Description
These non-diffused lamps are designed to produce a bright light source and smooth radiation
pattern. A slight tint is added to the lens for easy color identification.This lamp has been designed with a
HLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223,HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515,HLMP-C523, HLMP-C615, HLMP-C623
Features
?Very high intensity ?Exceptional uniformity ?Microtint lens for color identification
?Consistent viewability All colors: AlGaAs Red
High Efficiency Red Yellow Orange Green
Emerald Green ?15° and 25° family
?Tape and reel options available ?Binned for color and intensity Applications
?Ideal for backlighting front panels*?Used for lighting switches ?Adapted for indoor and outdoor signs
Agilent
T-13/4 Super Ultra-Bright LED Lamps
Data Sheet
20mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.
Selection Guide
Part Number Luminous Intensity Iv (mcd) Color2θ1/2[1]Standoff Leads HLMP-Min.Max.
DH AS AlGaAs15No C115290.0–
C115-O00xx290.0–
C115-OP0xx290.01000.0
Yes C117-OP0xx290.01000.0
25No C12390.2–
C123-L00xx90.2–
Red15No C215138.0–
C215-M00xx138.0–
C215-MN0xx138.0400.0
25No C22390.2–
C223-L00xx90.2–
C223-MN0xx138.0400.0 Yellow15No C315147.0–
C315-L00xx147.0–
C315-LM0xx147.0424.0
25No C32396.2–
C323-K00xx96.2–
C323-KL0xx96.2294.0 Orange15No C415138.0–
C415-M00xx138.0–
C415-M0D0xx138.0–
C415-MN0xx138.0400.0
25No C42390.2–
C423-L00xx90.2–
C423-LM0xx90.2276.0 Green15No C515170.0–
C515-L00xx170.0
C515-LM0xx170.0490.0
25No C52369.8–
C523-J00xx69.8–
C523-KL0xx111.7340.0 Emerald Green15No C61517.0–
C615-G00xx17.0–
25No C623 6.7–
C623-E00xx 6.7–
Part Numbering System
HLMP - C x xx - x x x xx
Mechanical Options
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B2: Right Angle Housing, Even Leads
UQ: Ammo Pack, Horizontal Leads
Color Bin Options
0: Full Color Bin Distribution
D: Color Bins 4 & 5 only
Maximum Iv Bin Options
0: Open (No Maximum Limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle & Standoffs Options
15: 15 Degree, without Standoffs
17: 15 Degree, with Standoffs
23: 25 Degree, without Standoffs
Color Options
1. AS AlGaAs Red
2. High Efficiency Red
3. Yellow
4. Orange
5. Green
6. Emerald Green
Package Options
C: T-1 3/4 (5 mm)
Absolute Maximum Ratings at T A = 25°C
High
High
DH AS Efficiency Performance AlGaAs Red and Green and Parameter
Red Orange Yellow Emerald Green Units DC Forward Current [1]
30302030mA Transient Forward Current [2]500500
500500mA (10 μsec Pulse)
Reverse Voltage (Ir = 100 μA)5555V LED Junction Temperature 110
110110110
°C Operating Temperature Range –20 to +100
–55 to +100–20 to +100
°C Storage Temperature Range –55 to +100°C
Wave Soldering Temperature 250°C for 3 seconds [1.59 mm (0.063 in.) from body]Lead Solder Dipping Temperature 260°C for 5 seconds
[1.59 mm (0.063 in.) from body]
Notes:
1. See Figure 5 for maximum current derating vs. ambient temperature.
2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.
Package Dimensions
HLMP-Cx15 and HLMP-Cx23HLMP-Cx17
(0.039)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS.
± 0.20± 0.008)
Electrical Characteristics at T A = 25°C
Forward Reverse Capacitance Speed of Response
Voltage Breakdown C (pF)Thermalτs (ns)
Vf (Volts)Vr (Volts)Vf = 0Resistance Time Constant
@ If = 20 mA@ Ir = 100 μA f = 1 MHz RθJ-PIN e-t/τs
Part Number Typ.Max.Min.Typ.(°C/W)Typ.
HLMP-C115 1.8 2.253021030
HLMP-C117
HLMP-C123
HLMP-C215 1.9 2.651121090
HLMP-C223
HLMP-C315 2.1 2.651521090
HLMP-C323
HLMP-C415 1.9 2.654210280
HLMP-C423
HLMP-C515 2.2 3.0518210260
HLMP-C523
HLMP-C615 2.2 3.0518210260
HLMP-C623
Optical Characteristics at T A = 25°C
Luminous Color,Viewing
Intensity Peak Dominant Angle Luminous
Iv (mcd)Wavelength Wavelength2θ1/2Efficacy
@ 20 mA[1]λpeak (nm)λd[2] (nm)(Degrees)[3]ηv
Part Number Min.Typ.Typ.Typ.Typ.(lm/w) HLMP-C1152906006456371180
HLMP-C117
HLMP-C1239020026
HLMP-C21513830063562617145
9017023
HLMP-C31514630058358517500
9617025
HLMP-C41513830060060217380
9017023
HLMP-C51517030056857020595
6917028
HLMP-C615174555856020656
62728
Notes:
1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
Figure 1. Relative intensity vs. wavelength.
Figure 2. Forward current vs. forward voltage (non-resistor lamp).
Figure 3. Relative luminous intensity vs. forward current.
WAVELENGTH – nm
R E L A T I V E I N T E N S I T Y
1.0
0.5
0I F – F O R W A R D
C U R R E N T – m A
V F – FORWARD VOLTAGE – V
I F – F O R W A R D C U R R E N T – m A
V F – FORWARD VOLTAGE – V
HIGH EFFICIENCY RED, ORANGE,YELLOW, AND HIGH PERFORMANCE
GREEN, EMERALD GREEN
R E L A T I V E L U M I N O U S I N T
E N S I T Y (N O R M A L I Z E D A T 20 m A )
I F – DC FORWARD CURRENT – mA R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 20 m A )
0I DC – DC CURRENT PER LED – mA
10
20
1.6
0.80.45
15
30
1.225
0.20.61.01.4HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN
Figure 5. Maximum forward dc current vs. ambient temperature. Derating based on T j MAX = 110°C.
Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.
Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family.
R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )
0I PEAK – PEAK FORWARD CURRENT – mA
0.60.8300
201001.2
1.0
0.20.45020010DH As AlGaAs RED
ηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )
I PEAK – PEAK FORWARD CURRENT – mA
HER, ORANGE, YELLOW, HIGH
PERFORMANCE GREEN, EMERALD GREEN
I F – F O R W A R D C U R R E N
T – m A
T A – AMBIENT TEMPERATURE – °C DH As AlGaAs RED
I F – F O R W A R D C U R R E N T – m A
T A – AMBIENT TEMPERATURE – °C
HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN N O R M A L I Z E D L U M I N O U S I N T E N S I T Y
1
0ANGULAR DISPLACEMENT – DEGREES
0.80.60.50.70.245
0.10.30.440
35
30
25
20
10
5
15
-5-10-15-20-25-30-35-40-45
0.9
Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family.
Intensity Bin Limits Intensity Range (mcd)Color
Bin Min.Max.L 101.5162.4M 162.4234.6N 234.6340.0O 340.0540.0P 540.0850.0Q 850.01200.0R 1200.01700.0Red/Orange
S 1700.02400.0T 2400.03400.0U 3400.04900.0V 4900.07100.0W 7100.010200.0X 10200.014800.0Y 14800.021400.0Z 21400.030900.0L 173.2250.0M 250.0360.0N 360.0510.0O 510.0800.0P 800.01250.0Yellow
Q 1250.01800.0R 1800.02900.0S 2900.04700.0T 4700.07200.0U 7200.011700.0V 11700.018000.0W
18000.027000.0
N O R M A L I Z E D L U M I N O U S I N T E N S I T Y
1
0ANGULAR DISPLACEMENT – DEGREES
0.80.60.50.70.245
0.10.30.440
35
30
25
20
10
5
15
-5-10-15-20-25-30-35-40-45
0.9
Intensity Bin Limits, continued
Intensity Range (mcd) Color Bin Min.Max.
E7.612.0
F12.019.1
G19.130.7
H30.749.1
I49.178.5
J78.5125.7
K125.7201.1
L201.1289.0 Green/M289.0417.0 Emerald Green N417.0680.0
O680.01100.0
P1100.01800.0
Q1800.02700.0
R2700.04300.0
S4300.06800.0
T6800.010800.0
U10800.016000.0
V16000.025000.0
W25000.040000.0 Maximum tolerance for each bin limit is ± 18%.
Color Categories
Lambda (nm)
Color Category #Min.Max.
6561.5564.5
5564.5567.5 Green4567.5570.5
3570.5573.5
2573.5576.5
1582.0584.5
3584.5587.0 Yellow2587.0589.5
4589.5592.0
5592.0593.0
1597.0599.5
2599.5602.0
3602.0604.5 Orange4604.5607.5
5607.5610.5
6610.5613.5
7613.5616.5
8616.5619.5 Tolerance for each bin limit is ± 0.5 nm.
Mechanical Option Matrix
Mechanical Option Code Definition
00Bulk Packaging, minimum increment 500 pcs/bag
01Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
02Tape & Reel, straight leads, minimum increment 1300 pcs/bag
B2Right Angle Housing, even leads, minimum increment 500 pcs/bag
UQ Ammo Pack, horizontal leads, in 1K minimum increment
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.
https://www.wendangku.net/doc/c64086591.html,/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/Interna-
tional), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright ? 2004 Agilent Technologies, Inc.
Obsoletes 5965-6165E
November 11, 2004
5988-2149EN