2A26B

3

Co-Extruded Polyethylene T ape (Blue)

2A26B

Product Description A co-extruded, multi-polymer protective tape with a medium-tack adhesive system.

Typical Physical Properties

General Information

2A26B tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. For optimum performance, 3M protective tapes should be applied and removed at a temperature not less than 60°F (16°C). Avoid prolonged exposure to direct UV sunlight. Prolonged exposure to UV light may affect the tape performance.

Technical Data

November 1, 2000

Note:The following technical information and data should be considered representative

or typical only and should not be used for specification purposes.

ASTM Method

Adhesion to Steel:8 oz./in. width (9 N/100 mm) nominal D-3330T ensile Strength:4500 PSI / 3.1 MPA D-882(Break or Yield)Elongation:

600%

D-882(Break or Yield)T otal T ape Thickness:

2.0 mils (0.05 mm) nominal

D-3652

Product Construction

Backing Adhesive Colors Standard Roll Size

Multi-polymer*

Acrylic

Blue

48 in. (1200 mm), 60 in. (1500 mm),72 in. (1800 mm) x 1000 ft. (304.8 m)to 5000 ft. (1524 m)

*Resins used in the construction of the film backing are proprietary.

Application Ideas

Protection of …

?Metals – aluminum: sheets, coils painted and bronzed; stainless steel: 304 2B finish and textured.

?Architectural Panels and Garage Doors – embossed and smooth painted-flat.?General – solid surface counter tops.

Shelf Life

To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60o - 80oF (16o - 27oC) and 40 - 60% R.H. in the original carton.page 1 of 2

Supersedes September, 1995

Features

?Medium-tack adhesive ?Acrylic adhesive

?Heat resistance

?Enhanced conformability ?Increased break strength

Advantages

?Adheres to lightly textured surfaces without lifting ?Non-staining, stable performance

?Will withstand temperatures up to 30°F (-10°C), higher than many conventional 3-mil LDPE tapes

?Conforms to many products which are subjected to severe forming or fabrication ?Increased break strength provides easier removability without tearing or slivering

Benefits

?Helps save money on reworks

?Clean removal, helps reduce labor costs ?Helps reduce reworks

?Helps reduce reworks

?Helps reduce labor costs

Co-Extruded Polyethylene T ape (Blue)

2A26B

3

Industrial Tape and Specialties Division 3M Center, Building 220-7W-03St. Paul, MN 55144-10001 800 362 3550

1 800 223 7427 Fax on Demand https://www.wendangku.net/doc/ff17474296.html,/industrialtape

?3M IPC 2000All rights reserved.

70-0709-4935-2

T o request additional product information or to arrange for sales assistance, call toll free 1-800-624-4772or 828-465-3053. Address correspondence to: 3M/PolyMask, 500 Thornburg Dr., P .O. Box 309, Conover,NC 28613. Our fax number is 1-800-672-3038 or 828-465-2404.

For Additional Information

If the 3M brand product is proved to be defective, THE EXCLUSIVE REMEDY , A T 3M’S AND SELLER’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REP AIR OR REPLACE THE DEFECTIVE 3M BRAND PRODUCT . 3M and seller shall not otherwise be liable for loss of damages,whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted,including negligence, warranty, or strict liability.

Limitation of Liability

by PolyMask Corporation, a joint venture of 3M and Sealed Air Corporation, and is marketed and sold by 3M.

Features

SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR https://www.wendangku.net/doc/ff17474296.html,er is responsible for determining whether the 3M brand product is fit for a particular purpose and suitable for user ’s method of application. Please remember that many factors can affect the use and performance of a 3M brand product in a particular application. The materials to be bonded with the

product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M brand product.Given the variety of factors that can affect the use and performance of a 3M brand product, some of which are uniquely within the user ’s knowledge and control, it is essential that the user evaluate the

3M brand product to determine whether it is fit for a particular purpose and suitable for the user ’s method of application.

Important Notice

page 2 of 2