Transient Voltage Suppressors 1500W 1.5KP ROHS
Description
The 1.5KE series is designed specifically to protectsensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
z For surface mounted applications
z Reliable low cost construction utilizing molded plastic technique
z Plastic material has UL flammability classification 94V-O
z Typical IR less than 1uA above 10V
z Fast response time: typically less than 1.0ps from 0 Volts to V BR min
Maximum Ratings And Electrical Characteristics
Value
Unit Parameter Symbol
Peak Pulse Power Dissipation at
P PPM 1500 W
TA=25℃ by 10x1000μs waveform (Fig.1)(Note 1), (Note 2)
Power Dissipation on infinite heat sink at TA=50℃P M(AV) 6.5 W
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) I FSM 200 A
Maximum Instantaneous Forward Voltage at 25A for Unidirectional only
V F 3.5V/5 V
(Note 4)
Operating Junction and Storage Temperature Range T J, T STG-65 to 150 ℃
Typical Thermal Resistance Junction to Lead RθJL 15 ℃/W
Typical Thermal Resistance Junction to Ambient RθJA 75 ℃/W
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.
2.
2. Mounted on 5.0x5.0mm copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only.
4. VF < 3.5V for V BR≤ 200V and VF< 6.5V for VBR ≥ 201V.
Transient Voltage Suppressors 1500W 1.5KP ROHS Rating And Characteristic Curves
Transient Voltage Suppressors 1500W 1.5KP ROHS
For bidirectional type having V RWM of 10 volts and less, the I R limit is double.
For parts without A (V BR is ± 10% and V C is 5% higher than with A parts).
Transient Voltage Suppressors 1500W 1.5KP ROHS Dimensions
Summary of Packing Options
Package Type Description Packing
Quantity
Industry
Standard
DO-201
Embossed Carrier Reel Pack 1000PCS EIA-481-1