055B and HCF4056B, independently strobed latches, and common DF control on 4signal lines. This device is intended to provide drive signal compatibility with HCF4055B and HCF4056B 7-segment decoder types for the decimal point, colon, polarity, and similar display lines. A level-shifted high amplitude DF output can be obtained from any HCF4054B output line by connecting the corresponding input and strobe lines to a low and high levels. HCF4054B may also be utilized for logic level "up conversion" or "down conversion" respectively. For example,input signal swings (V DD to V SS ) from +5V to 0V
HCF4054B
4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION
PIN CONNECTION
ORDER CODES
PACKAGE TUBE T & R
DIP HCF4054BEY SOP
HCF4054BM1
HCF4054M013TR
P
r o
d u c t (s ) -
O b
s o l e t e
P r o
d u c t (s
)
O
b s
o l e t e
P
r o
d u c t
(s ) -
O b
s o l e t e
P r o
d u c t (s
) HCF4054B
2/11
IINPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
TRUTH TABLE
X = Don’t Care.
(*) Depends upon the input mode previously applied when ST=1.
PIN No SYMBOL NAME AND FUNCTION 6, 5, 4, 3OUT1 to OUT4Outputs 9, 11, 13, 15IN1 to IN4Inputs 10, 12, 14, 1
STROBE1STROBE4Strobe Input
2DISPLAY FREQ. IN Display Frequency Input
7V EE
Negative Supply Voltage 8V SS Negative Supply Voltage 16
V DD
Positive Supply Voltage
DF IN STROBE
OUT L L H
L
H L H H L H H H H H H L X
X
L
*
can be converted to output signal swings (V DD to V EE ) of +5V to -5V. The level shifted function permits the use of different input and output signal swings. The input swings from a low level of V SS to a high level of V DD, while the outputs swings from a low level of V EE to the same high level of V DD . Thus, the input and output swings can be selected independently of each other over a 3 to 18V range. V SS may be connected to V EE when no level-shift function is required. Data is transferred from input to output by placing a high voltage level at the strobe input. A low voltage level at the strobe input latches the data input and the corresponding output segments remain selected (or non selected) while the strobe is low.
O
b s o
l e t e
P
r o
d u c t (
s ) -
O b
s o l e t e
P r o
HCF4054B
3/11
LOGIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied.
All voltage values are referred to V SS pin voltage.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter
Value Unit V DD Supply Voltage -0.5 to +22
V V I DC Input Voltage -0.5 to V DD + 0.5
V I I DC Input Current
± 10mA P D Power Dissipation per Package
200
mW Power Dissipation per Output Transistor 100
mW T op Operating Temperature -55 to +125°C T stg
Storage Temperature
-65 to +150
°C
Symbol Parameter Value Unit V DD Supply Voltage 3 to 20V V I
Input Voltage
0 to V DD V T op
Operating Temperature
-55 to 125
°C
O
b s
o l e t e
P
r o
d u c t (s )
- O b
s o l e t e
P r o
d u c t (s
) HCF4054B
4/11
DC SPECIFICATIONS
The Noise Margin for both "1" and "0" level is: 1V min. with V DD =5V, 2V min. with V DD =10V, 2.5V min. with V DD =15V
DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200K ?, t r = t f = 20 ns)
(*) Typical temperature coefficient for all V DD value is 0.3 %/°C.
Symbol
Parameter
Test Condition
Value
Unit V EE (V)V I (V)V O (V)
V SS (V)V DD (V)T A = 25°C -40 to 85°C -55 to 125°C Min.
Typ.
Max.Min.
Max.Min.
Max.I L
Quiescent Current
-50/5050.045150150μA
00/100100.0410********/150150.042060060000/200200.08100
3000
3000
V OH
High Level Output Voltage
00/505 4.95 4.95 4.95V
00/100109.959.959.9500/1501514.9514.95
14.95
V OL
Low Level Output Voltage
05/0050.050.050.05V
010/00100.050.050.05015/0
0150.050.050.05
V IH
High Level Input Voltage -50.5/4.505 3.5 3.5 3.5V
01/90107770 1.5/18.50151111
11
V IL
Low Level Input Voltage 50.5/4.505 1.5 1.5
1.5V
09/10103330 1.5/18.5015
4
4
4
I OH
Output Drive Current -50/5 4.505-0.38-0.9-0.28
-0.28mA
00/109.5010-0.38-0.9-0.28-0.2800/1513.5015-1.27-3-0.95-0.95I OL
Output Sink Current
-50/50.405 1.1 2.60.820.82mA
00/100.5010 1.1 2.60.820.8200/15 1.5015 2.9 6.8
2.17 2.17
I I
Input Leakage Current (any input)0
0/18
18±10-5±0.1
±1±1μA C I
Input Capacitance (any input)
5
7.5
pF
Symbol
Parameter
Test Condition
Value (*)Unit
V EE
(V)V SS (V)V DD (V)Min.
Typ.Max.t PHL t PLH Propagation Delay
Time (any Input to any Output)-505400800ns
00103406800015250500t THL t TLH Transition Time
(any Output)-505100200ns
0010100200001575150t setup
Data Setup Time
-505220110ns
00101005000157035t W
Strobe Pulse Width
-505220110ns
0010100500
15
70
35
HCF4054B TYPICAL APPLICATIONS
Display Driver Circuit.
Display Driver Waveform..
5/11
HCF4054B
Digital (0 to +5V) to Bidirectional Analog Control (+5V to -5V) Level Shifter.
Typical 3? Digit Crystal Display : (V DD = +5V, V SS = 0V, V EE = -10V, DF N = 30Hz Square)
6/11
c t HCF4054B
7/11
TEST CIRCUIT
L R L = 200K ?
R T = Z OUT of pulse generator (typically 50?)
WAVEFORM : DATA SETUP TIME AND STROBE PULSE DURATION (f=1MHz; 50% duty cycle )
O
b s
o l e t e
P
r o
d u c t (s ) -
O b
s o l e t e
P r o
d u c t (s
) HCF4054B
10/11
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
? The ST logo is a registered trademark of STMicroelectronics ? 2002 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco
Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
? https://www.wendangku.net/doc/b22986235.html,
分销商库存信息:
STM
HCF4054BEY HCF4054M013TR