冶金机械专业英语词汇
钢铁的制造
Manufacturing of Steel
连续铸造法 Continuous casting process
电炉 Electric furnace
均热炉 Soaking pit
全静钢 Killed steel
半静钢 Semi-killed steel
沸腾钢(未净钢) Rimmed steel
钢铁生产流程 Steel Production Flow Chart
钢材的熔铸、锻造、挤压及延轧
The Casting, Fogging, Extrusion, Rolling & Steel
熔铸 Casting
锻造 Fogging
挤压 Extrusion
延轧 Rolling
冲剪 Drawing & stamping
特殊钢 Special Steel
简介
General
特殊钢以原素分类
Classification of Special Steel according to Element
特殊钢以用途来分类
Classification of Special Steel according to End Usage
易车(快削)不锈钢
Free Cutting Stainless Steel
含铅易车钢
Leaded Free Cutting Steel
含硫易车钢
Sulphuric Free Cutting Steel
硬化性能
Hardenability
钢的脆性
Brittleness of Steel
低温脆性 Cold brittleness
回火脆性 Temper brittleness
日工标准下的特殊钢材
Specail Steel according to JIS Standard
铬钢 – 日工标准 JIS G4104
Chrome steel to JIS G4104
铬钼钢钢材 – 日工标准 G4105 62
Chrome Molybdenum steel to JIS G4105
镍铬 – 日工标准 G4102 63
Chrome Nickel steel to JIS G4102
镍铬钼钢 – 日工标准 G4103 64
Nickel, Chrome & Molybdenum Steel to JIS G4103
高锰钢铸 – 日工标准
High manganese steel to JIS standard
片及板材
Chapter Four-Strip, Steel & Plate
冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95
Cold Rolled (Low carbon) Steel Strip (to JIS G 3141)
简介
General
美材试标准的冷辘低碳钢片
Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM)
日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释
Decoding of cold rolled(Low carbon)steel strip JIS G3141
材料的加工性能 Drawing abillity
硬度 Hardness
表面处理 Surface finish
冷辘钢捆片及张片制作流程图表
Production flow chart cold rolled steel coil sheet
冷辘钢捆片及张片的电镀和印刷方法
Cold rolled steel coil & sheet electro-plating & painting method
冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表
End usages, industrial standard, quality, condition and hardness of cold rolled steel strip
硬度及拉力 Hardness & Tensile strength test
拉伸测试(顺纹测试)
Elongation test
杯突测试(厚度: 0.4公厘至1.6公厘，准确至0.1公厘 3个试片平均数)
Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm)
曲面(假曲率)
Camber
厚度及阔度公差 Tolerance on Thickness & Width
平坦度(阔度大于500公厘，标准回火)
Flatness (width>500mm, temper: standard)
弯度 Camber
冷辘钢片储存与处理提示
General advice on handling & storage of cold rolled steel coil & sheet
防止生锈
Rust Protection
生锈速度表
Speed of rusting
焊接 Welding
气焊 Gas Welding
埋弧焊 Submerged-arc Welding
电阻焊 Resistance Welding
冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况
Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2)
时间效应(老化)及拉伸应变
Aging & Stretcher Strains
日工标准(JIS G3141)冷辘钢片化学成份
Chemical composition – cold rolled steel sheet to JIS G3141
冷辘钢片的"理论重量"计算方程式
Cold Rolled Steel Sheet – Theoretical mass
日工标准(JIS G3141)冷辘钢片重量列表
Mass of Cold-Rolled Steel Sheet to JIS G3141
冷辘钢片订货需知
Ordering of cold rolled steel strip/sheet
其它日工标准冷轧钢片(用途及编号)
JIS standard & application of other cold Rolled Special Steel
电镀锌钢片或电解钢片
Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet
简介
General
电解/电镀锌大大增强钢片的防锈能力
Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet
上漆能力 Paint Adhesion
电镀锌钢片的焊接
Welding of Electro-galvanized steel sheet
点焊
Spot welding
滚焊
Seam welding
电镀锌(电解)钢片
Electro-galvanized Steel Sheet
生产流程
Production Flow Chart
常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度
Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet
锌镀层质量 Zinc Coating Mass
表面处理 Surface Treatment
冷轧钢片 Cold-Rolled Steel Sheet/Strip
热轧钢片 Hot-Rolled Sheet/Strip
电解冷轧钢片厚度公差
Thickness Tolerance of Electrolytic Cold-rolled sheet
热轧钢片厚度公差
Thickness Tolerance of Hot-rolled sheet
冷轧或热轧钢片阔度公差
Width Tolerance of Cold or Hot-rolled sheet
长度公差 Length Tolerance
理论质量 Theoretical Mass
锌镀层质量(两个相同锌镀层厚度)
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个不同锌镀层厚度)
Mass Calculation of coating (For differential coating)/MM
镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303)
简介
General
镀锡薄铁片的构造
Construction of Electrolytic Tinplate
镀锡薄钢片(白铁皮/马日铁)制造过程
Production Process of Electrolytic Tinplate
锡层质量
Mass of Tin Coating (JIS G3303-1987)
两面均等锡层
Both Side Equally Coated Mass
两面不均等锡层
Both Side Different Thickness Coated Mass
级别、电镀方法、镀层质量及常用称号
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
镀层质量标记
Markings & Designations of Differential Coatings
硬度 Hardness
单相轧压镀锡薄铁片(白铁皮/马口铁)
Single-Reduced Tinplate
双相辗压镀锡薄钢片(马口铁/白铁
皮)
Dual-Reduction Tinplate
钢的种类 Type of Steel
表面处理 Surface Finish
常用尺寸 Commonly Used Size
电器用硅 [硅] 钢片 Electrical Steel Sheet
简介 General
软磁材料 Soft Magnetic Material
滞后回线 Narrow Hystersis
矫顽磁力 Coercive Force
硬磁材料 Hard Magnetic Material
最大能量积 Maximum Energy Product
硅含量对电器用的低碳钢片的最大好处
The Advantage of Using Silicon low Carbon Steel
晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented)
Grain Oriented & Non-Oriented
电器用硅 [硅] 钢片的最终用途及规格
End Usage and Designations of Electrical Steel Strip
电器用的硅 [硅] 钢片之分类
Classification of Silicon Steel Sheet for Electrical Use
电器用钢片的绝缘涂层
Performance of Surface Insulation of Electrical Steel Sheets
晶粒取向电器用硅钢片主要工业标准
International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use
晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel
晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准)
Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard)
退火Annealing
电器用钢片用家需自行应力退火原因
Annealing of the Electrical Steel Sheet
退火时注意事项 Annealing Precautionary
碳污染 Prevent Carbon Contamination
热力应先从工件边缘透入
Heat from the Laminated Stacks Edges
提防过份氧化
No Excessive Oxidation
应力退火温度
Stress –relieving Annealing Temperature
晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能
Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差
Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain
Oriented Electrical Steel Sheets
晶粒取向电器用硅(硅)钢片 – 高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之标准尺寸及包装
Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain-
Oriented Electrical Steel Sheets
绝缘表面 Surface Insulation
非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系
数
Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical
电器及家电外壳用镀层冷辘 [低碳] 钢片
Coated (Low Carbon) Steel Sheets for Casing,Electricals & Home Appliances
镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet
简介 General
镀铝硅合金钢片的特色
Feature of Aluminized Silicon Alloy Steel Sheet
用途
End Usages
抗化学品能力
Chemical Resistance
镀铝(硅)钢片 – 日工标准(JIS G3314)
Hot-aluminum-coated sheets and coils to JIS G 3314
镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能
Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils
公差 Size Tolerance
镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较
Comparsion of various resistance of aluminized steel & other kinds of steel
镀铝(硅)钢片生产流程
Aluminum Steel Sheet, Production Flow Chart
焊接能力 Weldability
镀铝钢片的焊接状态(比较冷辘钢片)
Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip
钢板
Steel Plate
钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准
Type of steel Plate & Related JIS, ASTM and Other Major Industrial Standards
钢板生产流程
Production Flow Chart
钢板订货需知
Ordering of Steel Plate
不锈钢
Stainless Steel
不锈钢的定义 Definition of Stainless Steel
不锈钢之分类，耐腐蚀性及耐热性
Classification, Corrosion Resistant & Heat Resistance of Stainless Steel
铁铬系不锈钢片
Chrome Stainless Steel
马氏体不锈钢
Martensite Stainless Steel
低碳马氏体不锈钢
Low Carbon Martensite Stainless Steel
含铁体不锈钢
Ferrite Stainless Steel
镍铬系不锈钢
Nickel Chrome Stainless Steel
释出硬化不锈钢
Precipitation Hardening Stainless Steel
铁锰铝不锈钢
Fe / Mn / Al / Stainless Steel
不锈钢的磁性
Magnetic Property & Stainless Steel
不锈钢箔、卷片、片及板之厚度分类
Classification of Foil, Strip, Sheet & Plate by Thickness
表面保护胶纸
Surface protection film
不锈钢片材常用代号
Designation of SUS Steel Special Use Stainless
表面处理 Surface finish
薄卷片及薄片(0.3至2.9mm厚之片)机械性能
Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet
不锈钢片机械性能(301, 304, 631, CSP)
Mechanical Properties of Spring use Stainless Steel
不锈钢 – 种类，工业标准，化学成份，特点及 主要用途
Stainless Steel – Type, Industrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel
不锈钢薄片用途例
End Usage of Thinner Gauge
不锈钢片、板用途例
Examples of End Usages of Strip, Sheet & Plate
不锈钢应力退火卷片常用规格名词图解
General Specif
ication of Tension Annealed Stainless Steel Strips
耐热不锈钢
Heat-Resistance Stainless Steel
镍铬系耐热不锈钢特性、化学成份、及操作温度
Heat-Resistance Stainless Steel
铬系耐热钢
Chrome Heat Resistance Steel
镍铬耐热钢
Ni - Cr Heat Resistance Steel
超耐热钢
Special Heat Resistance Steel
抗热超级合金
Heat Resistance Super Alloy
耐热不锈钢比重表
Specific Gravity of Heat – resistance steel plates and sheets stainless steel
不锈钢材及耐热钢材标准对照表
Stainless and Heat-Resisting Steels
高碳钢片 High Carbon Steel Strip
分类
Classification
用组织结构分类
Classification According to Grain Structure
用含碳量分类 – 即低碳钢、中碳钢及高碳钢
Classification According to Carbon Contains
弹簧用碳钢片
CarbonSteel Strip For Spring Use
冷轧状态 Cold Rolled Strip
回火状态 Annealed Strip
淬火及回火状态
Hardened & Tempered Strip/ Precision – Quenched Steel Strip
贝氏体钢片 Bainite Steel Strip
弹簧用碳钢片材之边缘处理 Edge Finished
淬火剂
Quenching Media
碳钢回火 Tempering
回火有低温回火及高温回火
Low & High Temperature Tempering
高温回火
High Temperature Tempering
退火 Annealing
完全退火 Full Annealing
扩散退火 Diffusion Annealing
低温退火 Low Temperature Annealing
中途退火 Process Annealing
球化退火 Spheroidizing Annealing
光辉退火 Bright Annealing
淬火 Quenching
时间淬火 Time Quenching
奥氏铁孻回火 Austempering
马氏铁体淬火 Marquenching
高碳钢片用途 End Usage of High Carbon Steel Strip
冷轧高碳钢 – 日本工业标准
Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311
电镀金属钢片 Plate Metal Strip
简介 General
电镀金属捆片的优点
Advantage of Using Plate Metal Strip
金属捆片电镀层
Plated Layer of Plated Metal Strip
镀镍 Nickel Plated
镀铬 Chrome Plated
镀黄铜 Brass Plated
基层金属 Base Metal of Plated Metal Strip
低碳钢或铁基层金属
Iron & Low Carbon as Base Metal
不锈钢基层金属 Stainless Steel as Base Metal
铜基层金属
Copper as Base Metal
黄铜基层金属
Brass as Base Metal
轴承合金 Bearing Alloy