? Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
+Small compact design for pcb mounting + Auto 625/525 operation +8 bit RGB output +Fully filtered outputs
+Separate mixed syncs
+
Reclocked SD outputs available.
+
RsGsBs (Combined sync) available.
This interface card accepts D1 serial digits and provides all the necessary filtered analogue signals required for 8-bit monitoring on a pcb mounting module.Input Requirements
Input
1 x 270 Mb/s serial NRZI
(EBU TECH3267, SMPTE RP-259M)Input Impedance 75 ohm terminating
Line standard 625/50 or 525/60 Auto detection Equalisation
Automatic up to 40 dB at 200 MHz (Typically 300m of Belden 8281 at 270mb/s )Output Characteristics
Output format Either RGB or RsGsBs (As requested.)Output levels
700 mV ± 1% not including syncs Output Impedance 75 ohms
Resolution 8 bit data / 9 bit DAC Freq Response < 0.3 dB to 5.5 MHz Noise
> 60 dB rms to 5.5 MHz Sync Output Characteristics
Sync output amplitude 2V± 5% into 75 ohm
Sync amp. on RsGsBs 300 mV ± 10 mV into 75 ohm Other parameters
Power
+5V ± 0.25V (500 mA max)- 5V ± 0.50V (50 mA max)
Operating Temperature 00C to 400C Aqueous Washable Yes
Package
DR00167A
ORDERING CODES Reclocked o/p’s
RGB o/p
RsGsBs o/p
SDI-002A x √x SDI-002B √√x SDI-002C x x √SDI-002D √x √
SDI-002
SERIAL D1 TO RGB MODULE
PACKAGE DETAIL
Faraday Technology Ltd.Tel:+ 44 (0)1782 661501 Croft Road Industrial Estate,Fax:+ 44 (0)1782 630101 Newcastle, Staffordshire Email:sales@https://www.wendangku.net/doc/ec2467403.html, ST5 0QZ. England.Web site:https://www.wendangku.net/doc/ec2467403.html,