BYD473QE发动机结构图册

YC6J245-30(J61LA)柴油机零件图册

YC6J245-30(J61LA)柴油机零件图册 Parts Catalogue of YC6J245-30(J61LA) Diesel Engine 广西玉柴机器股份有限公司 Guangxi Yuchai Machinery Co., Ltd.

前言 Foreword 感谢您选用广西玉柴机器股份有限公司的产品，并感谢您阅读《YC6J-30(J61LA)柴油机零件图册》！ Thanks for using Yuchai engine and reading the “Parts Catalogue of YC6J-30(J61LA)Diesel Engine”! 玉柴的服务宗旨是：“倾我所有、尽我所能、竭诚用户、诚信天下”,为了更好地履行玉柴的服务宗旨，我们编印了《YC6J-30(J61LA)柴油机零件图册》，希望本图册可以让用户更好地认识了解玉柴产品的结构与配置，方便用户使用、维修和购置零配件。 With the aim to fulfill our company service tenet, i.e. “striving all out to serve the customers, spending full sincerity to confidence the world”, we compiled and printed th is “Parts Catalogue of YC6J-30(J61LA) Diesel Engine”. We hope this “Parts Catalogue of YC6J-30(J61LA) Diesel Engine” will help you to understand the structure and configuration of Yuchai’s YC6J-30(J61LA) diesel engines, so to operate and maintain them easily. 本零件图册是根据相关生产图样、资料编制而成的。图册中列出了YC6J-30(J61LA)柴油机的全部零部件目录。 This “Parts Catalogue of YC6J-30(J61LA) Diesel Engine” is compiled by basing on the production samples and technical documents, and covers the engine model of YC6J-30(J61LA) diesel engine. 随着产品的不断改进提高和用户不断提出新的要求，《YC6J-30(J61LA)柴油机零件图册》中的有关内容将会有不同程度的变更，玉柴保留在不预先通知的情况下进行修改的权利，具体配置情况应以当时产品技术文件为依据。 As production improvements and consumer’s requirements are constantly brought up, the content of th is “Parts Catalogue of YC6J-30(J61LA) Diesel Engine” must be changed at a certain extent, which Yuchai reserves the right to modify without formal notification beforehand. The engine’s idiographic configuration is according to its technical documents. 本零件图册编写不足之处在所难免，敬请多多指教，使之渐臻完善。谢谢！ Deficiencies may appear in thi s “Part Catalogue of YC6J-30(J61LA)Diesel Engine”, and your comments and suggestions are appreciated honestly! 广西玉柴机器股份有限公司 Guangxi Yuchai Machinery Co. Ltd.

云内发动机4100QBZ零件图册中文

GB/T19001—idt ISO 9001 4100QBZ型柴油机零件图册 昆明云内动力股份有限公司

目录 1、机体总成（一）.................................................................................................................................. 错误！未定义书签。 2、机体总成（二）.................................................................................................................................. 错误！未定义书签。 3、气缸盖总成.......................................................................................................................................... 错误！未定义书签。 4、活塞连杆总成...................................................................................................................................... 错误！未定义书签。 5、曲轴与飞轮总成.................................................................................................................................. 错误！未定义书签。 6、凸轮轴总成.......................................................................................................................................... 错误！未定义书签。 7、配气机构.............................................................................................................................................. 错误！未定义书签。 8、传动系统.............................................................................................................................................. 错误！未定义书签。 9、进排气系统.......................................................................................................................................... 错误！未定义书签。 10、油底壳部件........................................................................................................................................ 错误！未定义书签。 11、增压润滑系统.................................................................................................................................... 错误！未定义书签。 12、机油泵总成........................................................................................................................................ 错误！未定义书签。 13、风扇、水泵总成................................................................................................................................ 错误！未定义书签。 14、冷却水路............................................................................................................................................ 错误！未定义书签。 15、电器系统............................................................................................................................................ 错误！未定义书签。 16、燃油管路总成.................................................................................................................................... 错误！未定义书签。 17、空气压缩机部件（带空气压缩机专用）........................................................................................ 错误！未定义书签。 18、动力转向泵部件................................................................................................................................ 错误！未定义书签。

比亚迪图册图解,发动机

BYDF6乘用车结构图册 - 37 - 目 录 4G69S4M 发动机 一、 摇臂盖 ·························································································································· 二、 气缸盖 ·························································································································· 三、 气缸体 ·························································································································· 四、 后盖板 ·························································································································· 五、 油底壳 ·························································································································· 六、 活塞及曲轴 ···················································································································· 七、 正时齿轮和皮带 ·············································································································· 八、 凸轮轴与气门 ················································································································· 九、 平衡轴 ·························································································································· 十、 机油压力开关 ················································································································· 十一、 发动机支承 ················································································································ 十二、 机油泵与机油滤清器 ···································································································· 十三、 喷油器及节气门体 ······································································································· 十四、 水泵 ························································································································· 十五、 水管及节温器 ············································································································· 十六、 空气滤清器 ················································································································ 十七、 进气岐管 ··················································································································· 十八、 排气歧管 ··················································································································· 十九、 排放控制 ···················································································································

4102QB柴油机零部件图册

昆明云内动力股份有限公司 KUNMING YUNNEI POWER CO., LTD.

公司简介 昆明云内动力股份有限公司襄樊销售服务中心是国家大一型企业，是国家重点扶持的520户企业及目前国内最大的多缸小缸径柴油机生产厂家之一；1999～2001年，连续三年在全国车用柴油机产销量排名中列第三位；2001年，成功地购并了成都内燃总厂，成立“成都云内动力有限公司”，进而成为西南地区最大的多缸小缸径柴油机生产基地。拥有德国KW气流预紧式高压多触头铸造生产线、GF气冲铸造生产线、V+S热芯盒射芯机及直读光谱仪等设备，可有效控制高强度薄壁铸件的生产质量；具备十余条能够实现系列产品共线生产的关键机械加工生产线和关键检测设备。 我公司主要产品包括100B系列的2100QB、3100QB、4100QB、4100QB-1A、4100QB-2、4100QBZ、4100QBZL、5100QB、5100QBZ和102B系列的4102QB、4102QBZ、4102QBZL等12种基本型，以及490、493、495三种基本系列，功率范围为23.5～87KW。其中的100B、102B系列柴油机为国内中小缸径多缸柴油机中最先采用直喷技术的产品；4100QBZ是国内率先研制成功并投放市场的小缸径增压柴油机；4100QBZ和4102QBZ分别获得了《九八年国家新产品》证书及《国家重点新产品》证书；2000年底公司成功开发的5100QB及5100QBZ柴油机被列为2000年度“国家级新产品”，并获得了《2001年国家重点新产品》证书。各基本型产品通过变化选装件形成了近300余种变型机型，以满足用户各种层次的使用需求，是0.5～3.75吨级农用车、轻型载货汽车、轻型客车及工程机械的理想配套动力。 我公司建立和健全了持续有效的质量保证体系，于1998年7月通过了ISO9001质量体系认证，为产品质量控制提供了可靠的保障。 近年来，通过对先进技术、设备、管理手段的应用以及加强产学研各方面的紧密结合，我公司的技术创新能力得到了极大的提高。1999年，公司技术中心被确认为云南省企业技术中心并与北京理工大学共建了“内燃机工程中心”；2000年，公司被认定为国家“863/CIMS应用示范企业”和“高新技术企业”并与昆明理工大学联合建立“发动机产品研究与开发试验中心”。 在开发新品、生产精品的同时，公司还积极开展营销网络体系的建设，在全国设立了32个销售服务中心和600余个技术服务站，为用户提供及时的、全方位的服务。

柳工挖掘机零件图册

目录 CONTENTS 柴油机系统Engine System (1) 驾驶室总成Cab Assembly (10) 主液压系统Main Hydraulic System (20) 工作装置管路总成Front Piping (37) 先导液压系统Pilot Hydraulic System (46) 行走液压系统Travel Hydraulic System (58) 履带行走系统Travel System (60) 回转平台总成Frame Assemble (65) 工作装置Working Equipment (67) 机罩总成Cover Assembly (73) 空调系统Air Conditioner Assembly (79) 电气系统Electric System (87)

00E0084 柴油机系统-密封件Engine System-Seal 标号代号名称数量备注Fig.N o.Part No. Part Name Qty. Remark 1 85A0103 海绵Sponge 1 2 85A0104 海绵Sponge 2 3 85A0198 海绵Sponge 1 4 85A010 5 海绵Sponge 1 5 85A0199 海绵Sponge 1 6 00B0015 螺栓M10X25-8.8-Zn.D Bost 5 GB5783-86 7 06B0002 垫圈10 Lock Washer 5 GB93-87 8 06B0001 垫圈10-140HV-Zn.D Washer 5 GB97.1-85 9 20A1576 弯板Plane 1

标号代号名称数量备注 F i g.N o.Part No. Part Name Qty. Remark 1 40C0038 发动机Engine 1 B3.3 2 04A0192 法兰Flange 1 3 06B0002 垫圈10 Lock Washer 2 4 GB93-87 4 00B0019 螺栓M10X30-8.8-Zn.D Bolt 20 GB5783-86 5 40C0097 联轴器Coupling 1 6 06B0001 垫圈10-140HV-Zn.D Washer 12 GB97.1-85 7 01B0016 螺栓M10X40-8.8-Zn.D Bolt 8 GB5783-86 8 03B0292 螺母M16-10-Zn.D Nut 2 GB6170-86 9 06B0015 垫圈16 Lock Washer 2 GB93-87 10 71A0120 支座Bracket 2 11 71A0121 支座Bracket 2 12 06B0008 垫圈12 Lock Washer 8 GB93-87 13 00B0035 螺栓M12X35-8.8-Zn.D Bolt 8 GB5783-86 14 17B0097 减震器Rubber ad 2 15 11A0659 板 Plane 2 16 00B0214 螺栓M16X130-10.9-Zn.D Bolt 2 GB5782-86 17 71A0122 支座Bracket 1 18 03B0003 螺母M12-8-Zn.D Nut 2 GB6170-86 19 06B0178 淬硬垫圈Lock Washer 2 20 17B0096 减震器Rubber ad 2 21 01B0103 螺栓M12X80-8.8-Zn.D Bolt 2 GB5782-86 22 32A0149 软管Hose 1 23 09C0029 软管卡箍φ40～φ64 Clamp 2 43828C 24 71A0123 支座Bracket 1 25 40C0096 风扇 Fan 1 26 06B0006 垫圈8 Lock Washer 8 GB93-87 27 00B0085 螺栓M8X25-8.8-Zn.D Bolt 4 GB5783-86 28 06B0005 垫圈8-140HV-Zn.D Washer 8 GB97.1-85 29 04B0174 螺钉M8X30-8.8-Zn.D Screw 4 GB70-85 30 56A0202 垫块Flange 1 31 09C0079 软管卡箍φ27～φ51 Clamp 2 43828B 32 32A0147 软管Hose 1 33 53C0044 柴油滤芯Filter 1 C6003112110 34 01A0305 弯管Hose 1 35 00B0012 螺栓M10X25-8.8-Zn.D Bolt 4 GB5783-86 36 53C0043 机油滤芯Filter 1 C6002112110

日产天籁发动机维修手册

日产天籁发动机维修手册 （一）机械系统 一．概述 1. VQ35DE 3.5升的VQ35DE发动机额定功率为170KW/5600rpm，最大扭矩333Nm/2800rpm,具有良好的加速性与车辆的驾驶性。该发动机必须使用至少95 号的高质量无铅汽油，如果没有高质量无铅汽油，91 号以上的常规无铅汽油也可以使用，但发动机性能会有所下降。为了获得最佳发动机性能和最佳驾驶性，推荐使用高质量的无铅汽油。 NOx废气排放已经通过ECM，根据传感器信号和ECU内部数据图，可以得到严格控制，因此VQ35DE 发动机取消了早期A33 车VQ30DE 发动机所采用的EGR 阀。 2. 发动机布置和机械特性： VQ35DE是顶置双凸轮轴、24气门发动机，是以新款350Z的发动机为基础的，作了一些改进，以使发动机扭矩输出平滑；在低速时也有较大的扭矩输出，以适应变速箱性能及前轮驱动的结构。 3.5 升的VQ35DE 发动机特点是铝缸体、铝缸盖。曲轴轴颈和凸轮轴凸缘是经过精细加工，这样可减小摩擦系数；活塞表面通过镀钼以降低摩擦；连杆呈锥形设计，在小端（连接活塞端）变窄以减小重量；连杆轴承盖与连杆主体之间的连接是通过螺栓拧入连杆主体的螺孔中，不再需要螺帽，这种设计可减轻重量，与QR 系列发动机一样。 3. 缸盖 VQ35DE 发动机采用铝缸盖，采用无调整垫片的挺柱，使发动机零件数减少。气门挺柱由耐磨钢制成，因此不是常规维护项目，不需要经常调整。气门锁片由铝合金制成，可以减轻重量。挺柱的侧面呈桶形状，类似第1 道活塞环的结构，以便于将其从缸盖中取出。 有一系列不同尺寸的气门挺柱可供选择，气门间隙的调整是通过更换合适高度尺寸的挺柱来完成的。因为发动机前端盖需拆下，才能对正时链轮进行操作，所以其工作量较大且较专业。在更换气门挺柱时，下列零件必须拆下： 驱动皮带曲轴皮带轮油底壳 正时链盖正时链 进气集气管气门室盖 凸轮轴气门挺柱 重装所拆件，并检查气门间隙。 4. C-VTC 连续可变进气正时控制 VQ35DE 发动机采用C-VTC 连续可变进气门正时控制系统，进气凸轮轴装有叶片式C-VTC控制执行器，与QR、QG发动机设计类似。进气门正时控制电磁阀装在缸盖两侧凸轮轴的第一支架上，电磁阀控制油压流入可变气门正时控制活塞两侧，可提前或推后进气门正时。下列是C-VTC 工作油流图

汽车构造发动机零件图

YN33CR电控高压共轨柴油机 YN33CR Electronic-controlled, High Pressure and Common Rail Diesel Engine 零件图册 Parts Catalogue 文件编号(File Number)：J15-YN33CR-2008.001 昆明云内动力股份有限公司 KUNMING YUNNEI POWER CO., LTD.

目录 contents 1. 机体部件Cylinder Block Assy. (1) 2. 正时齿轮室部件Timing gear chamber components. (7) 3. 缸盖部件Cylinderhead Assy. (10) 4. 活塞连杆总成Piston conrod Assy. (13) 5. 曲轴飞轮离合器总成Crankshaft flywheel clutch Assy. (15) 6. 润滑系统Lubricative System. (17) 7. 油底壳部件Oil sump Assembly. (19) 8. 共轨系统CRS. System. (21) 9. 进气系统Intake System (24) 10. 排气系统Exhaust System. (26) 11. 冷却系统Cooling System. (29) 12. 配气机构Valve train. (36) 13. 起动系统Start system. (39) 14. 空压机部件Compressor System. (42)

1. 机体部件Cylinder Block Assy. 24 27

4102GBZ柴油机零件图册(基础型IB044状态)_YN33GBZ YN38GBZ分析

龙工IB044B柴油机零件图册IB044B Diesel Engine Parts Catalogue 文件编号(File Number)：J15-4102GBZ-022B-2015.001 昆明云内动力股份有限公司 KUNMING YUNNEI POWER CO., LTD. 2015年3月

目录contents 1. 机体部件1 Cylinder Block Assy. 1 (1) 2. 机体部件2 Cylinder Block Assy. 2 (3) 3. 机体部件3 ylinder Block Assy. 3 (5) 4. 正时齿轮室部件Timing gear chamber components. (7) 5．离合器壳部件Clutch housing Assy. (9) 6. 缸盖部件Cylinderhead Assy. (11) 7. 活塞连杆总成 Piston conrod Assy. (13) 8. 曲轴飞轮离合器总成 Crankshaft flywheel clutch Assy. (15) 9. 机油泵部件 Oil pump assy. (17) 10. 油底壳部件 Oil sump Assy. (19) 11.燃油系统 fuel system. (21) 12. 机滤器部件 oil filter assy． (23) 13. 进气系统 Intake System． (25) 14．排气系统 Exhaust System. (28) 15．缸盖前盖板和节温器盖部件Cylinder head front cover and thermostat cover Assy. (32) 16. 风扇、水泵部件 Fan and water pump Assy. (34) 17. 机油冷器及放水开关部件 Oil cooler and water drain cock Assy. (36) 18. 配气机构 Valve train. (38) 19. 起动系统 Start System. (41) 20．.空气压缩机部件．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．44

495BPG零件图册

前言 本目录印制的目的是为了便于用户使用,它包括了495BPG、A495BPG、495BT、A495BT柴油机所有零件,但具体到每一厂家配套变型,个别零部件会与图册不一致。请按发动机订货号向本公司技术中心查询,查询电话:0575-********。 当用户需要订购495BPG、A495BPG、495BT、A495BT柴油机零件时,必需注明以下内容: 1.用户发动机型号及系列号。 2.所需零件在目录中的部件号。 3.所需零件的名称和数量。 4.本图册中的495BT、A495BT以拖拉机为主,用于联合收割机的专用零件见附表。 本目录中的零件均根据2005年设计而编制。之后的设计更新会在再版中反映。 2008年7月 PREFACE This catalogue is published with the aim of offering convenience to the customers.It includes all parts of the engine model495BPG、A495BPG、495BT、A495BT and495BT. However,some parts could be not identical in the catalogue,because several parts are designed for some special individual consumers.These parts are able to be got support by contact our customer service. On placing orders for the parts of495BPG、A495BPG、495BT and A495BT engine,the customers are requested to offer the following notes: 1.The model of your engine and its serial number. 2.The part number indicated in this catalogue. 3.The name and quantity of the part required. 4.Model495BT and A495BT in the catalogue is mainly for tractors,parts for combine harvester could be referenced by appendix. Drawing of the parts in this catalogue are made according to the design in2005.Further changes of the design will be reflected in the next edition. July/2008

云内发动机4100QBZ零件图册中文

文档来源为:从网络收集整理.word版本可编辑.欢迎下载支持. GB/T19001—idt ISO 9001 4100QBZ型柴油机零件图册昆明云内动力股份有限公司

目录 1、机体总成（一）.................................................................................................................................... 错误!未定义书签。 2、机体总成（二）.................................................................................................................................... 错误!未定义书签。 3、气缸盖总成............................................................................................................................................ 错误!未定义书签。 4、活塞连杆总成........................................................................................................................................ 错误!未定义书签。 5、曲轴与飞轮总成.................................................................................................................................... 错误!未定义书签。 6、凸轮轴总成............................................................................................................................................ 错误!未定义书签。 7、配气机构................................................................................................................................................ 错误!未定义书签。 8、传动系统................................................................................................................................................ 错误!未定义书签。 9、进排气系统............................................................................................................................................ 错误!未定义书签。 10、油底壳部件.......................................................................................................................................... 错误!未定义书签。 11、增压润滑系统...................................................................................................................................... 错误!未定义书签。 12、机油泵总成.......................................................................................................................................... 错误!未定义书签。 13、风扇、水泵总成.................................................................................................................................. 错误!未定义书签。 14、冷却水路.............................................................................................................................................. 错误!未定义书签。 15、电器系统.............................................................................................................................................. 错误!未定义书签。 16、燃油管路总成...................................................................................................................................... 错误!未定义书签。 17、空气压缩机部件（带空气压缩机专用）.......................................................................................... 错误!未定义书签。 18、动力转向泵部件.................................................................................................................................. 错误!未定义书签。

系列柴油机零件图册系列柴油机零件图册PARTSCATALOGOF

）系列柴油机零件图册 认证） 常柴4L35B/4LD40B（通过EPA IV认证 PARTS CATALOG OF CHANGCHAI BRAND 4L35B/4LD40B(AUTHORIZED BY EPA IV CERTIFICATE) DIESEL ENGINE 常柴股份有限公司 CHANGCHAI CO.，LTD.CHINA

No. Part No.名 称Name of part Quantity 1 GB/T3452.1-92O 型密封圈 33.5×2.65O Seal ring 33.5×2.6512 N85-01002加油口盖Oil filling cover 13 GB/T65-2000螺钉M4×6Bolt M4×644 ZN390TE-01018(I)EPA 排放标签 EPA emission label 15 N85-01004抽气管Breather tube 16 4L68-010003B 气缸盖罩Cylinder head cover 17 N485-01001气缸盖罩密封圈Cylinder head cover seal 18 N85-01005挡架Retainer 19 N85-01008铁丝滤网Steel wool screen 110 N85-01007多孔挡板Multi-hole retaining plate 111 N85-01006挡油板Oil retainer 112 GB/T895-87垫圈 Washer 6213 GB/T65-2000螺钉M6×12Screw M6×12214 ZN390TE-09007回气管Breather pipe 115QC/T619-1999夹箍Q676B25Pipe clip Q676B252 No. Part No.名 称Name of part Quantity 1 N85-02101A 套管 Sleeve 42 GB/T5782-2000螺栓M8×20Bolt M8×2043 N85-02004吊耳Lifting eye 14 4L68-020006排气管垫片Exhaust manifo 45 N85-02109碗形塞φ26Expansion plugφ2646 N85-02105气门导管Intake manifold 47 GB/T923-88盖形螺母 M8Nut M858 GB/T5783-2000螺栓M10×30Bolt M10×3049 GB/T93-87垫圈10Washer 10610 N85T-20001垫片Gasket 111 GB/T899-88螺柱M8×75Stud M8×75812 GB/T6170-2000螺母M8Nut M8813 N485T-10001A 排气管Exhaust manifold 114 4B26-021008气缸盖Cylinder head 115 4L68-020009喷油器压板Injector plate 416 GB/T899-88螺柱M10×50Bolt M10×50417 GB/T6170-2000螺母 M10Nut M10418 N85-02104碗形塞φ55Expansion plugφ55119 N85-02102碗形塞φ20Expansion plugφ20420 N485T-09001进气管Intake manifold 121 GB/T5783-2000螺栓M8×45Bolt M8×45422 GB/T97.1-2002垫圈8Washer 8423 N485-09006垫片Gasket 324 N485-09005盖板Cover 225 ZN490QA-02005进气管垫片Intake manifold gasket 126 4L68-021007进气门座Intake vlvae seat 427 4L68-021006排气门座Exhaust valve seat 428 GB/T5783-2000螺栓M8×16Bolt M8×16829 QJ/MD05.01组合垫圈8Washer 8530 GB/T899-88螺柱M10×50Bolt M10×50831 GB/T859-87垫圈8Washer 82932 GB/T5782-2000螺栓M8×28Bolt M8×28533 N85Q-17004节温器壳垫片Thermostat shell gasket 1344B26-023000A 电热塞Heater plug 4 Cylinder Head Cover Assembly （Fig.1） 气缸盖总成气缸盖总成（（图2） Cylind Head Assembly (Fig.2) 气缸盖罩总成气缸盖罩总成（（图1）