Snap-acting
Features/Benefits
?Broad range of operating forces ?Ratings up to 25 AMPS
?Wide variety of actuator styles ?Quick connect terminations
Typical Applications ?Motor controls ?Thermostatics ?Portable tools
Specifications
CONTACT RATING: From low level* to 25 AMPS @ 277 V AC.ELECTRICAL LIFE: 300,000 cycles at 10 AMPS @ 250 V AC,
consult Customer Service Center for typical life of higher rated switches.
INSULATION RESISTANCE: 1,000 M ohm min.
DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –40oF to 185oF (–40oC to 85oC).OPERATING FORCE: From 15 to 400 grams at actuator
button available.
MOUNTING: Torque screws 2-5 in/lbs.
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @20 V AC or DC max. Standard electrical life per UL 1054, rated for 6,000 operations.
Materials
SWITCH HOUSING: Thermoplastic (UL 94V-0).ACTUATOR BUTTON: Thermoplastic (UL 94V-0).SPRING: Copper alloy.PIVOT: Brass alloy.
MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver for ratings greater than 1 AMP up to 15 AMPS.Precious metal alloy for ratings greater than 15 AMPS.STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver for ratings greater than 1 AMP .
TERMINALS: Brass alloy for ratings up to 10 AMPS.
Copper alloy for ratings greater than 10 AMPS.
NOTE: For the latest information regarding RoHS compliance, please go to:https://www.wendangku.net/doc/fc1238148.html,/rohs.
NOTE:Specifications and materials listed above are switches with standard options.For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
T o order , simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-6 through K-10. For additional options not shown in catalog, consult Customer Service Center.
Series
TF SP ,Mom.
Operating Force CJ 5.29 oz./150 grams CC .53 oz./15 grams CD .88 oz./25 grams CF 1.76 oz./50 grams CG 2.65 oz./75 grams
EC 7.94 oz./225 grams EE
14.11 oz./400 grams
Electrical Rating
J615 A,277 V AC; 1/2 HP ,125,250 V AC;
5 A,125 V AC “L”,0.5 A,125 V DC;0.25 A,250 V DC
F5 1 A,125 V AC; 1 A,3O V DC
H85 A,277 V AC; 1/10 HP ,125,250 V AC J321 A,277 V AC; 1 HP ,125 V AC; 2 HP ,
250 V AC; 5 A,125 V AC “L”
K611 A,277 V AC; 1/3 HP ,125,250 V AC;
0.5 A,125 V DC; 0.25 A,250 V DC L125 A,277 V AC; 1.5 HP ,125 V AC; 2 HP ,
250 V AC; 5 A,125 V AC “L”L320 A,250 V AC; 1 HP ,125 V AC;
2 HP 250 V AC
V1 1 A,125 V AC; 1 A,3O V DC (UL/CSA)
V25 A,277 V AC; 1/10 HP ,125,250 V AC (UL/CSA);
5(2) A,250 V AC (VDE)
V311 A,277 V AC; 1/3 HP ,125,250 V AC;
0.5 A,125 V DC; 0.25 A,250 V DC (UL/CSA);10(3) A,25O V AC (VDE)
V421 A,277 V AC; 1 HP ,125 V AC; 2 HP ,25O V AC;
5 A,125 V AC “L”; 16(3) A,25O V AC (VDE)
Actuator
P00Pin plunger
A10.81" lever roller,high force A15 1.34" lever roller,high force A20 1.05”lever roller,low force A25 1.56" lever roller,low force T10.84" lever,high force
T13 1.34" simulated roller,high force T14 1.29" simulated roller,high force T15 1.40" lever,high force T16 2.34" lever,high force T18 2.75" lever,high force T20 1.10" lever,low force
T23 1.56" simulated roller,low force T24 1.50”simulated roller,low force T25 1.62" lever,low force T26 2.57" lever,low force T28 2.97”lever,low force WP0Wide pin plunger
Terminations
40.187"quick connect 4A .250" quick connect
5A .250" offset quick connect 5B .187" offset quick connect
Circuitry C SPDT W SPST N.C.Y SPST N.O.
Mounting Style S Standard V Metric
S n a p -a c t i n
g
TF
MINIATURE SNAP-ACTING SWITCHES – SP MOMENTARY
*Minimums may apply, consult Customer Service Center.
Operating Force option ‘CC’ not available with ‘T18 & T26’ Actuator options.Operating force varies with actuator option, see ACTUATOR option section.
BASIC SWITCH OPERATING
OPTION CODE
FORCE (OZ./GRAMS)
CC
.5315CD .8825CF 1.7650CG 2.6575CJ 5.29150EC 7.94225EE *
14.11400
Consult Customer Service center for availability and delivery of nonstandard ratings.
0.4 VA max. @ 20 V AC or DC max.
@ 30 V DC.21 AMPS @ 277 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC;15 AMPS @ 277 V AC; 1/2 HP @ 125 & 250 V AC; 5 AMPS @ 125 V AC “L”. 0.511 AMPS @ 277 V AC; 1/3 HP @ 125 & 250 V AC; 0.5 AMP @ 125 V DC;
Snap-acting
S STANDARD
For 4-40 screw size
First number represents resistive
rating; second number represents
inductive (motor) rating.
10(3)
Cycles over 10,000 at rated current.
10E3
Cycles over 50,000 at rated current.
50E3
Maximum rated use temperature.
T__
Alternating current.
~
Microgap construction
(less than 3 mm).
m
INTERNATIONAL RATING SYMBOLS
? AVAILABLE
x NOT AVAILABLE
** Available with 4A & 5A terminations only, see page K-10.
All models
Consult Customer Service center for availability and delivery of
nonstandard ratings.
* Low Level=conditions where no arcing occurs during switching, i.e.,
0.4 VA max. @ 20 V AC or DC max.
OPERATING FORCE
ELECTRICAL AMPS CC CD
CF CG CJ EC EE
RATING(REF.)(15)(25)(50)(75)(150)(225)(400)
F51???????
H85???????
J321X X X X???
J615X X X X???
K611X??????
L125X X X X X?X
L320X X X X??X
V11?????X X
V25X X?????
V311X X X????
V416X X X X???
V Metric
For 3 mm screw size
From low level* to 1 AMP @ 125 V AC; 1 AMP @ 30 V DC (UL/CSA).
5 AMPS @ 277 V AC; 1/10 HP @ 125 & 250 V AC (UL/CSA).
11 AMPS @ 277 V AC; 1/3 HP @ 125 & 250 V AC; 0.5 AMP @ 125 V DC;
0.25 AMP @ 250 V DC (UL/CSA). 10 (3) AMPS @ 250 V~m 50E3 T85 (VDE).
21 AMPS @ 277 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC;
NOTE:V1-V4 ratings available with ‘5A or 5B’terminal styles only.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
S n a p -a c t i n
g
NOTE:Switch characteristics chart on following page.
Snap-acting HIGH FORCE, LOW MOTION PIVOT POSITION LOW FORCE, HIGH MOTION PIVOT POSITION
NOTE: Lever actuator options are available in either of two pivot positions.
Levers located in the forward pivot position have lower forces and higher motions.
Levers located in the rear pivot position have higher forces and lower motions.
Available with actuators A10, A15, T10, T13, T14, T15, T16 and T18.Available with actuators A20, A25, T20, T23, T24, T25, T26, and T28.
.030
(0,51)
.047
(1,19)
.010
(0.25)
.21.35.35.53 1.23 1.97 3.88
61010153556110
.53.88 1.76 2.65 5.297.9414.11
15255075150225400
WP0
.235
(5,97)
.500
(12,70)
.100
(2,54)
N/A
.04.04.05.12.21.39
11 1.5 3.5611
N/A
.14.28.42.85 1.27 2.26
4812243664
T26
.125
(3,18)
.250
(6,35)
.055
(1,40)
.04.07.07.07.21.35.99
122261028
.18.28.53.88 1.59 2.47 4.23
5815254570120
T25
.120
(3,05)
.250
(6,35)
.050
(1,27)
.04.07.07.07.21.35.71
122261020
.18.28.56.85 1.69 2.65 4.41
5816244875125
T23
.060
(1,52)
.140
(3,56)
.030
(0,76)
.21.35.35.53.71 1.98 3.88
61010152056110
.53.71 1.41 2.12 4.2369.70
15204060120170275
T20
NOTE:For basic switch operating forces,see page K-6.
.155
(3,94)
.300
(7,62)
.062
(1,57)
N/A
.04.04.07.18.28.56
1125816
N/A
.21.42.71 1.41 2.12 3.53
612204060100
T18
.125
(3,18)
.250
(6,35)
.045
(1,14)
.04.07.07.07.28.35.71
122281020
.18.28.53.78 1.59 2.47 4.23
5815224570120
T16
.065
(1,65)
.110
(2,59)
.030
(0,76)
.07.14.14.18.28.63 2.82
244581880
.25.42 1.06 1.41 2.82 4.417.94
712304*********
T15
.060
(1,52)
.100
(2,54)
.030
(0,76)
.07.14.14.18.35.71 2.82
2445102080
.28.42 1.23 1.76 3.17 4.767.94
812355090135225
T14
.065
(1,65)
.100
(2,54)
.030
(0,76)
.07.14.14.18.35.71 2.82
2445102080
.28.42 1.06 1.593 4.597.94
812304585130225
T13
.030
(0,76)
.060
(1,52)
.015
(0,38)
.21.35.35.53.71 1.98 3.88
61010152056110
.63 1.06 2.29 3.17 6.357.9414.11
18306590180225400
T10
.050
(1,27)
.047
(1,19)
.010
(0,25)
.21.35.35.53 1.23 1.98 3.88
61010153556110
.53.88 1.76 2.65 5.297.9414.11
15255075150225400
P00
.120
(3,05)
.250
(6,35)
.050
(1,27)
.04.07.07.07.21.35.71
122261020
.18.285685 1.69 2.65 4.41
5816244875125
A25
.065
(1,65)
.100
(2,54)
.030
(0,76)
.07.14.14.18.35.71 2.82
2445102080
.28.42 1.06 1.593 4.597.94
812304585130225
A15
.030
(0,76)
.060
(1,52)
.015
(0,38)
.21.35.35.53.71 1.98 3.88
61010152056110
.63 1.06 2.29 3.17 6.357.9414.11
18306590180225400
A10
MINIMUM
OVERTRAVEL
ALL FORCES
MAXIMUM
PRETRAVEL
ALL FORCES
MAXIMUM
DIFFERENTIAL
TRAVEL
ALL FORCES
MINIMUM RELEASE FORCE
(OZ./GRAMS)
MAXIMUM OPERATING FORCE
(OZ./GRAMS)
OPTION
CODE
SWITCH CHARACTERISTICS
2335122040
15204060120170275
A20
0.055
(1,40)
0.12
(3,05)
0.025
(0,64)
0.530.71 1.41 2.12 4.2369.70.070.110.110.180.420.71 1.41
0.11
(2.79)
0.23
(5,84)
.005
(1,27)
T24
122361020
0.040.070.070.110.210.350.71
5816255075135
0.180.280.560.88 1.76 2.65 4.76
0.285
(7,24)
.0.56
(14.22)
0.12
(3,05)
T28
1359
N/A
0.040.110.180.32
N/A N/A
12203055
N/A
0.420.71 1.06 1.94
N/A N/A
C SPDT (Single Pole, Double Throw)
W SPST N.C. (Single Pole, Single Throw, Normally Closed)Y
SPST N.O. (Single Pole, Single Throw, Normally Open)
S n a p -a c t i n g