? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
Doc. No. MD-2 20, Rev. F
CAT5110, CAT5118, CAT5119CAT5123, CAT5124, CAT5125
32-Tap MiniPot? Digitally Programmable Potentiometers with 2-Wire Interface
FeATures
0.3μA ultra-low standby current single-supply operation: 2.7V to 5.5V Glitchless switching between resistor taps Power-on reset to midscale 2-Wire up/down serial interface
Resistance values: 10kΩ, 50kΩ and 100kΩAll devices available in sOT-23 package CAT5110, CAT5118, CAT5119 also available in sC70
■■■■■■■■
DesCrIPTIOn
CAT5 0/5 8/5 9/5 23/5 24/5 25 linear-taper digitally programmable potentiometers perform the same function as a mechanical potentiometer or a variable resistor. These devices consist of a fixed resistor and a wiper contact with 32-tap points that are digitally controlled through a 2-wire up/down serial interface.The CAT5110 and CAT5125 are configured as poten -tiometers. The CAT5118/19/23/24 are configured as variable resistors.
Three resistance values are available: 10kΩ, 50kΩ and 100kΩ. All devices are available in space-saving 5-pin and 6-pin SOT-23 packages. The CAT5 0/5 8/5 9 are also available in the SC70 package.
PIn COnFIGurATIOn
CS
H
L
U/D V sOT-23
sOT-23
sOT-23
CS
H
L
U/D V sC70
sC70
sC70
APPlICATIOns
lCD screen adjustment Volume control
Mechanical potentiometer replacement Gain adjustment
line impedance matching
■■■■■
For Ordering Information details, see page 11.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT51252
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
AbsOluTe MAxIMuM rATInGs (1)V DD to GND
-0.3V to +6V All Other Pins to GND
-0.3V to (V DD + 0.3)V Input and Output Latch-Up Immunity
±200mA Max imum Continuous Current into H, L and W 100kΩ 50kΩ 10kΩ
±0.6mA ± .3mA ± .3mA
Continuous Power Dissipation (T A = +70oC) 5-pin SC70* 6-pin SC70*
247mW 245mW Operating Temperature Range -40°C to +85oC Junction Temperature + 50oC Storage Temperature Range
-65oC to + 50oC Soldering Temperature (soldering, 0s)
+300oC notes:
(1) Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this specification is not implied. Exposure to any absolute maximum rating for extended periods may affect device performance and reliability.(*) Derate 3. mW/oC above T A = +70oC
PIn DesCrIPTIOns
Pin number
Pin name Description CAT5110/CAT5125
CAT5118/CAT5123
CAT5119/CAT5124
V DD Power Supply 222GND Ground
333U/D Up/Down Control Input. With CS low, a low-to-high transition increments or decrements the wiper position.
444CS Chip Select Input. A high-to-low CS transition determines the mode: increment if U/D is high, or decrement if U/D is low.--5L Low Terminal of Resistor 5--W Wiper Terminal of Resistor 6
6
6
H
High Terminal of Resistor
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
3
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
eleCTrICAl CHArACTerIsTICs
V DD = 2.7V to 5.5V, V H = V DD , V L = 0, T A = -40oC to 85oC. Typical values are at V DD = 2.7V, T A = 25oC, unless otherwise noted.Parameter symbol
Conditions
Min
Typ
Max
units
DC Performance Resolution
32Taps
End-to-End Resistance (-00)80 00 20kΩEnd-to-End Resistance (-50)405060End-to-End Resistance (- 0)8
0 2
End-to-End Resistance Tempco TC R
200ppm/oC Ratiometric Resistance Tempco 5ppm/oC Integral Nonlinearity INL ±0.5
± LSB Differential Nonlinearity DNL
± LSB Full-Scale Error ±0.
LSB Zero-Scale Error LSB Wiper Resistance R W
CAT5 0/ 8/ 9200600ΩCAT5 23/24/25
80
200
Digital Inputs Input High Voltage V IH 0.7 x V DD
V Input Low Voltage V IL 0.3 x V DD
V Timing Characteristics (Figures 1, 2)
U/D Mode to CS Setup t CU 25ns CS to U/D Step Setup t CI 50ns CS to U/D Step Hold t IC 25ns U/D Step Low Period t IL 25ns U/D Step High Period t IH 25
ns Up/Down Toggle Rate ( )
f TOGGLE
MHz
Output Settling Time (2)
t SETTLE
100kΩ variable
resistor configuration, C L = 0pF
μs
100kΩ potentiometer
configuration, C L = 0pF
0.25
Power supply Supply Voltage
V DD 2.7
5.5V Active Supply Current (3)I DD 25μA Standby Supply Current (4)
I SB
V DD = +5V
0.3
μA
notes:
( ) Up/Down Toggle Rate:
SETTLE
TOGGLE t =
f
(2) Typical settling times are dependent on end-to-end resistance.(3) Supply current measured while changing wiper tap, f TOGGLE = MHz.(4) Supply current measured while wiper position is fixed.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
4
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
TyPICAl OPerATInG CHArACTerIsTICs T A
= 25oC, unless otherwise noted.
5
10
15202530
020406080R W (?)
100120140160WIPER POSITION
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
5
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
FunCTIOnAl DesCrIPTIOn
The CAT5 0/5 8/5 9/5 23/5 24/5 25 consist of a fixed resistor and a wiper contact with 32-tap points that are digitally controlled through a 2-wire up/down serial interface. Three end-to-end resistance values are available: 0k Ω, 50k Ω and 00k Ω.
The CAT5 0/5 25 is designed to operate as a potentiometer. In this configuration, the low terminal of the resistor array is connected to ground (pin 2).The CAT5 8/5 23 performs as a variable resistor. In this device, the wiper terminal and high terminal of the resistor array are connected at pin 5. The CAT5 9/5 24 is a similar variable resistor, except the low terminal is connected to pin 5.
DIGITAl InTerFACe OPerATIOn
The MiniPots have two modes of operation when the serial interface is active: increment and decrement mode. The serial interface is only active when CS is low.
Figure 2. serial Interface Timing Diagram, Decrement Mode
Figure 1. serial Interface Timing Diagram, Increment Mode
The CS and U/D inputs control the position of the wiper along the resistor array. When CS transitions from high to low, the part will go into increment mode if U/D input is high, and into decrement mode when U/D input is low. Once the mode is set, the device will remain in that mode until CS goes high again. A low-to-high transition at the U/D pin will increment or decrement the wiper position depending on the current mode (Figures and 2).When the CS input transitions to high (serial interface inactive), the value of the counter is stored and the wiper position is maintained.
Note that when the wiper reaches the maximum (or minimum) tap position, the wiper will not wrap around to the minimum (or maximum) position. POWer-On reseT
All parts in this family feature power-on reset (POR) circuitry that sets the wiper position to midscale at power-up. By default, the chip is in the increment mode.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT51256
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
APPlICATIOns InFOrMATIOn
The MiniPots are intended for circuits requiring digitally controlled adjustable resistance, such as LCD contrast control, where voltage biasing adjusts the display contrast.
AlTernATIVe POsITIVe lCD bIAs COnTrOl An op amp can be used to provide buffering and gain on the output of the CAT5 0/CAT5 25. This can be done by connecting the wiper output to the positive input of a noninverting op amp as shown in Figure 3. Figure 4 shows a similar circuit for the CAT5 9/CAT5 24.
Figure 3. Positive lCD bias Control
Figure 4. Positive lCD bias Control
ADjusTAble GAIn
Figure 5 shows how to use either a variable resistor or a potentiometer to digitally adjust the gain of a noninverting op amp configuration, by connecting the Minipot in series with a resistor to ground. The MiniPots have a low 5ppm/oC ratiometric tempco that allows for a very stable adjustable gain configuration over temperature.
Figure 5a. Adjustable Gain Circuit
Figure 5b. Adjustable Gain Circuit
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
7
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
TOP VIEW
SIDE VIEW
END VIEW
θSC-70 6-Lead (SB, SD)Doc. No. SC706-023-01
07/31/07
(1) All dimensions are in millimeters. Angles in degrees.(2) Complies with JEDEC MO-203. SYMBOL MIN NOM MAX
A 0.80 1.10 A1 0.00 0.10 A2 0.80 1.00 b 0.15 0.30
c 0.10 0.18 D 1.80 2.00 2.20 E 1.15 1.25 1.35 E1 1.80 2.10 2.40 e 0.65 BSC L 0.26 0.36 0.46
L1 0.42 REF L2 0.15 BSC
θ 0° 8°
θ1
4°
10°
PACkAGe OuTlIne DrAWInGs
For current Tape and Reel information, download the PDF file from: https://www.wendangku.net/doc/ec4039817.html,/documents/tapeandreel.pdf
sC-70 6-lead (sD)
notes:
( ) All dimensions are milimeters. Angles in degrees.(2) Complies with JEDEC MO-203.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT51258
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
TOP VIEW
SIDE VIEW
END VIEW
(1) All dimensions in millimeters. Angles in degrees.(2) Complies with JEDEC standard MO-178.Doc. No. SOT236-029-01
08/02/07
SOT-23 6-Lead (TP , TB)
SYMBOL MIN NOM MAX
A 0.90 1.45 A1 0.00 0.15 A2 0.90 1.15 1.30 b 0.30 0.50
c 0.08 0.22
D 2.90 BSC
E 2.80 BSC E1 1.60 BSC e 0.95 BSC
L 0.30 0.45 0.60
L1 0.60 REF L2 0.25 REF
θ 0o 4o 8o θ1 5o 10o 15o
θ2
5o
10o
15o
notes:
( ) All dimensions are in millimeters. Angles in degrees.(2) All specifications comply to JEDEC standard MO-178.
sOT-23 6-lead (Tb)
For current Tape and Reel information, download the PDF file from: https://www.wendangku.net/doc/ec4039817.html,/documents/tapeandreel.pdf
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
9
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
TOP VIEW
SIDE VIEW
END VIEW
θPACKAGE OUTLINE DRAWING
Doc. No. SC705-022-01
07/10/07
(1) All dimensions are in millimeters. Angles in degrees.(2) Complies with JEDEC MO-203.
SYMBOL
MIN
NOM
MAX
A 0.80 1.10 A1 0.00 0.10 A2 0.80 1.00 b 0.15 0.30
c 0.10 0.18 D 1.80 2.00 2.20 E 1.15 1.25 1.35 E1 1.80 2.10 2.40 e 0.65 BSC L 0.26 0.36 0.46
L1 0.42 REF L2 0.15 BSC
θ 0° 8°
θ1
4°
10°
For current Tape and Reel information, download the PDF file from: https://www.wendangku.net/doc/ec4039817.html,/documents/tapeandreel.pdf
sC-70 5-leAD (sD)
notes:
( ) All dimensions are milimeters. Angles in degrees.(2) Complies with JEDEC MO-203.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 0
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
TOP VIEW
SIDE VIEW
END VIEW
(1) All dimensions in millimeters. Angles in degrees.(2) Complies with JEDEC standard MO-178.Doc. No. SOT235-030-01
08/02/07
SOT-23 5-Lead (TP , TB)
θ2
SYMBOL MIN NOM MAX
A 0.90 1.45 A1 0.00 0.15 A2 0.90 1.15 1.30
b 0.30 0.50
c 0.08 0.22
D 2.90 BSC
E 2.80 BSC E1 1.60 BSC
e 0.95 BSC L 0.30 0.45 0.60
L1 0.60 REF L2 0.25 REF
θ 0o 4o 8o θ1 5o 10o 15o
θ2
5o
10o
15o
notes:
( ) All dimensions are in millimeters. Angles in degrees.(2) All specifications comply to JEDEC standard MO-178.
sOT-23 5-lead (Tb)
For current Tape and Reel information, download the PDF file from: https://www.wendangku.net/doc/ec4039817.html,/documents/tapeandreel.pdf
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
exAMPle OF OrDerInG InFOrMATIOn
Prefix Device #
Suffix
notes:
( ) All packages are RoHS-compliant (Lead-free, Halogen-free).
(2) The device used in the example above is a CAT5110SDI-10 -GT3 (NiPdAu, Tape and Reel).(3) The standard finish is NiPdAu.
(4) For additional package and temperature options, please contact your nearest Catalyst Semiconductor Sales office.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 2
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
OrDerInG InFOrMATIOn
Device Ordering part number Resistor [kΩ]
Top Marking
Pin package Parts per reel
CAT5110
CAT5 0SDI- 0-GT3 0JU_SC70-63,000CAT5 0SDI- 0-GT 0 0JU_SC70-6 0,000CAT5 0TBI- 0-T3 0JUYM SOT23-63,000CAT5 0TBI- 0-T 0 0JUYM SOT23-6 0,000CAT5 0TBI- 0-GT3 0JUYM SOT23-63,000CAT5 0TBI- 0-GT 0 0JUYM SOT23-6 0,000CAT5 0SDI-50-GT350JV_SC70-63,000CAT5 0SDI-50-GT 050JV_SC70-6 0,000CAT5 0TBI-50-T350JVYM SOT23-63,000CAT5 0TBI-50-T 050JVYM SOT23-6 0,000CAT5 0TBI-50-GT350JVYM SOT23-63,000CAT5 0TBI-50-GT 050JVYM SOT23-6 0,000CAT5 0SDI-00-GT3 00JW_SC70-63,000CAT5 0SDI-00-GT 0 00JW_SC70-6 0,000CAT5 0TBI-00-T3 00JWYM SOT23-63,000CAT5 0TBI-00-T 0 00JWYM SOT23-6 0,000CAT5 0TBI-00-GT3 00JWYM SOT23-63,000CAT5 0TBI-00-GT 0
00JWYM SOT23-6 0,000CAT5118
CAT5 8SDI- 0-GT3 0JL_SC70-53,000CAT5 8SDI- 0-GT 0 0JL_SC70-5 0,000CAT5 8TBI- 0-T3 0JLYM SOT23-53,000CAT5 8TBI- 0-T 0 0JLYM SOT23-5 0,000CAT5 8TBI- 0-GT3 0JLYM SOT23-53,000CAT5 8TBI- 0-GT 0 0JLYM SOT23-5 0,000CAT5 8SDI-50-GT350JM_SC70-53,000CAT5 8SDI-50-GT 050JM_SC70-5 0,000CAT5 8TBI-50-T350JMYM SOT23-53,000CAT5 8TBI-50-T 050JMYM SOT23-5 0,000CAT5 8TBI-50-GT350JMYM SOT23-53,000CAT5 8TBI-50-GT 050JMYM SOT23-5 0,000CAT5 8SDI-00-GT3 00JN_SC70-53,000CAT5 8SDI-00-GT 0 00JN_SC70-5 0,000CAT5 8TBI-00-T3 00JNYM SOT23-53,000CAT5 8TBI-00-T 0 00JNYM SOT23-5 0,000CAT5 8TBI-00-GT3 00JNYM SOT23-53,000CAT5 8TBI-00-GT 0
00
JNYM
SOT23-5
0,000
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
3
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
OrDerInG InFOrMATIOn (Continued)
Device Ordering part number Resistor [kΩ]
Top Marking
Pin package Parts per reel
CAT5119
CAT5 9SDI- 0-GT3 0JP_SC70-63,000CAT5 9SDI- 0-GT 0 0JP_SC70-6 0,000CAT5 9TBI- 0-T3 0JPYM SOT23-63,000CAT5 9TBI- 0-T 0 0JPYM SOT23-6 0,000CAT5 9TBI- 0-GT3 0JPYM SOT23-63,000CAT5 9TBI- 0-GT 0 0JPYM SOT23-6 0,000CAT5 9SDI-50-GT350JR_SC70-63,000CAT5 9SDI-50-GT 050JR_SC70-6 0,000CAT5 9TBI-50-T350JRYM SOT23-63,000CAT5 9TBI-50-T 050JRYM SOT23-6 0,000CAT5 9TBI-50-GT350JRYM SOT23-63,000CAT5 9TBI-50-GT 050JRYM SOT23-6 0,000CAT5 9SDI-00-GT3 00JT_SC70-63,000CAT5 9SDI-00-GT 0 00JT_SC70-6 0,000CAT5 9TBI-00-T3 00JTYM SOT23-63,000CAT5 9TBI-00-T 0 00JTYM SOT23-6 0,000CAT5 9TBI-00-GT3 00JTYM SOT23-63,000CAT5 9TBI-00-GT 0
00JTYM SOT23-6 0,000CAT5123
CAT5 23TBI- 0-T3 0TZYM SOT23-53,000CAT5 23TBI- 0-T 0 0TZYM SOT23-5 0,000CAT5 23TBI- 0-GT3 0TEYM SOT23-53,000CAT5 23TBI- 0-GT 0 0TEYM SOT23-5 0,000CAT5 23TBI-50-T3 ( )50UAYM SOT23-53,000CAT5 23TBI-50-T 0 ( )50UAYM SOT23-5 0,000CAT5 23TBI-50-GT3 ( )50TXYM SOT23-53,000CAT5 23TBI-50-GT 0 ( )50TXYM SOT23-5 0,000CAT5 23TBI-00-T3 ( ) 00TWYM SOT23-53,000CAT5 23TBI-00-T 0 ( ) 00TWYM SOT23-5 0,000CAT5 23TBI-00-GT3 ( ) 00TYYM SOT23-53,000CAT5 23TBI-00-GT 0 ( )
00
TYYM
SOT23-5
0,000
notes:
( ) Contact factory for availability.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 4
Doc. No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
Device Ordering part number Resistor [kΩ]
Top Marking Pin package Parts per reel
CAT5124
CAT5 24TBI- 0-T3 ( ) 0SRYM SOT23-53,000CAT5 24TBI- 0-T 0 ( ) 0SRYM SOT23-5 0,000CAT5 24TBI- 0-GT3 ( ) 0SSYM SOT23-53,000CAT5 24TBI- 0-GT 0 ( )
0SSYM SOT23-5 0,000CAT5 24TBI-50-T350SKYM SOT23-53,000CAT5 24TBI-50-T 050SKYM SOT23-5 0,000CAT5 24TBI-50-GT350NPYM SOT23-53,000CAT5 24TBI-50-GT 050NPYM SOT23-5 0,000CAT5 24TBI-00-T3 ( ) 00SLYM SOT23-53,000CAT5 24TBI-00-T 0 ( ) 00SLYM SOT23-5 0,000CAT5 24TBI-00-GT3 ( ) 00NRYM SOT23-53,000CAT5 24TBI-00-GT 0 ( )
00NRYM SOT23-5 0,000CAT5125
CAT5 25TBI- 0-T3 0SMYM SOT23-63,000CAT5 25TBI- 0-T 0 0SMYM SOT23-6 0,000CAT5 25TBI- 0-GT3 0STYM SOT23-63,000CAT5 25TBI- 0-GT 0 0STYM SOT23-6 0,000CAT5 25TBI-50-T3 ( )50SNYM SOT23-63,000CAT5 25TBI-50-T 0 ( )50SNYM SOT23-6 0,000CAT5 25TBI-50-GT3 ( )50NSYM SOT23-63,000CAT5 25TBI-50-GT 0 ( )50NSYM SOT23-6 0,000CAT5 25TBI-00-T3 ( ) 00SPYM SOT23-63,000CAT5 25TBI-00-T 0 ( ) 00SPYM SOT23-6 0,000CAT5 25TBI-00-GT3 ( ) 00NTYM SOT23-63,000CAT5 25TBI-00-GT 0 ( )
00
NTYM
SOT23-6
0,000
OrDerInG InFOrMATIOn (Continued)
notes:
( ) Contact factory for availability.
CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125
5
Doc No. MD-2 20, Rev. F
? Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
reVIsIOn HIsTOry
Date rev.reason 03/ 0/2004A Initial Issue
03/ 8/2004B Update Typical Operating Characteristics Update SC70 package outline
07/ 9/2004
C
Added SOT-23 package in all areas Update Description
Update Electrical Characteristics
Update Typical Operating Characteristics Update Functional Description
2/ 5/2006D
Added CAT5 23, CAT5 24, CAT5 25Update Features Update Description
Update Pin Configuration Update Pin Description
Update Electrical Characteristics
Update Typical Operating Characteristics Update Functional Description Update Figures 3, 4, 5 and 6Update Package Information
Update Example of Ordering Information Update Ordering information 0 /29/07E Update Electrical Characteristics
08/03/07
F
Update Package Outline Drawings
Update Example of Ordering Information Update Ordering Information “Top Marking“
Catalyst Semiconductor, Inc.Corporate Headquarters 2975 Stender Way Santa Clara, CA 95054Phone: 408.542. 000Fax: https://www.wendangku.net/doc/ec4039817.html,
Copyrights, Trademarks and Patents ? Catalyst Semiconductor, Inc.
Trademarks and registered trademarks of Catalyst Semiconductor include each of the following:Beyond Memory?, DPP?, EZDim?, LDD?, MiniPot? and Quad-Mode?
Catalyst Semiconductor has been issued U.S. and foreign patents and has patent applications pending that protect its products.
CATALYST SEMICONDUCTOR MAKES NO WARRANTY, REPRESENTATION OR GUARANTEE, EXPRESS OR IMPLIED, REGARDING THE SUITABILITY OF ITS PRODUCTS FOR ANY PARTICULAR PURPOSE, NOR THAT THE USE OF ITS PRODUCTS WILL NOT INFRINGE ITS INTELLECTUAL PROPERTY RIGHTS OR THE RIGHTS OF THIRD PARTIES WITH RESPECT TO ANY PARTICULAR USE OR APPLICATION AND SPECIFICALLY DISCLAIMS ANY AND ALL LIABILITY ARISING OUT OF ANY SUCH USE OR APPLICATION, INCLUDING BUT NOT LIMITED TO, CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Catalyst Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Catalyst Semiconductor product could create a situation where personal injury or death may occur.
Catalyst Semiconductor reserves the right to make changes to or discontinue any product or service described herein without notice. Products with data sheets labeled “Advance Information” or “Preliminary” and other products described herein may not be in production or offered for sale.
Catalyst Semiconductor advises customers to obtain the current version of the relevant product information before placing orders. Circuit diagrams illustrate typical
semiconductor applications and may not be complete.
Document No: MD-2 20Revision: F Issue date: 08/03/07