当前位置：文档库 › SMS 中德材料对照

SMS 中德材料对照

Comparison of German and Chinese material designations, Basis SN359

Status: 01.01.2006 No guarantee in respect of completeness and substitution of materials!

AEK2 Design Consulting kuwe@https://www.wendangku.net/doc/076030275.html,

Material designation

Basis SN359

Material No.

Former designation

Standard

Remark

Material designation

Standard

Title

Remark

Matching of properties:

E295

1. 0050

St 50-2

DIN EN 10025-2

Q275 Z

GB 700-88

Unalloyed engineering steels

C content 0.28 to 0.38%, only limited weldability, Z = Fully killed steel only is permissible,

identical E335 1. 0060St 60-2DIN EN 10025-2 -Q 345 C GB T 1591-94High strength low alloy structural steels identical E360 1. 0070St 70-2

DIN EN 10025-2 -Q 390 C

GB T 1591-94

High strength low alloy structural steels

identical S235JR 1. 0038

R St 37-2 S235JRG2DIN EN 10025-2

KV at room temperature, unkilled not permitted Q 235 B Q 235 D GB 700-88 GB 700-88Unalloyed engineering steels Unalloyed engineering steels Fully killed steel only is permissible similar identical S275JR

1. 0044St 44-2 S275JRG2

DIN EN 10025-2

KV at room temperature, unkilled not permitted

Q 275 Z

GB 700-88

Unalloyed engineering steels

C content must be limited to

0.22%, otherwise only limited

weldability, notch impact energy not guaranteed.

similar

S355J2 1. 0577St 52-3N S355J2G3

DIN EN 10025-2KV at -20°C, fully killed

steel

Q 345 D GB T 1591-94High strength low alloy structural steels Fully killed steel only is permissible

similar S355JR 1. 0045 -

DIN EN 10025-2

KV at room temperature, unkilled not permitted

Q 345 C GB T 1591-94

High strength low alloy structural steels

Fully killed steel only is

permissible, KV only at room temperature,identical S235J0 1. 0114St 37-3 U DIN EN 10025 (invalid)KV at 0°C

Q 235 C GB 700-88

Unalloyed engineering steels

Fully killed steel only is

permissible, KV at 0°C ,

similar S235J0C 1. 0115Q St 37-3U DIN EN 10025 (invalid)

KV at 0°C, suitable for

cold forming,Q 235 C GB 700-88Unalloyed engineering steels

Fully killed steel only is

permissible, KV at 0°C ,

similar S235J2G3 1. 0116St 37-3N DIN EN 10025 (invalid)KV at -20°C, fully killed

steel Q 235 D GB 700-88Unalloyed engineering steels

Fully killed or double-killed steel only is permissible, KV at -20°C ,

similar S235J2G3C

1. 0118Q St 37-3N DIN EN 10025 (invalid)KV at -20°C, fully killed steel, suitable for cold

forming,Q 235 D

GB 700-88Unalloyed engineering steels

Fully killed or double-killed steel only is permissible, KV at -20°C ,

similar

S235J2G4

1. 0117 -DIN EN 10025 (invalid)

KV at -20°C, fully killed

steel

Q 235 D

GB 700-88Unalloyed engineering steels

Fully killed or double-killed steel only is permissible, KV at -20°C ,

similar S235JR 1. 0037St 37-2DIN EN 10025 (invalid)KV at room temperature,Q 235 A Q 235 B

GB 700-88Unalloyed engineering steels Z = killed only is permissible

do not use similar

S235JRG1 1. 0036U St 37-2DIN EN 10025 (invalid)KV at room temperature,

unkilled

Q 235 A Q 235 B GB 700-88

Unalloyed engineering steels

do not use similar

S235JRG1C

1. 0121

UQ St 37-2

DIN EN 10025 (invalid)

KV at room temperature, unkilled, suitable for cold

forming,

Not known

S275J0 1. 0143St 44-3DIN EN 10025 (invalid)

KV at 0°C

Q 275GB 700-88Unalloyed engineering steels

C content must be limited to 0.22%, notch impact energy not guaranteed.

do not use S275J0C 1. 0140Q St 44-3U DIN EN 10025 (invalid)

KV at 0°C, suitable for

cold forming,Q 275GB 700-88Unalloyed engineering steels

C content must be limited to 0.22%, notch impact energy not guaranteed.

do not use S275J2G3

1. 0144St 44-3N DIN EN 10025 (invalid)KV at -20°C, fully killed

steel

Q 275

GB 700-88Unalloyed engineering steels

C content must be limited to 0.22%, notch impact energy not guaranteed.

do not use

German

Chinese

Engineering steels

S275J2G3C 1. 0141

Q St 44-3N

DIN EN 10025 (invalid)

KV at -20°C, fully killed steel, suitable for cold

forming,

Q 275GB 700-88

Unalloyed engineering steels

C content must be limited to 0.22%, notch impact energy not guaranteed.

do not use S275J2G4 1. 0145 -DIN EN 10025 (invalid)KV at -20°C, fully killed

steel Q 275GB 700-88Unalloyed engineering steels

C content must be limited to 0.22%, notch impact energy not guaranteed.

do not use S275JRC 1. 0128Q St 44-2DIN EN 10025 (invalid)KV at room temperature, suitable for cold forming,

Q 275GB 700-88Unalloyed engineering steels

C content must be limited to 0.22%, notch impact energy not guaranteed.

do not use S355J0 1. 0553 -DIN EN 10025 (invalid)KV at 0°C

16Mn GB 1591-88High strength low alloy structural steels KV only at room temperature, Z= Fully killed steel only is permissible

similar S355J2G3C

1. 0569 -DIN EN 10025 (invalid)

KV at -20°C, fully killed steel, suitable for cold

forming,

16Mn

GB 1591-88

High strength low alloy structural steels

KV only at room temperature, Z= Fully killed steel only is permissible

similar S355N 1. 0545StE 355DIN EN 10025-3normalised, KV at -20°C,

Q 345 D GB T 1591-94High strength low alloy structural steels KV at -20°C similar S355NL 1. 0546TStE 355DIN EN 10025-3normalised KV at -50°C,

Q 345 E GB T 1591-94High strength low alloy structural steels KV at -40°C !

similar S420N

1. 8902

StE 420

DIN EN 10025-3

normalised KV at -20°C,

Q 420 D

GB T 16270-96

High-strength engineering-steel

sheet/plate and strip products, heat-treated or produced by controlled rolling

KV at -20°C !similar

S420NL

1. 8912TStE 420DIN EN 10025-3

normalised KV at -50°C,

Q 420 E

GB T 16270-96

High-strength engineering-steel

sheet/plate and strip products, heat-treated or produced by controlled rolling

KV at -40°C !similar

S460N 1. 8901StE 460DIN EN 10025-3normalised KV at -20°C,

Q 460 D GB T 1591-94High strength low alloy structural steels KV at -20°C !similar S460NL

1. 8903

TStE 460

DIN EN 10025-3

normalised KV at -50°C,

Q 460 E

GB T 1591-94

High strength low alloy structural steels KV at -40°C !

similar

C45 +C or +SH 1. 0503 C 45 DIN EN 10277-245GB 699-88Quality carbon structure steel Z = killed only is permissible similar C15 +C or +SH 1. 0401C15DIN EN 10277-215GB 699-88Quality carbon structure steel Z = killed only is permissible

similar E 295GC +C or +SH

1. 0533

St 50-2 KG

DIN EN 10277-2

Q 275

GB 700-88

Unalloyed engineering steels

similar

Sheets

DC01

1. 0330

St 12

DIN EN 10130

08F

GB 699-88

Plain carbon quality steel

Sameness must be checked in every case

similar

Pipes, tubes

P235TR1

1. 0254

St 37.0

DIN EN 10216-1

normalised

GB 8163-87Seamless tubes for transport of liquids

Limit C content to 0.17%similar 20GB 8162-87Seamless tubes for structures Limit C content to 0.17%similar P235GH 1. 0345St 35.8DIN EN 10216-2normalised 20

GB 8162-87Seamless tubes for structures

Limit C content to 0.17%similar P355N

1.0562StE 355DIN EN 10216-3normalised

16Mn GB 6479-86

Seamless steel tubes for equipment of chemical industry for high pressure service Limit C content to 0.17%

similar 16Mn GB 8162-87 Seamless steel tubes for structural purposes

Limit C content to 0.17%similar 16Mn GB 8163-87

Seamless steel pipes for liquid service

Limit C content to 0.17%similar 16Mn GB/T 8164-87 Strips for welding stel pipe Limit C content to 0.17%similar E235 1.0308 -DIN EN 10305-4

normalised 20GB 8162-87Seamless tubes for structures Limit C content to 0.17%similar St 37.4 NBK

1. 0255St 37.4 NBK DIN 2391normalised

20GB 8163-87Seamless tubes for transport of liquids Limit C content to 0.17%similar 20

GB 8162-87

Seamless tubes for structures

Limit C content to 0.17%

similar Sheets

Fine-grained engineering steels, weldable

Bright steel products for general engineering purposes

Bright steel products, +C = cold drawn +SH = as rolled and

turned

Pipes, tubes

X2CrNiMo 17-12-2 1.4404 -DIN EN 10216-5

DIN EN 10217-7

austenitised0Cr18Ni12Mo2Ti GB T 14975-94Seamless tubes similar

0Cr18Ni12Mo2Ti GB T 14976-94Seamless tubes for liquids similar

1Cr18Ni12Mo2Ti GB 13296-91Seamless boiler and heat exchanger

tubes (austenitic)

similar

X6CrNiTi18-10 1. 4541X10CrNiTi 18 9DIN EN 10216-5

DIN EN 10217-7 austenitised0Cr18Ni10Ti GB 13296-91Seamless boiler and heat exchanger

tubes (austenitic)

similar

0Cr18Ni10Ti GB T 14975-94Seamless tubes similar

0Cr18Ni10Ti GB T 14976-94Seamless tubes for liquids similar

0Cr18Ni10Ti GB 12771-91Welded pipes for transport of liquids similar

0Cr18Ni10Ti GB 13296-91Seamless boiler and heat exchanger

tubes (austenitic)

similar

X6CrNiMoTi17-12-2 1. 4571X10CrNiMoTi 18 10DIN EN 10216-5

DIN EN 10217-7

austenitised0Cr18Ni12Mo2Ti GB T 14975-94Seamless tubes similar

0Cr18Ni12Mo2Ti GB T 14976-94Seamless tubes for liquids similar

1Cr18Ni12Mo2Ti GB 13296-91Seamless boiler and heat exchanger

tubes (austenitic)

similar

C22 +N 1. 0402 C 22 N DIN EN 10083-2normalised20GB 699-88Quality carbon structure steel Z = killed only is permissible identical C35 +N 1. 0501 C 35 N DIN EN 10083-2normalised35GB 699-88Quality carbon structure steel Z = killed only is permissible identical

C35 +QT 1. 0501 C 35 V DIN EN 10083-2quenched & tempered35GB 699-88Quality carbon structure steel Z = killed only is permissible,

Agreement required for QT instead

of normalising.

similar

C35E +QT 1. 1181Ck 35 V DIN EN 10083-1quenched & tempered35GB 699-88Quality carbon structure steel Z = killed only is permissible,

Agreement required for QT instead

of normalising. Yield point at small

nom. thickness differs from

European material.

similar

C45 +N 1. 0503 C 45 N DIN EN 10083-2normalised45GB 699-88Quality carbon structure steel Z = killed only is permissible identical

C45 +QT 1. 0503 C 45 V DIN EN 10083-2quenched & tempered45GB 699-88Quality carbon structure steel Z = killed only is permissible,

Agreement required for QT instead

of normalising.

similar

C45E +QT 1. 1191Ck 45 V DIN EN 10083-1quenched & tempered45GB 699-88Quality carbon structure steel Z = killed only is permissible,

Agreement required for QT instead

of normalising. Yield point at small

nom. thickness differs from

European material.

similar

C55 +QT 1. 0535 C 55 V DIN EN 10083-2quenched & tempered55GB 699-88Quality carbon structure steel Z = killed only is permissible,

Agreement required for QT instead

of normalising.

similar

C55E +QT 1. 1203Ck 55 V DIN EN 10083-1quenched & tempered55GB 699-88Quality carbon structure steel Z = killed only is permissible,

Agreement required for QT instead

of normalising. Yield point at small

nom. thickness differs from

European material.

similar

C60 +N 1. 0601 C 60 N DIN EN 10083-2normalised60GB 699-88Quality carbon structure steel Z = killed only is permissible identical

Cf 35 V 1. 1183.05Cf 35 V DIN 17212quenched & tempered35GB 699-88Plain carbon quality steel Z = killed only is permissible,

Agreement required for QT instead

of normalising.

similar

Cf 45 V 1. 1193.05Cf 45 V DIN 17212quenched & tempered45GB 699-88Plain carbon quality steel Z = killed only is permissible,

Agreement required for QT instead

of normalising.

similar

Cf 55 V 1. 1213.05Cf 55 V DIN 17212quenched & tempered55GB 699-88Plain carbon quality steel Z = killed only is permissible,

Agreement required for QT instead

of normalising.

similar

Qenched and tempered steels, unalloyed Quenched and tempered steels, unalloyed Tubes in stainless steels Tubes in stainless steels

Flame hardening steels

Quenched and tempered steels, alloyed Quenched and tempered steels, alloyed

25CrMo4+QT 1.721825 CrMo 4 V DIN EN 10083-1quenched & tempered 30CrMo GB 3077-88Alloyed structural steels Heat treatment strength to be agreed upon

similar 42CrMo4+QT 1.722542 CrMo 4 V DIN EN 10083-1quenched & tempered 42CrMo GB 3077-88Alloyed structural steels

Heat treatment strength to be agreed upon

similar

50CrMo4+QT 1.722850 CrMo 4 V DIN EN 10083-1quenched & tempered 50CrMo EZB 1184-93(Title not known)34CrNiMo6+QT 1.658234 CrNiMo 6 V DIN EN 10083-1quenched & tempered 34CrNi3Mo EZB 1184-93(Title not known)30CrNiMo8+QT

1.6580

30 CrNiMo 8 V

DIN EN 10083-1

quenched & tempered

30Cr2Ni2Mo

EZB 1184-93

(Title not known)

16MnCr5+TH

1.7131

16 MnCr 5 BF

DIN EN 10084

20CrMnTi GB 3077-88Alloyed structural steels

similar 16MnCr JB T 6396-92

Large forged piece of alloyed structural steel

similar 20MnCr5+TH

1.714720 MnCr 5 BF DIN EN 10084

20CrMnTi GB 3077-88Alloyed structural steels similar 20MnCr JB T 6396-92Large forged piece of alloyed structural

steel

similar 18CrNiMo7-6

1.658717 CrNiMo 6 BF DIN EN 10084

17Cr2Ni2Mo

JB/T 6396-92 EZB 1187-93Large forged piece of alloyed structural steel

similar

X20CrMoV11-1

1.4922

X 22 CrMoV 12 1

DIN EN 10222-2

1Cr11MoV

GB 1221-92

Heat-resisting steels

similar

60WCrV 7 1.255060 WCrV7DIN EN ISO 4957 6 Cr W 2 Si

GB 1299-85Alloyed cold work steel similar 102Cr6

1.2067

100Cr6

DIN EN ISO 4957

Cr2

GB 1299-85

Alloyed cold work steel

similar

X20CrMoV11-1 1.4922X 20 CrMoV 12 1

DIN EN 10222-21Cr11MoV

GB 1221-92Heat-resisting steels

similar 20GB 699-88Quality carbon structure steel

Notch impact energy not guaranteed

do not use 16MnDR GB 3531-96Plate for pressure vessels for use at low temperatures

similar 20Mn2GB 3077-88Alloyed structural steels

similar C22 1.0402 C 22DIN EN 10250-220GB 699-88Quality carbon structure steel

Z = killed only is permissible similar 20Mn5 1.113320 Mn 5DIN EN 10250-220Mn2GB 3077-88Alloyed structural steels

similar C35E 1.1181Ck 35DIN EN 10250-235GB 699-88Quality carbon structure steel Z = killed only is permissible identical C45E

1.1191Ck 45DIN EN 10250-2

45GB 699-88Quality carbon structure steel

Z = killed only is permissible

identical 45H GB 5216-85Structural steels with defined hardenability scatterband

similar C60E 1.1221Ck 60DIN EN 10250-260GB 699-88Quality carbon structure steel

Z = killed only is permissible

identical 25CrMo4 1.721825 CrMo 4DIN EN 10250-330CrMo GB 3077-88Alloyed structural steels similar 34CrMo4 1.722034 CrMo 4DIN EN 10250-335CrMo GB 3077-88Alloyed structural steels similar 42CrMo4 1.722542 CrMo 4DIN EN 10250-342CrMo GB 3077-88Alloyed structural steels similar 50CrMo4 1.722850 CrMo 4DIN EN 10250-350CrMo EZB 1184-93Title not known similar 30CrNiMo8 1.658030 CrNiMo 8DIN EN 10250-330Cr2Ni2Mo EZB 1184-93Title not known similar 34CrNi3Mo Not known 34CrNiMo6 1.658234 CrNiMo 6DIN EN 10250-334CrNiMo EZB 1184-93Title not known

similar 33NiCrMoV14-5

1.695633 NiCrMoV 14 5DIN EN 10250-3Not known Not known X20Cr13

1.4021

X 20 Cr 13

DIN EN 10250-4

2Cr13GB 1220-92Stainless steels (austenitic)

similar 2Cr13GB 1221-92Heat-resisting steels (austenitic)similar 2Cr13GB 8732-88Steel for steam turbine blades

similar SM 2Cr13YB 094-97Slabs for plastic moulds

similar X17CrNi16-2 1.4057X 17 CrNi 16 2DIN EN 10250-41Cr17Ni2GB 1220-92Stainless steels (austenitic)

similar 1Cr17Ni2GB 1221-92Heat-resisting steels (austenitic)

similar

X4CrNi18-10 1.4301X 5 CrNi 18 9DIN EN 10250-40Cr18Ni9GB T 1220-92Stainless steel bar

X6CrNiTi18-10 1.4541X 10 CrNiTi 18 9DIN EN 10250-40Cr18Ni10Ti GB 1220-92Stainless steels (austenitic)

0Cr18Ni10Ti GB 1221-92Heat-resisting steels (austenitic)X6CrNiMoTi17-12-2

1.4571

X 10 CrNiMoTi 18 10

DIN EN 10250-4

0Cr18Ni12Mo2Ti

GB 1220-92

Stainless steels (austenitic)

S355J2G3

1.0570

St 52-3

DIN EN 10250-2

Case hardening steels

Heat-resisting steels

Tool steel

Steels for forgings

Heat-resisting steels

Tool steel

Steels for forgings

X5CrNiMo17-12-2 1.4401X 5 CrNiMo17 12 2

DIN EN 10250-40Cr17Ni12Mo2GB 1220-92Stainless steels (austenitic)

0Cr17Ni12Mo2GB 1221-92Heat-resisting steels (austenitic)

X4CrNiMo16-5-1

1.4418

-DIN EN 10250-4

Not known

X20Cr13 1.4021X 20 Cr 13DIN 17440 DIN EN 10088-1 to 3

X20Cr13GB 1220-92Stainless steels (austenitic)X17CrNi16-2

1.4057

X 17 CrNi 16 2

DIN 17440 DIN EN 10088-1 to 3

1Cr17Ni2GB 1220-92Stainless steels (austenitic)1Cr17Ni2GB 1221-92Heat-resisting steels (austenitic)1Cr17Ni2GB 3280-92Cold-rolled plate and strip (austenitic)1Cr17Ni2GB 4356-84Wire in rod shape 1Cr17Ni2 (-R)GB T 4240-93Wire

1Cr17Ni2

GB T 4231-93Cold-rolled strip in stainless steel for springs

ML1Cr17Ni2GB 4232-93Wire for cold heading

X39CrMo17-1 1.4122X 39 CrMo 17 1DIN 17440 DIN EN 10088-1 to 3

Not known Not known X4CrNi18-10 1.4301X 5 CrNi 18 9DIN 17440 DIN EN 10088-1 to 3

0Cr18Ni9GB 1220-92Stainless steels (austenitic)X5CrNiMo17-12-2 1.4401X 5 CrNiMo17 12 2DIN 17440 DIN EN 10088-1 to 3

0Cr17Ni12Mo2GB 1220-92Stainless steels (austenitic)X6CrNiTi18-10

1.4541

X 10 CrNiTi 18 9

DIN 17440 DIN EN 10088-1 to 3

0Cr18Ni10Ti GB 1220-92Stainless steels (austenitic)

0Cr18Ni10Ti GB 1221-92Heat-resisting steels (austenitic)

0Cr18Ni10Ti GB 3280-92Cold-rolled sheet/plate and strip (austenitic)0Cr18Ni10Ti GB 4237-92Hot-rolled sheet/plate and strip in stainless steel (austenitic)

0Cr18Ni10Ti GB 4238-92Hot-rolled sheet/plate in heat-resisting steel (austenitic)

0Cr18Ni10Ti GB 13296-91Seamless boiler and heat exchanger tubes (austenitic)

0Cr18Ni10Ti GB T 14975-94Seamless tubes

0Cr18Ni10Ti GB T 14976-94Seamless tubes for liquids 0Cr18Ni10Ti GB 4356-84Wire in rod shape

0Cr18Ni10Ti GB 12771-91Welded pipes for transport of liquids 0Cr18Ni10Ti (-Q,-R)

GB T 4240-93Wire

1Cr18Ni11Ti

GB 13296-91Seamless boiler and heat exchanger tubes (austenitic)

H0Cr20Ni10Ti YB T 5092-96Stainless steel wire for welding

X6CrNiMoTi17-12-2

1.4571X 10 CrNiMoTi 18 10

DIN 17440 DIN EN 10088-1 to 3

0Cr18Ni12Mo2Ti

GB T 4237-92

Hot rolled stainless steel sheets and plates

EN-GJL-200EN-JL1030GGL-20DIN EN 1561 -HT20 - 40GB 9439-88Grey iron castings identical HT 200Not known EN-GJL-250EN-JL1040GGL-25DIN EN 1561 -HT25 - 47GB 9439-88Grey iron castings identical HT 250 Not known EN-GJL-300

EN-JL1050

GGL-30

DIN EN 1561

HT3 - 54GB 9439-88Grey iron castings

identical

HT 300

Not known

GJS-400-18U

1062GGG-40DIN EN 1563 -Not known Not known identical

GJS-400-18

1020Not known Not known GJS-400-15U

1072/1073GGG-40DIN EN 1563 -QT 400-15GB 1348-88Spheroidal graphite iron castings identical GJS-400-15

1030QT 400-15GB 1348-88Spheroidal graphite iron castings identical GJS-500-7U

1082/1083GGG-50DIN EN 1563 -QT 500-7GB 1348-88Spheroidal graphite iron castings identical GJS-500-7

1050QT 500-7GB 1348-88Spheroidal graphite iron castings identical GJS-600-3U

1092/1093GGG-60DIN EN 1563

QT 600-3GB 1348-88Spheroidal graphite iron castings identical 1060GB 1348-88

Spheroidal graphite iron castings

Stainless steels

Grey cast iron

Spheroidal graphite cast iron

Grey cast iron

Spheroidal graphite cast iron

GJS-700-2U 1102/1103GGG-70

DIN EN 1563

-QT 700-2GB 1348-88Spheroidal graphite iron castings identical GJS-700-2

1070

QT 700-2GB 1348-88

Spheroidal graphite iron castings

identical

EN-GJMW-360-12EN-JM 1020GTW-S 38-12DIN EN 1562Not known Not known EN-GJMW-400-5

EN-JM 1030

GTW-40-05

DIN EN 1562

Not known

GS200 1. 0449GS-38N DIN EN 10293normalised ZG 200 - 400GB 11352-89General-purpose unalloyed cast steel C content max. 0.18%

similar

GS240

1.O445

GS-45N

DIN EN 10293

normalised

ZG 230 - 450GB 11352-89General-purpose unalloyed cast steel

C content max. 0.30% must be limited to max. 0.23%!

similar ZGD 270 - 480

GB T 14408-93

Low-alloy cast steel for general purpose and structural steel engineering

No composition specification, only

P and S max. 0.040 each do not use

GE300

1.O558GS-60N DIN EN 10293normalised

ZG 310 - 570 GB 11352-89General-purpose unalloyed cast steel Important! C content 0.50 to 0.60 %, only limited weldability.

similar ZG340 - 640GB 11352-89General-purpose unalloyed cast steel

Important! C content 0.50 to 0.60 %, only limited weldability.

similar ZGD 345 - 570

GB T 14408-93

Low-alloy cast steel for general purpose and structural steel engineering

No composition specification, only

P and S max. 0.040 each similar

ZGD 410 - 620

GB T 14408-93

Low-alloy cast steel for general purpose and structural steel engineering No composition specification, only P and S max. 0.040 each similar

G20Mn5 +N or +QT

1 .6220GS-20Mn5V DIN EN 10293quenched & tempered

ZG 20 SiMn JB T 6402-92Castings in low-alloy steel

similar

GS-52N

1.O552GS-52N DIN 1681normalised

ZG 270 - 500GB 11352-89General-purpose unalloyed cast steel

C content max. 0.40% must be limited to 0.35%!

do not use ZGD 290 - 510

GB T 14408-93

Low-alloy cast steel for general purpose and structural steel engineering

No composition specification, only

P and S max. 0.040 each do not use

ZG 310-570

GB 11352-89General-purpose unalloyed cast steel do not use

G28Mn6 +QT1 or QT2 1. 1165GS-30Mn5V DIN EN 10293quenched & tempered ZG 35 SiMn JB T 6402-92Castings in low-alloy steel

similar G26 CrMo4 +QT1 or +QT2 1. 7221GS-25 CrMo4V DIN EN 10293quenched & tempered ZG 20 CrMo EZB 1162-92Title not known

similar G42 CrMo4 +QT1 or QT2 1. 7231GS-42 CrMo4V DIN EN 10293quenched & tempered ZG 42 CrMo JB T 6402-92Castings in low-alloy steel similar G35CrNiMo6-6 +N or +QT1 or

QT2

1. 6582GS-34CrNiMo6V DIN EN 10293quenched & tempered ZG 34 CrNiMo JB T 6402-92Castings in low-alloy steel

similar GS-34 CrMo4V

1. 7220

GS-34 CrMo4V

DIN 17205

quenched & tempered

ZG 35CrMo

EZB 1162-92

Title not known

similar

G42CrMo4 1. 7231GS-42CrMo4SEW 835quenched & tempered ZG 42 CrMo JB ZQ 4297-88 Alloyed cast steels. Non-standardised cast steels.

similar G50CrMo4

1. 7232

GS-50CrMo4

SEW 835

quenched & tempered

ZG 50 CrMo

JB ZQ 4297-88

Alloyed cast steels. Non-standardised cast steels.

similar

GP240GH+N 1.O619GS-C25N DIN EN 10213-2normalised ZG 230-450EZB 1165-93Title not known similar GP240GH+QT 1.O619GS-C25V DIN EN 10213-2quenched & tempered ZG 230-450EZB 1165-93Title not known

similar

G20Mo5+QT 1. 5419GS-22Mo4V DIN EN 10213-2quenched & tempered Not known Not known G17CrMo5-5+QT 1. 7357GS-17CrMo55V DIN EN 10213-2quenched & tempered ZG 20CrMoV JB / T 7024-93Title not known C content higher, V alloyed, Rm and Re identical

similar G17CrMoV5-10+QT 1. 7706GS-17CrMoV5 11V DIN EN 10213-2quenched & tempered ZG 15Cr1Mo1V JB / T 7024-93Title not known

Cr content higher, Rm and Re lower

similar

GX23CrMoV12-1+QT

1. 4931

G-X22CrMoV12 1V

DIN EN 10213-2

quenched & tempered

Not known

Malleable cast iron

General purpose cast steel

Quenched and tempered steel castings

Flame and induction hardening steel castings

Heat-resistant steel castings

GX 120Mn12 1. 3401

-without standard -

ZG MN 13-1GB 5680-98Austenitic cast steels with high manganese content

similar

Not known -without standard ZG MN 13-2GB 5680-98Austenitic cast steels with high manganese content

Not known -without standard ZG MN 13-3GB 5680-98Austenitic cast steels with high manganese content

Not known

-without standard

ZG MN 13-4

GB 5680-98

Austenitic cast steels with high manganese content

GK-CuSn10Zn -GK-S1DIN EN 1982ZCuSn10Zn2GB/T 1176-1987Specification for cast copper alloys

CuSn7Zn4Pb7-C-GS CC493K-GS G-CuSn7ZnPb DIN EN 1982ZCuSn7Zn4Pb6EZB 1179-93Title not known CuSn7Zn4Pb7-C-GZ CC493K-GZ GZ-CuSn7ZnPb DIN EN 1982ZCuSn7Zn4Pb6EZB 1179-93Title not known CuSn7Zn4Pb7-C-GC

CC493K-GC

GC-CuSn7ZnPb

DIN EN 1982

ZCuSn7Zn4Pb6

EZB 1179-93

Title not known

CuSn12-C-GS CC483K-GS G-CuSn12DIN EN 1982ZCuSn12Pb1EZB 1179-93Title not known CuSn12-C-GZ

CC483K-GZ

GZ-CuSn12

DIN EN 1982

ZCuSn12Ni2EZB 1179-93Title not known

ZCuSn10Pb1

Not known CuSn12-C-GC CC483K-GC GC-CuSn12DIN EN 1982ZCuSn12Ni2EZB 1179-93Title not known CuSn12Ni2-C-GS CC484K-GS G-CuSn12Ni DIN EN 1982ZCuSn12Ni2EZB 1179-93Title not known CuSn12Ni2-C-GZ CC484K-GZ GZ-CuSn12Ni DIN EN 1982ZCuSn12Ni2EZB 1179-93Title not known CuSn12Ni2-C-GC CC484K-GC GC-CuSn12Ni DIN EN 1982ZCuSn12Ni2EZB 1179-93Title not known CuSn11Pb2-C-GS CC482K-GS G-CuSn12Pb DIN EN 1982ZCuSn12Pb1EZB 1179-93Title not known CuSn11Pb2-C-GZ CC482K-GZ GZ-CuSn12Pb DIN EN 1982ZCuSn12Pb1EZB 1179-93Title not known CuSn11Pb2-C-GC

CC482K-GC

GC-CuSn12Pb

DIN EN 1982

ZCuSn12Pb1

EZB 1179-93

Title not known CuSn10Pb10-C-GS CC495K-GS G-CuPb10Sn DIN EN 1982ZCuPb10Sn10GB/T 1176-1987Specification for cast copper alloys CuSn10Pb10-C-GZ

CC495K-GZ

GZ-CuPb10Sn

DIN EN 1982

ZCuPb10Sn10

GB/T 1176-1987

Specification for cast copper alloys

CuAl10Fe5Ni5-C-GS CC333G-GS G-CuAl10Ni DIN EN 1982ZCuAl10Ni6Fe5EZB 1179-93Title not known CuAl10Fe5Ni5-C-GZ

CC333G-GZ

GZ-CuAl10Ni

DIN EN 1982

ZCuAl10Ni6Fe5

EZB 1179-93

Title not known

CuZn35Mn2Al1Fe1-GS CC765-GS G-CuZn35Al1DIN EN 1982ZCuZn35Al1Fe1Mn2EZB 1179-93Title not known CuZn35Mn2Al1Fe1-GZ CC765-GZ GZ-CuZn35Al1DIN EN 1982ZCuZn35Al1Fe1Mn2EZB 1179-93Title not known CuZn34Mn3Al2Fe1-C-GS CC764-GS G-CuZn34Al2DIN EN 1982ZCuZn34Al2Fe2Mn3EZB 1179-93Title not known CuZn34Mn3Al2Fe1-C-GZ CC764-GZ GZ-CuZn34Al2DIN EN 1982ZCuZn34Al2Fe2Mn3EZB 1179-93Title not known CuZn25Al5Mn4Fe3-C-GS CC762-GS G-CuZn25Al5DIN EN 1982ZCuZn25Al5Fe3Mn4EZB 1179-93Title not known CuZn25Al5Mn4Fe3-C-GZ CC762-GZ GZ-CuZn25Al5DIN EN 1982ZCuZn25Al5Fe3Mn4

EZB 1179-93Title not known

CuZn37Mn3Al2PbSi-R540

CW713R-R540

CuZn40Al2F54

DIN EN 12164

Not known

Manganese steel castings, austenitic

Copper-aluminium cast alloys

Copper-zinc cast alloys (cast special brass)

Copper-aluminium cast alloys

Copper-zinc cast alloys (cast special brass)

Copper-lead-tin cast alloys

Copper-tin-zinc cast alloys (red brass)

Copper-tin cast alloys (tin bronze)

中外金属材料对照表

常用国内外钢材牌号对照表中国美国日本德国英国法国前苏联国际标准化组织 GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT ISO 630 品名牌号牌号牌号牌号牌号牌号牌号 Q195 Cr.B Cr.C SS330 SPHC SPHD S185 040 A10 S185 S185 CT1K П CTlC П CTl ПC Q215A Cr.C Cr.58 SS 330 SPHC 040 A12 CT2K П—2 CT2C П—2 CT2ПC —2 Q235A Cr.D SS400 SM400A 080A15 CT3K П—2 CT3C П—2 CT3ПC —2 E235B Q235B Cr.D SS400 SM400A S235JR S235JRGl S235JRG2 S235JR S235JRGl S235JRG2 S235JR S235JRGl S235JRG2 CT3K П—3 CT3C П—3 CT3ПC —3 E235B Q255A SS400 SM400A CT4K П—2 CT4C П—2 CT4ПC —2 普通碳素结构钢 Q275 SS490 CT5C П—2 CT5ПC —2 E275A

中国美国日本德国英国法国前苏联国际标准化组织 GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT IS0 630 品名牌号牌号牌号牌号牌号牌号牌号 08F 1008 1010 SPHD SPHE 040A10 80K П 10 1010 S10C S12C CKl0 040A12 XCl0 10 C101 15 1015 S15C S17C CKl5 Fe360B 08M15 XCl2 Fe306B 15 C15E4 20 1020 S20C S22C C22 IC22 C22 20 25 1025 S25C S28C C25 IC25 C25 25 C25E4 40 1040 S40C S43C C40 IC40 080M40 C40 40 C40E4 45 1045 S45C S48C C45 IC45 080A47 C45 45 C45E4 50 1050 S50C S53C C50 IC50 080M50 C50 50 C50E4 优质碳素结构钢 15Mn 1019 080A15 15r

中德金属材料对照表_2007

Comparison of German and Chinese material designations, Basic SN359 No guarantee in respect of completeness and substitution of materials!ATE2 Standardisiation department kuwe@https://www.wendangku.net/doc/076030275.html, Material designation Basis SN359Material No. Former designation Standard Remark Material designation Standard Title Remark Matching of properties: E295 1. 0050St 50-2DIN EN 10025-2 -Q275 Z GB 700-88Unalloyed engineering steels C content 0.28 to 0.38%, only limited weldability, Z = Fully killed steel only is permissible,identical E335 1. 0060St 60-2DIN EN 10025-2 -Q 345 A GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible identical E360 1. 0070St 70-2DIN EN 10025-2 -Q 390 A GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible identical S235JR 1. 0038St 37-2 R St 37-2 S235JRG2DIN EN 10025-2KV at room temperature, unkilled not permitted Q 235 B GB 700-88 Unalloyed engineering steels Fully killed steel is permissible identical S235J0 1. 0114R St 37-3 S235J0G2DIN EN 10025-2KV at 0°C, unkilled not permitted Q 235 C GB 700-88Unalloyed engineering steels Fully killed steel only permissible, KV at 0°C ,similar S235J2 1. 0117Q St 37-3N S235J2G3DIN EN 10025-2KV at -20°C, unkilled not permitted Q 235 D GB 700-88Unalloyed engineering steels Fully killed or double-killed steel is permissible, KV at -20°C ,similar S275JR 1. 0044St 44-2 S275JRG2 S275JRC DIN EN 10025-2KV at room temperature, unkilled not permitted Q 275 Z GB 700-88Unalloyed engineering steels C content must be limited to 0.22%, otherwise only limited weldability, notch impact energy not guaranteed.similar Q 275 GB 700-88Unalloyed engineering steels C content must be limited to 0.22%, notch impact energy not guaranteed.do not use Q 345 C GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible, KV at 0°C, similar Q 275GB 700-88Unalloyed engineering steels C content must be limited to 0.22%, notch impact energy not guaranteed. do not use Q 345 D GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible, KV at -20°C., identical S355JR 1. 0045 -DIN EN 10025-2KV at room temperature, unkilled not permitted Q 345 B GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible, identical S355J0 1. 0553S355J0G2DIN EN 10025-2KV at 0°C, unkilled not permitted Q 345 C GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible, KV at room 0°C,identical S355J2 1. 0569S355J2G3DIN EN 10025-2KV at -20°C, unkilled not permitted Q 345 D GB T 1591-94High strength low alloy structural steels Fully killed steel is permissible, KV at -20°C.,identical S355N 1. 0545StE 355DIN EN 10025-3normalised, KV at -20°C,Q 345 D GB T 1591-94High strength low alloy structural steels KV at -20°C similar S355NL 1. 0546TStE 355DIN EN 10025-3normalised KV at -50°C,Q 345 E GB T 1591-94High strength low alloy structural steels KV at -40°C !similar S420N 1. 8902StE 420DIN EN 10025-3normalised KV at -20°C,Q 420 D GB T 1591-94High strength low alloy structural steels KV at -20°C !similar S420NL 1. 8912TStE 420DIN EN 10025-3normalised KV at -50°C,Q 420 E GB T 1591-94High strength low alloy structural steels KV at -40°C !similar S460N 1. 8901StE 460DIN EN 10025-3normalised KV at -20°C,Q 460 D GB T 1591-94High strength low alloy structural steels KV at -20°C !similar S460NL 1. 8903TStE 460DIN EN 10025-3normalised KV at -50°C,Q 460 E GB T 1591-94High strength low alloy structural steels KV at -40°C !similar German Chinese Engineering steels Fine-grained engineering steels, weldable DIN EN 10025-2Status: 01.05.2007 in progress KV at 0°C, unkilled not permitted S275J2 1. 0145St 44-3N S275J2G3 S275J2G3C S275J2G4DIN EN 10025-2KV at -20°C, unkilled not permitted S275J0 1. 0143St 44-3

国内外金属材料牌号对照表

国内外金属材料牌号对照表国内外常用灰铸铁牌号对照序号国别铸 1 中国— HT350 HT300 HT250 HT200 HT150 HT100 2 日本— FC350 FC300 FC250 FC200 FC150 FC100 3 美国 NO.60 NO.50 NO.45 NO.35 NO.30 NO.20 — 4 前苏联CЧ40 CЧ3 5 CЧ30 CЧ25 CЧ20 CЧ15 CЧ10 5 德国 GG40 GG35 GG30 GG25 GG20 GG15 — 6 意大利— G35 G30 G25 G20 G15 G10 7 法国 FGL400 FGL350 FGL300 FGL250 FGL200 FGL150 — 8 英国— 350 300 250 200 150 100 9 波兰 Z140 Z135 Z130 Z125 Z120 Z115 — 10 印度 FG400 FG350 FG300 FG260 FG200 FG150 — 11 罗马尼亚 FC400 FC350 FC300 FC250 FC200 FC150 — 12 西班牙— FG35 FG30 FG25 FG20 FG15 — 13 比利时 FGG40 FGG35 FGG30 FGG25 FGG20 FGG15 FGG10 14 澳大利亚 T400 T350 T300 T260 T220 T150 — 15 瑞典 O140 O135 O130 O125 O120 O115 O110 16 匈牙利 OV40 OV35 OV30 OV25 OV20 OV15 — 17 保加利亚— Vch35 Vch30 Vch25 Vch20 Vch15 — 国际标准18 — 350 300 250 200 150 100 (ISO) 泛美标准19 FG400 FG350 FG300 FG250 FG200 FG150 FG100 (COPANT) 20 中国台湾—— FC300 FC250 FC200 FC150 FC100 21 荷兰— GG35 GG30 GG25 GG20 GG15 — 22 卢森堡 FGG40 FGG35 FGG30 FGG25 FGG20 FGG15 — 23 奥地利— GG35 GG30 GG25 GG20 GG15 — 国内外常用球墨铸铁牌号对照

国标和德标金属材料对照表

最佳答案 1.紧固件对照件序号中国德国 1 GB65-85 ISO1207 2 GB5782-86 ISO4014 GB5783-86 3 GB5782-86 ISO4017 GB5783-86 4 GB6170-86 ISO4032 5 GB2510-81 ISO4379 6 GB827-86 ISO8746 7 GB879-86 ISO8752 8 GB91-86 DIN94 9 GB95-85 DIN125 10 JB/ZQ4349-86 DIN422 11 GB853-88 DIN434 12 DIN471 13 DIN472 14 JB/ZQ4446-86 DIN906 15 JB/ZQ4444-86 DIN908 16 GB70-85 DIN912 17 GB78-85 DIN914 18 GB5782-86 DIN931 19 GB6184-86 DIN980 20 GB812-88 DIN981 21 GB11263-89 DIN1025 22 GB707-85 DIN1026 23 GB9787-88 DIN1028 24 GB9788-88 DIN1029 25 GB2510-81 DIN1850 26 GB8163-87 DIN2448 27 DIN6336 28 GB1096-79 DIN6885 29 GB2673-86 DIN7991 30 GB93-87 DIN7980 JB/ZQ4340-97 SN778 31 JB/ZQ4454-86 DIN7603 32 GB7277-87 DIN31211 33 GB10603-89 DIN82101 34 GB704-88 EN10029 35 GB119-86 SN530 36 GB/T1230 SN808

中德材料对照表1

中德常用金属材料对照表Comparison List For Standard Material 一、普通碳素结构钢Carbon structure steel Page 1 of 15 *Remark:20MnMo will be used for forged material

一、碳素结构钢Carbon structure steel Page 2 of 15 （a）V：调质处理quenching and tempering；（b）①为调质处理时参数parameter after quenching and tempering。

一、碳素结构钢Carbon structure steel Page 3 of 15 注：N：正火。 Note:N-normalizing

二、合金结构钢Alloy structure steel Page 4 of 15 Note： ① For section ≤100,QT；② When section≤ 120，QT；③When section is 15，QT；④ When section is 25，QT；⑤ When section is 30，QT。* If the bill of material(b.o.m) will not request the “V”(quench and temper) the material will be converted without the +QT by CMMP If the material “+QT” will not be available, CMMP will do the quenching and tempering to reach the requested material properties.

钢材表-中德对照表

摘要:钢材表-中德对照表优质碳素结构钢中国德国材料分组 Y15 10S20(1.0721) 抗拉强度〈700MPa Y20 22S20(1.0724) 抗拉强度〈700MPa Y30 35S20(1.0726) 抗拉强度〈700MPa 优质碳素结构钢中国德国材料分组 10 CK10(1.1121) 抗拉强度〈700MPa 15 C15(1.0401),CK15(1.1141),Cm15(1.1140) 抗拉强度〈700MPa 35 C35(1.0501),CK35(1.1181),Cm35(1.1180) 抗拉强度〈700MPa 45 C45(1.0503),CK45(1.1191),Cm45(1.1201) 抗拉强度700MPa~1000MPa 55 C55(1.0535),CK55(1.1181),Cm55(1.1209) 抗拉强度700MPa~1000MPa 60 C60(1.0601),CK60(1.1221),Cm60(1.1223) 抗拉强度700MPa~1000MPa 15Mn 17Mn4(1.8044) 抗拉强度〈700MPa 40Mn 40Mn4(1.5038) 抗拉强度700MPa~1000MPa 合金结构钢中国德国材料分组 30Mn2 28Mn6(1.5065),30Mn5(1.5066) 抗拉强度〈700MPa 35Mn2 36Mn5(1.5067) 抗拉强度〈700MPa 35SiMn 37MnSi5(1.5122) 42SiMn 46MnSi4(1.5121) 15MnV 15MnV5(1.5213) 42Mn2V 42MnVT(1.5223) 35Cr 34Cr4(1.7033),37Cr4(1.7034) 抗拉强度700MPa~1000MPa 40Cr 41Cr4(1.7035) 抗拉强度1000MPa~1300MPa 15CrMn 20MnCr4(1.7147) 抗拉强度700MPa~1000MPa 20CrV 22CrV4(1.7513) 40CrV 42CrV6(1.7561) 50CrV 50CrV4(1.8159) 抗拉强度1000MPa~1300MPa 16Mo 15Mo3(1.5415) 抗拉强度〈700MPa 12CrMo 13CrMo44(1.7335) 抗拉强度〈700MPa 15CrMo 16CrMo44(1.7337) 抗拉强度700MPa~1000MPa 20CrMo 25CrMo4(1.7218) 抗拉强度700MPa~1000MPa 30CrMo 34CrMo4(1.7220) 抗拉强度1000MPa~1300MPa 35CrMo 34CrMo4(1.7220) 抗拉强度1000MPa~1300MPa 42CrMo 42CrMo4(1.7225) 抗拉强度1000MPa~1300MPa 38CrMoAl 34CrAlMo5(1.8507) 抗拉强度700MPa~1000MPa 15CrMnMo 15CrMo5(1.7262) 抗拉强度700MPa~1000MPa 20CrMnMo 20CrMo5(1.7264) 抗拉强度700MPa~1000MPa 24CrMoV 24CrMoV55(1.7733) 12CrNi3A 14NiCr10(1.5732) 抗拉强度〈700MPa

国标和德标金属材料对照表

————————————————————————————————作者：————————————————————————————————日期：

最佳答案 1.紧固件对照件序号中国德国 1 GB65-85 ISO1207 2 GB5782-86 ISO4014 GB5783-86 3 GB5782-86 ISO4017 GB5783-86 4 GB6170-86 ISO4032 5 GB2510-81 ISO4379 6 GB827-86 ISO8746 7 GB879-86 ISO8752 8 GB91-86 DIN94 9 GB95-85 DIN125 10 JB/ZQ4349-86 DIN422 11 GB853-88 DIN434 12 GB894.1-86 DIN471 13 GB893.1-86 DIN472 14 JB/ZQ4446-86 DIN906 15 JB/ZQ4444-86 DIN908 16 GB70-85 DIN912 17 GB78-85 DIN914 18 GB5782-86 DIN931 19 GB6184-86 DIN980 20 GB812-88 DIN981 21 GB11263-89 DIN1025 22 GB707-85 DIN1026 23 GB9787-88 DIN1028 24 GB9788-88 DIN1029 25 GB2510-81 DIN1850 26 GB8163-87 DIN2448 27 GB4141.29-84 DIN6336 28 GB1096-79 DIN6885 29 GB2673-86 DIN7991 30 GB93-87 DIN7980 JB/ZQ4340-97 SN778 31 JB/ZQ4454-86 DIN7603 32 GB7277-87 DIN31211 33 GB10603-89 DIN82101 34 GB704-88 EN10029 35 GB119-86 SN530 36 GB/T1230 SN808

中德钢材牌号对照

机械加工中德钢材牌号对照 https://www.wendangku.net/doc/076030275.html, CNC数控机械加工,瑞典三坐标测量机自动测量,零件出口德国瑞士,提供可靠的信赖协作德国牌号中国牌号德国牌号中国牌号 1.0035Q195 1.0517C46D2 1.0038Q235C48D2 1.0038Q235qC 1.0518C56D2 1.0044Q275 1.052830/Mn 1.0045Q345qC 1.053555 1.0114Q235 1.054150 1.0117Q235/qD C42D2 1.0143Q275 1.0546Q345/qE 1.0145Q275 1.0553Q345 1.0213ML08Al 1.0577Q345/qD 1.021410 1.0586C50D2 ML10Al 1.0588C52D2 ML10 1.0596Q345 1.023415 1.060160/Mn ML15Al 1.0609C58D2 ML15 1.0611C62D2 1.0303ML04Al 1.0612C66D2/B 1.0304C8D265 1.031C10D2 1.0613C68D2 1.0311C12D2 1.061475 1.031205F C76D2 1.0319S210（1类） 1.0615C70D2 1.034708*70 1.040220/Mn 1.061685 1.040625C86D2 1.041120 1.0617C72D2 ML20Al 1.0618C92D2 ML20 1.0622 80 1.0413C15D2C80D2 1.0414C20D2 1.0626C82D2 1.041525Mn 1.0628C88D2 C26D2 1.0715Y15 1.0416C18D2 1.0718T15Pb 1.0434ML18 1.0722Y12Pb 1.0438HRB500 1.0725Y20 1.0459S245（1类）/（2类） 1.0726Y12/30/35 1.0466HRB500 1.1147ML18Mn 1.047320Mn2/A/E ML22Mn 1.0483S290（1类）/（2类） 1.1152ML25 1.0499S360（1类）/（2类） 1.1172ML35/Mn 1.050135/Mn 1.119145H 1.050345/Mn 1.1192ML45 1.051140/Mn 1.120145H 1.0516C36D2 1.40020Cr13Al C38D2 德国牌号中国牌号德国牌号中国牌号 1.40061Cr12/13 1.48282Cr21Ni2N 1Cr12Mo1Cr20Ni14Si2 1.4016ML1Cr17 1.4833 2Cr23Ni13 1Cr170Cr23Ni13 1.40212Cr13 1.48412Cr25Ni20 1.40241Cr13Mo 1.48451Cr25Ni20Si2 1.40283Cr13 1.48641Cr16Ni35 1.40314Cr13 1.48715Cr21Mn9Ni4N 1.40571Cr17Ni2 1.48780Cr18Ni10Ti 1.4105Y1Cr17 1.502655Si2Mn 1.41097Cr17 1.5502ML20B 1.41131Cr17Mo 1.5514ML35B 1.412511Cr17 1.551540B/A/E 9Cr18Mo 1.5525ML20MnB

中德钢材对照表

No guarantee in respect of completeness and substitution of materials!ATL2 Standardisation

No guarantee in respect of completeness and substitution of materials!ATL2 Standardisation German Chinese Basis: SN 359 Material designation Mat. No. Former designat.Standard Remark Material designation Standard Title Remark Matching of properties: Qenched and tempered steels, unalloyed Quenched and tempered steels, unalloyed C22 +N 1. 0402 C 22 N DIN EN 10083-2normalised20GB 699-88Plain carbon quality steel identical C35 +N 1. 0501 C 35 N DIN EN 10083-2normalised35GB 699-88Plain carbon quality steel identical C35 +QT 1. 0501 C 35 V quenched & tempered35GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising.similar C35E +QT 1. 1181Ck 35 V DIN EN 10083-1quenched & tempered35GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising. Yield point similar at small nom. thickness differs from European material. C45 +N 1. 0503 C 45 N DIN EN 10083-2normalised45GB 699-88Plain carbon quality steel identical C45 +QT 1. 0503 C 45 V quenched & tempered45GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising.similar C45E +QT 1. 1191Ck 45 V DIN EN 10083-1quenched & tempered45GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising. Yield point similar at small nom. thickness differs from European material. C55 +QT 1. 0535 C 55 V DIN EN 10083-2quenched & tempered55GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising.similar similar C55E +QT 1. 1203Ck 55 V DIN EN 10083-1quenched & tempered55GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising. Yield point at small nom. thickness differs from European material. C60 +N 1. 0601 C 60 N DIN EN 10083-2normalised60GB 699-88Plain carbon quality steel identical Flame hardening steels Flame hardening steels Cf 35 V 1. 1183.05Cf 35 V DIN 17212quenched & tempered35GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising.similar Cf 45 V 1. 1193.05Cf 45 V DIN 17212quenched & tempered45GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising.similar Cf 55 V 1. 1213.05Cf 55 V DIN 17212quenched & tempered55GB 699-88Plain carbon quality steel Agreement required for QT instead of normalising.similar Quenched and tempered steels, alloyed Quenched and tempered steels, alloyed 25CrMo4+QT 1.721825 CrMo 4 V DIN EN 10083-1quenched & tempered30CrMo GB 3077-88Alloyed structural steels Heat treatment strength to be agreed upon similar 42CrMo4+QT 1.722542 CrMo 4 V DIN EN 10083-1quenched & tempered42CrMo GB 3077-88Alloyed structural steels Heat treatment strength to be agreed upon similar 50CrMo4+QT 1.722850 CrMo 4 V DIN EN 10083-1quenched & tempered50CrMo EZB 1184-93(Title not known) 34CrNiMo6+QT 1.658234 CrNiMo 6 V DIN EN 10083-1quenched & tempered34CrNi3Mo EZB 1184-93(Title not known) 30CrNiMo8+QT 1.658030 CrNiMo 8 V DIN EN 10083-1quenched & tempered30Cr2Ni2Mo EZB 1184-93(Title not known) Case hardening steels Case hardening steels 16MnCr5+TH 1.713116 MnCr 5 BF DIN EN 1008420CrMnTi GB 3077-88Alloyed structural steels 16MnCr JB T 6396-92Large forged piece of alloyed structural steel 20MnCr5+TH 1.714720 MnCr 5 BF DIN EN 1008420CrMnTi GB 3077-88Alloyed structural steels 20MnCr JB T 6396-92Large forged piece of alloyed structural steel 18CrNiMo7-6+TH 1.658717 CrNiMo 6 BF DIN EN 10084Not known Not known