论文：翻译项目报告模板

1翻译项目报告（口、笔译岗位实习报告）参考模板Abstract(in Foreign language)

摘要

Key words（关键词）

Introduction

4.2 翻译实践报告（笔译自选实践、口译模拟实践）参考模板

Abstract(in Foreign language) 摘要

Key words（关键词）Introduction

4.3 翻译实验报告参考模板Abstract(in Foreign language) 摘要

Key words（关键词）Introduction

4.4 翻译调研报告（口、笔译）参考模板Abstract(in Foreign language)

摘要

Key words（关键词）

Introduction

附3：论文质量评审参考

翻译硕士专业学位论文质量评审，针对不同类型的论文，评审容及权重可略有不同。参考如下：

翻译实践报告（包括岗位实习报告、模拟实践报告）

注：评价结论分为优秀、良好、合格、不合格四种。优秀：总分≥85；良好：84≥总分≥70；合格：69≥总分≥60；不合格：总分≤59。

翻译实验报告

注：评价结论分为优秀、良好、合格、不合格四种。优秀：总分≥85；良好：84≥总分≥70；合格：69≥总分≥60；不合格：总分≤59。

调研报告

注：评价结论分为优秀、良好、合格、不合格四种。优秀：总分≥85；良好：84≥总分≥70；合格：69≥总分≥60；不合格：总分≤59。

学士学位证书及毕业证英文翻译模板

学士学位证书及毕业证英文翻译模板 附录：今天老师给我们留了个作业，让我们把本科毕业证书翻译成英文的，怎么翻译啊~所以请大家帮帮忙吧~谁能给我提供一个毕业证书的英文模版啊~本科毕业证书的啊~越快越好，如果老师满意，多少钱我都不在乎~包括专升本证书，能有工商管理硕士的最好！学士学位证书英语翻译与毕业证英文翻译模板，为爱大学本科生及研究生提供英文毕业证翻译样本。首先请看《办理中英文成绩单、英文毕业证学位证书的须知》。涉及中文或英文成绩单翻译，含英文毕业证书学位证书的证明。学生学位证书英文翻译模板BACHELOR’S DEGREE CERTIFICATE This is to certify that Ms. Wang Danli, born in October 1977, has studied in the Department of Law, xxx University with a specialty of Law from September 1996 to June 2000. Upon completing and passing all the required courses of the 4-year undergraduate program, she is granted graduation. In accordance with the academic degree act of the People’s Republic of China, the aforesaid student is awarded the Bachelor’s Degree in Law. xxx Chairman of Degree Appraising Committee of xx University June 30, 2000 Certificate No.: 103354003888 本科毕业证书翻译模板DIPLOMA This is to certify that Ms. Wang Lan, born on February 29, 1980, has studied in the Department of Foreign Languages,xxxUniversity with a specialty of English from September 1997 to June 2000. Upon completing and passing all the required

英文翻译模板-(户口本全本)

Household Register Under Supervision of the Ministry of Public Security of P. R. C. ANNOUNCEMENTS 1.Household register has the legal validity that certifies the attorney ship of a citizen and the

relationship of family members, and it is the main reference for the censor and checkup of domiciliary register which is undertaking by the household registration authority. When the functionary of household registration authority censor and verify the household register, the householder and members of this family shall take the initiative in presenting the household register. 2.The householder shall take the household register in safekeeping; the household register is prohibited to be altered, transferred and leased. When the household register is lost, the household registration authority should be informed. 3.The right for registering the household register shall be performed by the household registration authority; any other unit and individual shall not make any records on the booklet. 4.The member of this family shall go to the household registration authority for transacting the declaration and registration, applying bring with the booklet, in case of the increase and decrease of the members and the alteration of registration items. 5.In case of that the whole family moves out of the residency, the household register shall be turned in and cancelled. Record of Dwelling Address Alteration

毕业论文外文翻译模板

农村社会养老保险的现状、问题与对策研究社会保障对国家安定和经济发展具有重要作用，“城乡二元经济”现象日益凸现，农村社会保障问题客观上成为社会保障体系中极为重要的部分。建立和完善农村社会保障制度关系到农村乃至整个社会的经济发展，并且对我国和谐社会的构建至关重要。我国农村社会保障制度尚不完善，因此有必要加强对农村独立社会保障制度的构建，尤其对农村养老制度的改革，建立健全我国社会保障体系。从户籍制度上看，我国居民养老问题可分为城市居民养老和农村居民养老两部分。对于城市居民我国政府已有比较充足的政策与资金投人，使他们在物质和精神方面都能得到较好地照顾，基本实现了社会化养老。而农村居民的养老问题却日益突出，成为摆在我国政府面前的一个紧迫而又棘手的问题。 一、我国农村社会养老保险的现状 关于农村养老，许多地区还没有建立农村社会养老体系，已建立的地区也存在很多缺陷，运行中出现了很多问题，所以完善农村社会养老保险体系的必要性与紧迫性日益体现出来。 （一）人口老龄化加快 随着城市化步伐的加快和农村劳动力的输出，越来越多的农村青壮年人口进入城市，年龄结构出现“两头大，中间小”的局面。中国农村进入老龄社会的步伐日渐加快。第五次人口普查显示：中国65岁以上的人中农村为5938万，占老龄总人口的67.4%.在这种严峻的现实面前，农村社会养老保险的徘徊显得极其不协调。 （二）农村社会养老保险覆盖面太小 中国拥有世界上数量最多的老年人口，且大多在农村。据统计，未纳入社会保障的农村人口还很多，截止2000年底，全国7400多万农村居民参加了保险，占全部农村居民的11.18%，占成年农村居民的11.59%.另外，据国家统计局统计，我国进城务工者已从改革开放之初的不到200万人增加到2003年的1.14亿人。而基本方案中没有体现出对留在农村的农民和进城务工的农民给予区别对待。进城务工的农民既没被纳入到农村养老保险体系中，也没被纳入到城市养老保险体系中，处于法律保护的空白地带。所以很有必要考虑这个特殊群体的养老保险问题。

毕业论文英文参考文献与译文

Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of

毕业设计外文翻译格式实例.

理工学院毕业设计(论文)外文资料翻译 专业：热能与动力工程 姓名：赵海潮 学号：09L0504133 外文出处：Applied Acoustics, 2010(71):701~707 附件： 1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 基于一维CFD模型下汽车排气消声器的实验研究与预测Takeshi Yasuda, Chaoqun Wua, Noritoshi Nakagawa, Kazuteru Nagamura 摘要目前，利用实验和数值分析法对商用汽车消声器在宽开口喉部加速状态下的排气噪声进行了研究。在加热工况下发动机转速从1000转/分钟加速到6000转/分钟需要30秒。假定其排气消声器的瞬时声学特性符合一维计算流体力学模型。为了验证模拟仿真的结果，我们在符合日本工业标准（JIS D 1616）的消声室内测量了排气消声器的瞬态声学特性，结果发现在二阶发动机转速频率下仿真结果和实验结果非常吻合。但在发动机高阶转速下（从5000到6000转每分钟的四阶转速，从4200到6000转每分钟的六阶转速这样的高转速范围内），计算结果和实验结果出现了较大差异。根据结果分析，差异的产生是由于在模拟仿真中忽略了流动噪声的影响。为了满足市场需求，研究者在一维计算流体力学模型的基础上提出了一个具有可靠准确度的简化模型，相对标准化模型而言该模型能节省超过90％的执行时间。 关键字消声器排气噪声优化设计瞬态声学性能 1 引言 汽车排气消声器广泛用于减小汽车发动机及汽车其他主要部位产生的噪声。一般而言，消声器的设计应该满足以下两个条件：（1）能够衰减高频噪声，这是消声器的最基本要求。排气消声器应该有特定的消声频率范围，尤其是低频率范围，因为我们都知道大部分的噪声被限制在发动机的转动频率和它的前几阶范围内。（2）最小背压，背压代表施加在发动机排气消声器上额外的静压力。最小背压应该保持在最低限度内，因为大的背压会降低容积效率和提高耗油量。对消声器而言，这两个重要的设计要求往往是互相冲突的。对于给定的消声器，利用实验的方法，根据距离尾管500毫米且与尾管轴向成45°处声压等级相近的排气噪声来评估其噪声衰减性能，利用压力传感器可以很容易地检测背压。 近几十年来，在预测排气噪声方面广泛应用的方法有：传递矩阵法、有限元法、边界元法和计算流体力学法。其中最常用的方法是传递矩阵法（也叫四端网络法）。该方

毕业论文外文翻译模版

吉林化工学院理学院 毕业论文外文翻译English Title（Times New Roman ，三号） 学生学号：08810219 学生姓名：袁庚文 专业班级：信息与计算科学0802 指导教师：赵瑛 职称副教授 起止日期：2012.2.27～2012.3.14 吉林化工学院 Jilin Institute of Chemical Technology

1 外文翻译的基本内容 应选择与本课题密切相关的外文文献（学术期刊网上的），译成中文，与原文装订在一起并独立成册。在毕业答辩前，同论文一起上交。译文字数不应少于3000个汉字。 2 书写规范 2.1 外文翻译的正文格式 正文版心设置为：上边距：3.5厘米，下边距：2.5厘米，左边距：3.5厘米，右边距：2厘米，页眉：2.5厘米，页脚：2厘米。 中文部分正文选用模板中的样式所定义的“正文”，每段落首行缩进2字；或者手动设置成每段落首行缩进2字，字体：宋体，字号：小四，行距：多倍行距1.3，间距：前段、后段均为0行。 这部分工作模板中已经自动设置为缺省值。 2.2标题格式 特别注意：各级标题的具体形式可参照外文原文确定。 1．第一级标题（如：第1章绪论）选用模板中的样式所定义的“标题1”，居左；或者手动设置成字体：黑体，居左，字号：三号，1.5倍行距，段后11磅，段前为11磅。 2．第二级标题（如：1.2 摘要与关键词）选用模板中的样式所定义的“标题2”，居左；或者手动设置成字体：黑体，居左，字号：四号，1.5倍行距，段后为0，段前0.5行。 3．第三级标题（如：1.2.1 摘要）选用模板中的样式所定义的“标题3”，居左；或者手动设置成字体：黑体，居左，字号：小四，1.5倍行距，段后为0，段前0.5行。 标题和后面文字之间空一格（半角）。 3 图表及公式等的格式说明 图表、公式、参考文献等的格式详见《吉林化工学院本科学生毕业设计说明书（论文）撰写规范及标准模版》中相关的说明。

学士学位证书及毕业证英文翻译模板

学士学位证书及毕业证英文翻译模板 BACHELOR’S DE GREE CERTIFICATE This is to certify that Ms. Wang Danli, born in October 1977, has studied in the Department of Law, xxx University with a specialty of Law from September 1996 to June 2000. Upon completing and passing all the required courses of the 4-year undergraduate program, she is granted graduation. In accordance with the academic degree act of the People’s Republic of China, the aforesaid student is awarded the Bachelor’s Degree in Law. xxx Chairman of Degree Appraising Committee of xx University June 30, 2000 Certificate No.: 103354003888 [ Last edited by rachel4176 on 2005-6-22 at 21:14 ] 毕业证书翻译模板 DIPLOMA This is to certify that Ms. Wang Lan, born on February 29, 1980, has studied in the Department of Foreign Languages,xxxUniversity with a specialty of English from September 1997 to June 2000. Upon completing and passing all the required courses of the 4-year undergraduate program, she is granted graduation. xx President of xx University Registration No.: 298168015 Date Issued: June 30, 2000

毕业论文(英文翻译)排版格式

英文翻译说明 1. 英文翻译文章输成word，5号新罗马（New Times Roman）字体，1.5倍行间距，将来方便打印和一起装订；英文中的图表要重新画，禁止截图。 2. 整篇论文1.5倍行间距，打印时，用B5纸，版面上空2.5cm，下空2cm，左空2.5cm，右空2cm（左装订）。 3. 论文翻译后的摘要用五号宋体，正文小四号宋体、英文和数字用新罗马（New Times Roman）12、参考文献的内容用五号字体。图和表头用五号字体加粗并居中，图和表中的内容用五号字体。论文翻译的作者用五号字体加粗。 论文大标题………小三号黑体、加黑、居中 第二层次的题序和标题………小四号黑体、加黑、居中 第三层次的题序和标题………小四号宋体、加黑、居中 正文……………………………小四号宋体、英文用新罗马12 页码……………………………小五号居中，页码两边不加修饰符 4. 论文中参考文献严格按照下述排版。 专著格式：序号.编著者.书名[M].出版地: 出版社, 年代, 起止页码 期刊论文格式：序号.作者.论文名称[J]. 期刊名称, 年度, 卷(期): 起止页码 学位论文格式：序号.作者.学位论文名称[D]. 发表地: 学位授予单位, 年度 例子: (1).胡千庭, 邹银辉, 文光才等. 瓦斯含量法预测突出危险新技术[J]. 煤炭学报, 2007.32(3): 276-280. (2). 胡千庭. 煤与瓦斯突出的力学作用机理及应用研究[D]. 北京: 中国矿业大学(北京), 2007. (3). 程伟. 煤与瓦斯突出危险性预测及防治技术[M]. 徐州: 中国矿业大学出版社, 2003.

英文论文翻译

汲水门大桥有限元模型的分析 By Q. W. Zhang, T. Y. P. Chang,and C. C. Chang 摘要：本文提出的有限元模型修正的汲水门大桥的实施，是位于香港的430米主跨双层斜拉桥。通过三维有限元预测和现场振动测试，对该桥的动力特性进行了研究，。在本文中，建立的有限元模型的更新，是基于实测的动态特性。一个全面的灵敏度研究证明各种结构参数（包括连接和边界条件）的影响是在其所关注的模式进行，根据一组的结构参数，然后选择调整。有限元模型的更新在一个迭代的方式以减少之间的预测和测量频率的差异。最后更新的有限元模型，使汲水门大桥能在良好的协议与所测量的固有频率状态，并可以进行更精确的动态响应预测。 简介： 汲水门大桥（图1），位于大屿山及香港湾岛之间，是世界上最长的斜拉桥，是公路交通和铁路交通两用桥梁。为确保其结构的完整性和操作安全性，桥梁已经配备了一个相当复杂的监测系统，包括仪器参数如加速度传感器，位移传感器，液位传感器，温度传感器，应变计，风速仪（Lau and Wong 1997）。由Chang 等人通过有限元预测和现场振动测量对该桥的动力特性进行了研究（2001）。三维有限元（FE）模型，它是基于非线性弹性梁元件构建的塔和甲板上的桁架单元，电缆，和弹性或刚性连接的连接和边界约束[图1（d）]。桥面，包括钢/混凝土框架结构在大跨度和梯形箱梁的中心部分的剩余部分，是使用一个单一的脊柱通过剪切中心桥面的。由于截面的非整体性，通过一个虚拟的等效单片材料来表示复合甲板。这是通过等效的整体桥面的质量和刚度性能检核的复合甲板了。由Chang证明（1998），对截面模量的计算细节可以通过改变报告发现。电缆，另一方面，使用的是线性弹性桁架单元模拟。非线性效应由于电缆张力和下垂的电缆进行线性化，采用弹性刚度等效模量的概念考虑。有限元模型包括464个梁单元，176个桁架单元，和615个节点，总共有1536个自由度。 一般的有限元建模，给出了该桥的物理和模态特性进行详细的描述，而现场振动测试则是作为（理想化的）有限元模型评估基础信息的重要来源。有限元计算结果与现场振动试验表明在自然频率合理的相关性和桥的振型。然而，在预测

论文中英文翻译

An Analysis of Cooperative Principles and Humorous Effects in Friend s 合作原则的分析和在朋友的幽默效应 Humor is a very intriguing and fascinating phenomenon of human society, which is multidimensional, complex and all pervasive. Therefore, many scholars and experts at all times and in all over the world have done profound research on humor. 幽默是人类社会的一个非常有趣和引人入胜的现象，这是多方面的，复杂和无孔不入的。所以，在任何时候，在世界各地的许多学者和专家总是对幽默进行深入的研究。 The significant functions of humor have aroused the interest of many scholars. About 2,000 years ago, people began the research on humor. However, the study of humor is not a simple task for the reason that it is an interdisciplinary science drawing upon a wide range of academic disciplines including biology, psychology, sociology, philosophy, geography, history, linguistics, literature, education, family science, and film studies and so on. Moreover, there are different reasons and purposes for humor. One may wish to be sociable, cope better, seem clever, solve problems, make a critical point, enhance therapy, or express something one could not otherwise express by means of humor. 显著幽默的功能已引起许多学者的兴趣。大约在2000年前，人们对幽默开始研究，然而，这项幽默的研究不是一个简单的任务，理由是它是一个跨学科的科学绘图在各种各样的学科，包括生物学、心理学、社会学、哲学、地理、历史、语言、文学、教育、家庭科学和电影研究等。此外，幽默有不同的原因和目的，人们可能希望有点大男子主义，随机应变，似乎是聪明，解决问题，使一个临界点，加强治疗，或表达的东西不能以其他方式表达幽默的方式。 Within the 20th century, linguistics has developed greatly in almost every area of the discipline from sounds, words and sentences to meaning and texts. Meanwhile, linguistic studies on humor have also extended considerably to social, cultural, and pragmatic concerns. One of the most noticeable achievements in linguistics over the

英文翻译 模板

目录 Housing Consumption and Economic Growth in China (2) 住房消费和经济增长在中国 (10) 摘要 (10) 关键词: (10) 一、介绍 (11) 二、方法 (11) c .固定式测试 (12) d .协整检验 (12) E大肠误差修正模型(ECM)[6] (13) f.格兰杰因果关系检验 (13) 三、应用程序和结果 (14) a .数据和变量 (14) b .固定式测试 (14) e系列是平稳序列 (14) d .误差修正模型 (14) 四、结论 (15) 引用 (15)

Housing Consumption and Economic Growth in China Wang XJ (Wang Xijun) School of Economics & Management, Weifang University of China, xjwang69@https://www.wendangku.net/doc/ef7565361.html, Abstract: Consumption is a very important part in social reproduction, and its driving effect on social economic growth always plays the leading role. Housing is the basic living material which is essential for people?s life; housing consumption is the important material condition for the labor force reproduction. This study, based on China?s statistical data from 1985 to 2007,by employing co-integration theory, Granger causality test and error correction model (ECM),respectively investigates the relationship between consumption, housing consumption and economic growth. The empirical result denotes that there exists bilateral Granger causality relationship between consumption and economic growth. For a long period, there exists long term stable equilibrium relationship between GDP, consumption, and housing consumption; consumption and housing consumption both promote the growth of GDP. Housing consumption?s contribution to the growth of GDP is obviously higher than consumption. For a short period, consumption spurs the growth of GDP more than housing consumption. Keywords:Housing consumption; Economic growth; Co-integration ; ECM; Granger causality test I. INTRODUCTION Consumption is a very important part in social reproduction, and its driving

毕业论文外文翻译模版

长江大学工程技术学院 毕业设计（论文）外文翻译 外 文 题 目 Matlab Based Interactive Simulation Program for 2D Multisegment Mechanical Systems 译 文 题 目 二维多段机械系统基于Matlab 的 交互式仿真程序 系 部 化学工程系 专 业 班 级 化工60801 学 生 姓 名 李泽辉 指 导 教 师 张 铭 辅 导 教 师 张 铭 完 成 日 期 2012.4.15 顶层配置在管路等，要求设备，所有设要求，对调整使案，编是指机确保机组中资料试

外文翻译 二维多段机械系统基于Matlab 的交互式仿真程序 Henryk Josiński, Adam ?witoński, Karol J?drasiak 著；李泽辉 译 摘要：本文介绍了多段机械系统设计原则，代表的是一个模型的一部分的设计系统，然后扩展 形成的几个部分和模型算法的分类与整合的过程，以及简化步骤的过程叫多段系统。本文还介绍了设计过程的二维多段机械系统的数字模型，和使用Matlab 的软件包来实现仿真。本文还讨论测试运行了一个实验，以及几种算法的计算，实现了每个单一步骤的整合。 1 简介 科学家创造了物理模型和数学模型来表示人类在运动中的各种形式。数学模型 使创建数字模型和进行计算机仿真成为可能。模型试验，可以使人们不必真正的实 验就可以虚拟的进行力和力矩的分解。 本文研究的目的是建立一个简单的多段运动模型，以增加模型的连续性和如何 避免不连续为原则。这是创建一个人类运动模型系统的冰山一角。其使用matlab 程 序包创建的数字模型，可以仿真人类运动。 文献中关于这一主题的内容很广泛。运动的模式和力矩的分解在这些文献中都 有涉猎。动态的平面人体运动模型，提出了解决了迭代矩阵的方法。还值得一提的 是这类项目的参考书目，布鲁贝克等人提出了一个模型——人腿模型，这个以人的 物理运动为基础的平面模型仿真了人腿——一个单一的扭簧和冲击碰撞模型。人腿 模型虽然简单，但是它展示人类的步态在水平地面上的运动特征。布鲁贝克等人还 介绍，在人腿模型的双足行走的基础上，从生物力学的角度而言，符合人体步行的 特征。这个模型具有一个躯干，双腿膝盖和脚踝。它能够合理的表现出人多样的步 态风格。一个仿真人类运动的数学模型反应出了人的部分运动状态。 图1. 力的分解 2 力的分解

论文外文翻译

Analysis of the role of complaint management in the context of relationship marketing Author: Leticia Su′arez ′Alvarez, University of Oviedo, Spain Abstract This research aims to contribute to the relationship-marketing strategy by studying the role of complaint management in long-term relationships. Two factors distinguish it from other studies: it takes into account two types of customers, consumers and firms, and the result variable selected is the probability of ending an ongoing relationship. Two questionnaires were designed for every population. One of them was auto-administrated to a sample of consumers in the north of Spain, and the other one was sent to a representative sample of Spanish firms. The data analyses were conducted using structural equation modeling. The findings confirm the importance that theory accords to the relationship-marketing strategy, and also provide evidence for the importance of complaint management. Thus having a good complaint-handling system and trained and motivated staff who are fully committed to the firm’s objectives are fundamental requisites for firms to be able to build a stable customer portfolio. Keywords complaint management; relationship marketing; relationship termination; trust; satisfaction Introduction Nowadays, the main task for tourism firms is undoubtedly to deliver superior value to customers. One way that these firms can achieve part of this value is by maintaining quality relationships with their customers. In fact, it is well known that managing these relationships is critical for achieving corporate success. Thus the general aim of the present research is to analyze the most important factors that contribute to relationship stabilization between tourism firms and their customers. This research canters on retail travel agencies. We chose this particular type of tourism firm for two reasons. First, competition between retail travel agencies is becoming much more intense, fundamentally due to the advent of the Internet as an alternative distribution channel for tourism services (Wang & Cheung, 2004). The second reason is the current phenomenon of disintermediation, or the tendency of some tourism service providers to contact the end-customer directly. Because of these two developments, retail travel agencies urgently need to develop a strategy that allows them to maintain a stable portfolio of customers over time if they are to remain in the market for the long term. In order to achieve the proposed objective, we set out a causal model that incorporates a number of factors that can condition the future of the relationships between travel agencies and their customers. Specifically, we chose two variables that

山东建筑大学本科毕业设计说明书外文文献及翻译格式模版

附件3： （本科毕业论文）文献、资料题目： 院（部） 专 班 姓名：张三 学号： 指导教师：张九光 翻译日期：2005.6.30

，the National Institute of Standards and Technology (NIST) has been working to develop a new encryption standard to keep government information secure ．The organization is in the final stages of an open process of selecting one or more algorithms ，or data-scrambling formulas ，for the new Advanced Encryption Standard (AES) and plans to make adecision by late summer or early fall ．The standard is slated to go into effect next year ． AES is intended to be a stronger ，more efficient successor to Triple Data Encryption Standard (3DES)，which replaced the aging DES ，which was cracked in less than three days in July 1998． “Until we have the AES ，3DES will still offer protection for years to come ．So there is no need to immediately switch over ，”says Edward Roback ， acting chief of the computer security division at NIST and chairman of the AES selection committee ．“What AES will offer is a more efficient algorithm ．It will be a federal standard ，but it will be widely implemented in the IT community ．” According to Roback ，efficiency of the proposed algorithms is measured by how fast they can encrypt and decrypt information ，how fast they can present an encryption key and how much information they can encrypt ． The AES review committee is also looking at how much space the algorithm takes up on a chip and how much memory it requires ．Roback says the selection of a more efficient AES will also result in cost savings and better use of resources ． “DES w as designed for hardware implementations ，and we are now living in a world of much more efficient software ，and we have learned an awful lot about the design of algorithms ，”says Roback ．“When you start multiplying this with the billions of implementations done daily ，the saving on overhead on the networks will be enormous ．” ……